37
Views
1
CrossRef citations to date
0
Altmetric
Articles

Biodegradation of dye-containing wastewater by fusant strains using a sequential anaerobic–aerobic process

, , , &
Pages 18888-18896 | Received 17 Dec 2014, Accepted 05 Sep 2015, Published online: 25 Sep 2015
 

Abstract

A fusant strain T1, which was constructed by protoplast fusion between Acinetobacter sp. SRL8, Escherichia sp. XBR68 and Acinetobacter sp. RC10, could simultaneously decolorize three different dyes, namely reactive brilliant blue XBR, disperse orange SRL, and red base RC. Maximum decolorization of initial 30 mg L−1 was achieved at pH 7.0, 35°C and 3% inoculum (v/v) under anaerobic condition during 24 h incubation. The decolorization ratio for XBR, SRL, and RC by the strain T1 could reach 91.5, 87.6, and 65.7%, respectively. Supplementation with appropriate concentration of glucose (0.2%, w/v) in the decolorization reaction system could further enhance decolorization percent. The strain T1 was highly tolerant to three different dyes up to 400 mg L−1. Biological decolorization of the three different dyes by the strain T1 was investigated in a sequential anaerobic/aerobic process. The reaction system was operated at room temperature. The results indicated that over 95% color removal was obtained in anaerobic process and 97.6% COD removal occurred in the aerobic process.

Acknowledgments

The research was financially funded by the grants “National Natural Science Foundation” (Project No. 11275033) and the Talent Introduction Foundation of Changzhou University (No. ZMF13020003).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.