Influence of Lubricants on Dimensional Changes and Mechanical Properties of Sintered Ferrous Compacts

Abstract

The influence of admixed zinc stéarate on the shrinkage of uniaxially pressed iron powder compacts has been studied. For pressing conditions which caused inhibition of compaction the removal of the stéarate during sintering produced an increase in shrinkage parallel to the pressing axis and in direct proportion to lubricant content. Additions of stearic acid (varying particle size), zinc stearate, lithium stearate, stearamide, and Cosmic 64 wax were used to investigate the influence of lubricant on mechanical properties of green and sintered iron powder compacts. Green strength was reduced relative to unlubricated material only by lubricants whose physical and chemical properties enabled them to produce and maintain extensive interparticle films during pressing. Vapour from the rapid initial decomposition of lubricants which reduced green strength could have a deleterious physical influence on the tensile strength of dewaxed or sintered Fe compacts. Decomposing lubricants also produced undesirable chemical effects. These arose from reactions between lubricant decomposition products and the matrix or by these products interfering with reactions between matrix and sintering atmosphere.