Effects of Immersion in Water on Deterioration of Wood from Five Species of Trees Used for Habitat Enhancement Projects

Abstract

Logs of standard dimensions from five species of trees were submerged in a stream to evaluate changes in strength and decomposition over a period of 5 years. Changes in structural properties occurred only for wood near the outer surface of the logs. Nearly all bark was removed from the logs within 12 months. Diameter loss for the five species ranged from 10.6 mm (western hemlock Tsuga heterophylla) to 21.8 mm (bigleaf maple Acer macrophyllum) after 5 years. Decreases in the density of surface wood for the five species ranged from 23% (red alder Alnus rubra) to 31% (western hemlock). Modulus of rupture, modulus of elasticity, and wood density did not change for wood more than 12 mm from the log surface for any of the species. Bigleaf maple exhibited the highest resistance to rupture, and western redcedar Thuja plicata exhibited the lowest. Western redcedar was also the most easily flexed. Microbial activity on the surface of the logs was highest at the start of the experiment and decreased rapidly with time of immersion. The two hardwood species (bigleaf maple and red alder) generally had higher levels of microbial activity than the conifer species (Douglas fir Pseudotsuga menzesii, western hemlock, western redcedar) from 12 months through 60 months of immersion. Differences in the rate of decomposition between conifer and hardwood logs were much less than in terrestrial environments. Our results suggest that hardwood logs can be used in stream enhancement projects where the wood will be submerged.