Nanoscale chemistry and mechanical properties of tribofilms on Al–Si alloy (A383): interaction of ZDDP, calcium detergent and molybdenum friction modifier

Abstract

The interaction of a friction modifier and a calcium phenate detergent additive, with zinc dialkyl dithiophosphates (ZDDPs) in the formation of antiwear films on A383, has been studied using synchrotron radiation and nanoindentation techniques. X-ray absorption near edge structure (XANES) spectroscopy has shown that films prepared from oils containing both ZDDP and detergent, and ZDDP and molybdenum dithiocarbamate (MoDTC), are chemically similar to, but thicker than those made from oils containing only ZDDP. In addition, wear was greatly reduced in the presence of the detergent which was correlated with the basicity and the presence of the friction modifier. The phosphorus K and L edge XANES spectra show that the tribofilms are polyphosphate glasses of similar nature to those found on steel, but characterised by a shorter chain length. The sulphur K edge shows a MoS₂ like film and under certain conditions, the presence of a sulphate species is detected. High resolution topographic images and mechanical properties were determined by atomic force microscopy and imaging nanoindentation. The films formed in the presence of the detergent exhibited similar mechanical responses independent of the conditions tested. The indentation modulus of the films on the Al matrix always appear much softer than the films formed on the Si grains whether or not the lubricant contains only ZDDP, or both ZDDP and MoDTC.

Keywords:

• ANTIWEAR FILMS
• ZDDPS
• XANES
• MODTC
• CA PHENATE