Microstructural changes in Mo steels during sintering and effect on electrical conductivity

Abstract

An electrical conductivity measurement method was used for studying the sintering mechanism and microstructural changes of low alloyed PM Mo steels in a temperature range between 600-1300°C. The influences of alloying method (elemental or prealloyed), Mo content (1·5 and 3·5 wt-%), and sintering temperature were investigated. The results show that the effects of, for example, formation of Mo carbide(s), ferrite-austenite phase transformation, as well as liquid phase formation during heating of the steel compacts can be detected by the technique cited. Mo dissolution during sintering of compacts from mixed powders results in a decrease of the conductivity with increasing sintering temperature while compacts from Fe-Mo prealloyed powders exhibit the standard behaviour of higher conductivity after sintering at higher temperature. Moreover, the relationship between Mo dissolution, formation of sintered contacts, and mechanical properties was demonstrated to assess the viability of the conductivity measurement method for studying the sintering behaviour of PM materials and its influence on physical and mechanical properties. An approach was also demonstrated for relating the conductivity to the microstructural parameters, e.g. total porosity and contiguity between solid phase, that would be useful for predicting relative changes in mechanical properties dependent on porosity and pore morphology.