145
Views
3
CrossRef citations to date
0
Altmetric
Original Articles

Influence of low fines content on the liquefaction resistance of sands

, , &
Pages 6012-6031 | Received 03 Sep 2020, Accepted 03 May 2021, Published online: 21 May 2021
 

Abstract

This paper presents a study of the influence of plastic and non-plastic fines on the resistance of sands to liquefaction. The study is carried out with the aid of a triaxial apparatus on reconstituted sand-fines mixtures at low fines content (≤ 5%). A description of the soils used in this study is first presented followed by the presentation of results of undrained monotonic liquefaction tests performed on sand specimens containing different fines fractions. Experimental results show that the increase in non-plastic fines content up to 5% increases the resistance of sand to liquefaction. Whereas the increase in plastic fines content reveals a decrease in the latter. This result is due to the contribution of the non-plastic fine particles to the overall chain forces and therefore they increase the resistance against liquefaction, however the decrease in the resistance with plastic fines could be attributed to their nature that lead to the sliding between the sand grains and therefore favour the contractancy of the whole specimen.

Disclosure statement

No potential conflict of interest was reported by the authors.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.