Adhesion between glass fiber posts and resin cement: evaluation of bond strength after various pre-treatments

Abstract

Purpose. To evaluate surface roughness and bond strength of glass fiber posts to a resin cement after various surface treatments. Materials and methods. Sixty individually formed glass fiber posts with a diameter of 1.5 mm and a length of 20 mm were used for this study. They were randomly assigned to six groups of pre-treatment (n = 10/group): Group C, untreated (control); Group SB, sandblasted; Group SC, silica coated; Group HF, hydrofluoric acid-etched; Group N, Nd:YAG laser irradiated; Group E, Er:YAG laser irradiated. Surface roughness of the posts was measured before and after pre-treatment. The posts were then bonded to resin cement and tensile bond strengths were determined in a universal testing machine. For statistical analysis, two-way ANOVA and post-hoc comparison tests (α = 0.05) were performed. Results. The highest bond strength value was observed in group HF, followed by group SC. There was a statistically significant difference in bond strength between group C and groups HF, SC and E (p < 0.001, p = 0.002 and p = 0.041, respectively). Posts of group SB and group N showed the highest surface roughness. Conclusions. The findings of the present study reveal that hydrofluoric acid-etching, silica coating and Er:YAG laser irradiation provided a significant increase in bond strength between glass fiber posts and resin cement.

Key Words::

• acid-etch
• bond strength
• glass fiber post
• laser
• sandblasting
• silica coating

Acknowledgements

This investigation was supported in part by the Cumhuriyet University Scientific Research Project. This study was presented in a poster at the annual meeting of the 19th Aegean Region Chambers of Dentists International Scientific Congress and Exhibition, 26–28 April, 2012, Fethiye, Turkey.

Declaration of interest: The authors report no conflicts of interest. The authors alone are responsible for the content and writing of the paper.