![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
Local melting of eutectic films and cracking is found in Al 2024 and Al 7075 alloy friction stir spot welds. Dissolution of melted films removes all evidence melted film formation in spot welds made using typical welding parameter settings. For this reason friction stir spot welding is carried out at a rapid plunge rate of 10 mm s−1 and an extremely short dwell time of 0·05 s and after tool retraction, the welded samples are rapidly quenched using a mixture of methanol and liquid nitrogen at a temperature of −80°C. Eutectic films rich in Zn and Cu are formed in Al 7075 spot welds while melted Al2CuMg particles promote the formation of α-Al+Al2CuMg eutectic films in Al 2024 spot welds. Melted eutectic formation and cracking is also observed beneath the tip of the rotating pin during Al 7075 friction stir spot welding and is consistent with the occurrence of melt wear in this location.
