Abstract
In the present work, the effects of nickel with chromium and of varying heat input on the microstructure and toughness of the grain coarsened heat affected zone (GCHAZ) of a low carbon steel were investigated. In the welding experiments, low carbon steel specimens having five different combinations of nickel and chromium content (0·9Ni–0·3Cr, 1·9Ni–0·8Cr, 2·8Ni–1·3Cr, 3·8 Ni–1·7Cr, and 4·9Ni–2·1Cr, all wt%) were welded using a submerged arc welding process with heat inputs of 0·5, 1, and 2 kJ mm-1. Following welding, the microstructure, hardness, and toughness of the GCHAZs were investigated. From the results, attempts were made to establish a relationship between heat input, nickel and chromium contents, microstructure, hardness, and toughness of the GCHAZ. Charpy impact testing and microstructural observation showed that, for a heat input of 0·5 kJ mm-1, nickel plus chromium contents in the range 1·9Ni–0·8Cr to 4·9Ni–2·1Cr promoted the formation of martensite, thereby producing lower toughness values. It was subsequently found that, taking into consideration the microstructure, hardness, and toughness of the GCHAZ, an intermediate heat input (1 kJ mm-1) gave higher toughness values for all nickel and chromium contents. However, it was observed that satisfactory toughness values could not be obtained by varying the heat input for the 3·8Ni–1·7Cr and 4·9Ni–2·1Cr steels.