![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
The heat treatment response of a spray formed Cu – 2.4Ni – 0.6Si (wt-%) alloy has been investigated. The spray formed alloy was given various thermomechanical treatments prior to isothermal aging. These treatments included solutionising and/or cold rolling with different reductions in original thickness. The variation in hardness and electrical conductivity of the alloys was measured as a function of the aging time. The results indicated the highest peak hardness value of ~250 kg mm-2 for the alloy aged after solution treatment and cold rolling to 40% reduction in thickness, compared with the maximum hardness of 220 kg mm-2 for specimens aged directly in the as spray formed condition. However, the electrical conductivity after aging was observed to be a maximum of 65%IACS (International Annealed Copper Standard) in specimens cold rolled to 80% reduction in thickness before aging. The aging response was observed to accelerate with the degree of cold working. Optical, scanning electron and transmission electron microscopy were used for microstructural characterisation of the materials. Precipitation of the second phase was observed to dominate in deformation bands. The alloy showed evidence of discontinuous precipitation, particularly when the alloys were cold rolled before aging. The onset of discontinuous precipitation led to a drastic deterioration in hardness of the alloys. The precipitation behaviour of the alloy is discussed in the light of microstructural characteristics associated with various processing conditions of the alloy.