Combined Microwave/Fluidized Bed Drying of Fresh Peppercorns

Abstract

A fluidized bed dryer (FBD) and a combined microwave/fluidized bed dryer (CMFD) are used to dry the fresh ripe peppercorns. The average moisture content vs. elapsed drying time, and drying rate vs. average moisture content are experimentally investigated. It is found that the microwave field from the CMFD can increase the potential of the conventional fluidized bed drying. The drying rates of both dryers are dependent on the inlet air temperature and velocity. For the CMFD, the effects of the air velocity on the drying rate are found to be opposite to our previous results tested with white pepper seeds i.e., the drying rates of the fresh ripe peppercorns decreased with increasing air velocity. By using a CMFD, the drying time required to reach the desired moisture content can be reduced to 80–90% of the drying time required for a FBD at the same drying air temperature and velocity. The color of the product dried by a CMFD is also attractive: it becomes flaming yellow, instead of black as obtained from a FBD. The physical structure of the peppercorn, before and after the drying process is also investigated by a metallurgical macroscope and an image analyzer. Different from drying by a FBD, the external form and matter of the white pepper seed are still maintained, even after passing through the drying process.

Keywords:

• Fluidized bed drying
• Microwave drying
• Fresh peppercorn

Acknowledgments

The authors wish to acknowledge Mr. Porjai Asavasuparuek, Mr. Pisut Thamsuriya, and Mr. Peeraphan Rungpiboon for their generous assistance during the experiments, the Department of Production Engineering, King Mongkut's University of Technology Thonburi for the use of their metallurgical macroscope and image analyzer, and the Thailand Research Fund for financial support.