Experimental Investigation and Practical Application of Superheated Steam Drying Technology for Softwood Timber

Abstract

Due to several advantages, superheated steam drying of timber has attracted great attention. However, the technology is still restricted to some special cases, partly due to the lack of fully understanding of the drying process. In this work, experiments were conducted to dry radiata pine timber using superheated steam under vacuum and at pressure. In the first part of the experiments, softwood timber was dried in a superheated steam kiln with drying rates, steam temperature across the stack and wood temperature being measured during drying. In the second part of the work, experimental studies were performed to investigate potential applications of the superheated steam drying at ultra-high temperatures (UHT) and pressurized steam conditioning of kiln dried timber. Compared to normal drying temperatures, the UHT drying can reduce the drying time by a factor of 5 to 10 and it is also more energy efficient. The pressurized steam conditioning has been proven to be a promising technology to relieve drying stresses and to reduce twist of the dried timer.

^†This work was presented at 9th APCChE Conference, 29 September, 2002, Christchurch, New Zealand.

Keywords:

• Drying rate
• Drying quality
• Residual stress
• Steam pressure
• Wood distortion

Notes

^†This work was presented at 9th APCChE Conference, 29 September, 2002, Christchurch, New Zealand.