2
Views
0
CrossRef citations to date
0
Altmetric
Research Article

The Influence of Probe Fiber Distance on Laser Doppler Perfusion Monitoring Measurements

, , , &
Pages 433-441 | Published online: 10 Jul 2009
 

Abstract

Laser Doppler perfusion monitoring (LDPM) is a noninvasive technique for monitoring skin microcirculation. The aim of this article was to investigate the influence of fiber separation on clinical LDPM measurements. A dual-channel LDPM system was used in combination with a probe that consists of two sets of detection fibers, at 0.2 and 1.0 mm from the illuminating fiber. Measurements were performed at the big toe of 8 healthy subjects and 11 subjects who had vascular disorders. In most cases, fluxes detected at both fiber distances showed very similar fluctuations. For each fiber separation, flux values of healthy subjects and patients were not significantly different. Furthermore, skin temperature (range: 22–34°C) influenced the toe's pulp microcirculation markedly, increasing similarly at both probe separations, with a higher flux at a separation of 1.0 mm than at 0.2 mm. The flux ratio signal, obtained by dividing the flux at 0.2 mm by the flux at 1.0 mm, was significantly different between the two groups (p< 0.05). In conclusion, the flux detected in vivoby means of LDPM, is influenced by the distance between the optical fibers. Use of the flux ratio with a multiseparation probe deserves attention as it is a possible marker for discriminating normal tissue perfusion from pathological skin tissue perfusion, independently from tissue temperature. Microcirculation(2003) 10,433–441. doi:10.1038/sj.mn.7800207

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.