266
Views
6
CrossRef citations to date
0
Altmetric
Articles

Analysis of the internal stability of coarse granular materials according to various criteria

, , , , , & show all
Pages 936-953 | Received 30 Mar 2015, Accepted 15 Jul 2015, Published online: 07 Sep 2015
 

Abstract

Flow tests under high hydraulic gradients were carried out to estimate the internal stability of various granular materials with grains ranging from .08 to 16 mm. Twenty grain size distributions were tested, either continuous or discontinuous (gap-graded). After the tests, the materials were separated into three layers and the grain size distribution of each layer was measured. The soils were classified as stable if the maximum difference between the passing percentages of the upper and lower layer did not exceed 5% and as unstable otherwise. The experimental data were compared with the results given by some internal stability criteria which are obased on very different approaches. The same method was applied to about 40 soils from the literature. It was found that the simple criterion of Kézdi, which consists in separating the soils into ‘coarse’ and ‘fine’ fractions at different values of the diameter and applying Terzaghi filter rule to the two fractions, led to global agreement with the experimental data, whereas the two other criteria gave unsatisfactory results. However, a few differences were noted between Kézdi classification and the results of the tests, showing the need for further research, especially in one case (over 65) where the soil was classified as stable and proved unstable.

Disclosure statement

No potential conflict of interest was reported by the authors.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.