Abstract
The conventional powder metallurgy (PM) approach of compaction and sintering has been used extensively in the fabrication of tungsten alloys and composite hardmetals based on WC-Co. In fact, these are some of the earliest known materials to have been fabricated by the PM route. The last 15-20 years have seen the emergence of a new shaping technique of powder injection moulding (PIM) which can shape such tungsten metal alloys and composites into complex near net shaped components. The PIM process starts with the mixing of an organic binder with the desired powders in the form of a homogeneous mixture, known as a feedstock. The feedstock, like plastics, can be moulded into near net shapes from which the organic part is removed and then the material can be sintered to almost theoretical density. This produces complex, near net shaped parts that have properties that are comparable to that of the press and sintered materials. This paper will provide a brief overview of the use of PIM in tungsten based alloys and composites and discuss some of the applications of these materials.