![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
Abstract
Recent advances in direct metal laser sintering (DMLS) have improved this technique considerably; however, it still remains limited in terms of material versatility and controllability of laser processing. In the present work, a multicomponent Cu based metal powder, which consisted of a mixture of Cu, Cu–10Sn and Cu–8·4P powder, was developed for DMLS. Sound sintering activities and high densification response were obtained by optimising the powder characteristics and manipulating the processing conditions. Investigations on the microstructural evolution in the laser sintered powder show that liquid phase sintering with partial or complete melting of the binder (Cu–10Sn), but non-melting of the cores of structural metal (Cu) acts as the feasible mechanism of particle bonding. The additive phosphorus acts as a fluxing agent to protect the Cu particles from oxidation and shows a concentration along grain boundaries owing to the low solubility of P in Cu and the short thermal cycle of laser sintering. A directionally solidified microstructure consisting of significantly refined grains is formed, which may be ascribed to laser induced non-equilibrium effects such as high temperature gradient and rapid solidification.
