100
Views
9
CrossRef citations to date
0
Altmetric
Articles

UHF RFID H-Shaped Tag Antenna using Microstrip Feed Design on Metallic Objects

, &
Pages 1828-1839 | Published online: 03 Apr 2012
 

Abstract

A novel UHF RFID antenna structure that can stick on metallic surface is presented. A printed H-shaped antenna by using microstrip feed structure on system ground which has the same size as antenna and operated at its halfwavelength (λ/2) mode as the fundamental resonant mode is designed. The printed H-shaped antenna generates about 925 MHz operations. Further, the proposed antenna has a simple planar structure and occupies only a small area of 13 × 66 mm2 on the system circuit board. By using the inductive property of the microstrip line with short end to match the capacitive reactance of tag chip, the performance in free space on metallic surface was measured. The matched impedance bandwidth (VSWR < 2) of the proposed antenna in free space was measured in the frequency range 830–951 MHz. The proposed antenna with good matched impedance, high direction radiation patterns, compact size, low-profile, low cost and measured reading range (5–6 m) in free-space can be suitable for UHF RFID applications.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.