159
Views
0
CrossRef citations to date
0
Altmetric
Brief Reports

A Case Study on the Effects of Foam and Seat Pan Inclination on the Deformation of Seated Buttocks Using MRI

, , &
Pages 23-32 | Received 15 Mar 2021, Accepted 20 Sep 2021, Published online: 14 Oct 2021
 

OCCUPATIONAL APPLICATIONS

We investigated the effects of seat pan inclination and foam on the deformation of the seated buttocks using an upright MRI system. From observations among four healthy males, we found that soft tissue deformation under the ischial tuberosity (IT) could be reduced not only by using a soft cushion, but also by decreasing the shear force on the seat pan surface. These results suggest that soft tissue deformation could be used as an objective measure for assessing seating discomfort and injury risk, by accounting for the effects of both contact pressure and shear. We also confirmed that the gluteus maximus (GM) muscle displaced away from the IT once seated. As peak pressure and shear are most likely located below the IT, more realistic computational human body models in this region are needed that consider muscle sliding.

TECHNICAL ABSTRACT

Background: A full understanding of soft tissue deformations, particularly in the gluteal region in a seated position, would be helpful for improving seat comfort and reducing the injury risk of seated people. Thanks to recent developments in medical imaging, direct observations of soft-tissue deformations under realistic loading conditions is now possible using open MRI.

Purpose: The purpose of this work was to investigate the effects of seat pan inclination and foam on the deformation of soft tissues in the gluteal region using an open MRI.

Methods: Four healthy male participants completed the experiment, in which a positional MRI scanner was used to scan the buttocks and part of the thighs. Three seating conditions were tested by varying the seat pan angle (A_SP) and cushion material while the backrest was fixed at 22 degrees from the vertical: 1) A_SP = 7° without foam (Reference); 2) A_SP = 0° without foam (Shear); 3) A_SP = 7° with a 50 mm thick foam on the seat pan (Foam). In addition, one configuration (Unloaded), with the buttocks being unsupported, was also scanned for comparison. After segmenting images, we calculated the volumes of the gluteus maximus (GM) muscle and subcutaneous fat in three regions of interest under the ischial tuberosity (IT) for each condition.

Results: Once seated, the GM displaced away from the IT laterally and posteriorly. For all participants, the largest tissue deformation was observed in the Shear condition, while the smallest was found in the Foam condition.

Conclusions: The present study provides quantitative data needed for validating buttock-thigh finite element models. Future work is needed to link soft tissue deformation with discomfort perception.

Conflict of Interest

The authors declare no conflict of interest.

Supplemental Material

Supplemental data [material/appendices] for this article can be accessed on the publisher’s website at [DOI].

Acknowledgments

The authors thank Andréa Gavard for her participation in data processing and Richard Roussillon for his assistance in conception and building the mock-up used in the experiment and the European Scanning Center for MRI scanning.

Additional information

Funding

The work is partly supported by Direction Générale de l'Aviation Civile (project n°2014 930818).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.