Abstract
The wetting properties of polyamide 6 rods treated with radiofrequency (RF) low-temperature plasma (LTP) using three different non-polymerizing gases (air, nitrogen and water vapour) were determined using the Wilhelmy contact-angle technique. Information on the acidic or basic nature of the ionizable groups generated on the rod surface was obtained using contact-angle titration. The wettability obtained depends on the plasma gas used, and it tends to decrease with time elapsed after the treatment when the samples are kept in an air environment. However, the wettability can be recovered by immersion of the aged samples in water. The degree of recovery depends on the plasma gas used and the highest recovery was obtained with water vapour plasma treated samples. Both ageing and recovery behaviour can be attributed to the reorganisation of hydrophilic groups which tend to reversibly migrate or orient towards the bulk phase depending on the storage conditions, although other factors can also have influence.