4
Views
20
CrossRef citations to date
0
Altmetric
Original Articles

Individualized Catenary Curves: Their Relationship to Arch Form and Perimeter

, Ph.D., B.D.S., M.Orth., L.D.S.R.C.S.(Eng.)
Pages 21-28 | Accepted 01 Nov 1994, Published online: 21 Jun 2016
 

Abstract

Study casts of the lower arches of 35 children in whom arch alignment was considered acceptable, were examined using a reflex microscope. Arch perimeter was calculated mathematically from a method which required measurement of the mesio-distal widths of the teeth only. This was described as the ‘overlap’ method. Arch perimeter was also calculated using individualized catenary curves for each subject. Two calculations were made, recording arch width either at the distal contact points of the first permanent molars or between their mesio-buccal cusps.

Arch perimeter measured from the length of the catenary curves was consistently shorter than that calculted by the overlap method. The variation ranged from 0·02 to 4·58 mm. The catenary constructed using the distal molar contacts gave a better representation of the actual arch form: the mean discrepancy was 2·36 mm, compared with 2·86 mm with the second method where arch width was measured between mesio-buccal cusps. Both techniques for calculation of arch perimeter were heghly reproducible.

The catenary curve only approximated arch form well when the arch was relatively narrow across the inter canine region. For square arches this method was unsatisfactory. It is suggested that alternative techniques would be more reliable and the overlap method desribed here is considered satisfactory.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.