EDITORS-IN-CHIEF
Marco di Prisco, Politecnico di Milano, Italy
Christian La Borderie, ISA BTP-LaSAGeC2 /Université de Pau et des Pays de l’Adour, France
Franc¸ois Nicot, Irstea – Grenoble, Saint-Martin-d’Héres, France
ASSOCIATE EDITORS
Manuel Pastor, ETS de Ingenieros de Caminos, Madrid, Spain
Franc¸ois Toutlemonde, LCPC Paris, France
Laurent Vulliet, EPF Lausanne, Suisse
Richard Wan, University of Calgary, Canada
HONORARY EDITORS
Jean-Armand Calgaro, CGPC, France
Felix Darve, INP Grenoble, France
Jean-Pierre Ollivier, INSA Toulouse, France
EDITORIAL BOARD MEMBERS
P. Acker, Lafarge, Centre de recherche, Saint-Quentin-Fallavier, France
C. Andrade Perdrix, Institute Eduardo Torroja of Construction Science, Madrid, Spain
G. Ballivy, Faculté de Génie civil, Universitéde Sherbrooke (Québec), Canada
V. Baroghel-Bouny, LCPC, Paris, France
L. Bertolini, Politecnico di Milano, Italy
P. Bisch, Groupe IOSIS, Montreuil, France
R. de Borst, Eindhoven University of Technology, The Netherlands
D. Breysse, Laboratoire Ghymac, Université Bordeaux 1, France
P. de Buhan, Ecole nationale des Ponts et Chaussées, Marne-la-Vallée, France
B. Cambou, INRETS, Arcueil, France
L. Cascini, University of Salerno, Italy
R. Charlier, ArGenCo, institut de Génie civil et mécanique, Liége, Belgique
F. Collin, FNRS, Université de Liége, Belgique
O. Coussy, LCPC, Paris, France
C. Cremona, Commissariat général au développement durable, Paris, France
A. Delaplace, LMT Cachan, France
J. Desrues, CNRS Laboratoire 3S-R, Grenoble, France
H. Di Benedetto, DGCB/ENTPE, Vaulx-en-Velin, France
C. Di Prisco, Politecnico di Milano, Italy
M. S. El Youssoufi, LMGC, Montpellier, France
J.-M. Fleureau, Laboratoire MSSMat, Ecole Centrale Paris, France
J. Gril, LMGC, Montpellier, France
I. Herle, Institute of Geotechnical Engineering, Universit€at Dresden, Germany
P.-Y. Hicher, Institut GEM, Ecole centrale de Nantes, France
A. Jullien, LCPC, Paris, France
M. Karstunen, University of Strathclyde, Glasgow, United Kingdom
D. Kolymbas, Institute of Infrastructure, University of Innsbruck, Austria
T. Kretz, Centre des Techniques d’Ouvrages d’Art, Se´tra, Bagneux, France
L. Laloui, LMS - EPFL, Lausanne, Suisse
F. Larrard, LCPC, Paris, France
M. Lemaire, IFMA, Aubie´re, France
G. Manfredi, University of Naples Federico II, Naples, Italy
F. Masrouri, INPL/LAEGO, Nancy-Université, France
J. Mazars, Laboratoire 3S-R, Institut Polytechnique de Grenoble, France
G. Meschke, Ruhr University Bochum, Germany
A. Millard, CEA/DM2S/LM2S, CEN Saclay, Gif-sur-Yvette, France
J.-P. Muzeau, Polytech-Clermont-Ferrand, Université Blaise Pascal, Aubiére, France
D. A. Nethercot, Imperial College London, University Education, United Kingdom
R. Neves, Instituto Superior Técnico, Lisboa, Portugal
L.-O. Nilsson, Laboratory of Building Materials, Faculty of Engineering, Lund, Sweden
R. Nova, Milan University of Technology, Italy
A. Pecker, Géodynamique et Structure, Bagneux, France
C. Petit, Université de Limoges, France
G. Pijaudier-Cabot, Laboratoire des fluides complexes, Anglet, France
J.-M. Reynouard, INSA Lyon, France
M. Savoia, University of Bologna, Italy
A. Sellier, LMDC, Université de Toulouse, France
J.-F. Semblat, LCPC, Paris, France
I. Shahrour, Laboratoire de mécanique de Lille, Université Lille 1, France
J.-F. Shao, Polytech-Lille, Université Lille 1, France
L. Taerwe, Laboratoire Magnel, Universite´ de Gand, Belgique
J. M. Torrenti, LCPC, Paris, France
K. van Breugel, Delft University of Technology, The Netherlands
P. Vezole, EIFFAGE Construction, Vélizy-Villacoublay, France