Interstitial microwave transition from hyperthermia to ablation: Historical perspectives and current trends in thermal therapy

Abstract

This work reviews the transition from hyperthermia to ablation for cancer treatment with interstitial microwave (MW) antennas. Early work utilising MW energy for thermal treatment of cancer tissue began in the late 1970s using single antennas applied interstitially or the use of multiple interstitial antennas driven with the same phase and equal power at 915 or 2450 MHz. The original antenna designs utilised monopole or dipole configurations. Early work in thermal therapy in the hyperthermia field eventually led to utilisation of these antennas and methods for MW ablation of tumours. Efforts to boost the radiated MW power levels while decreasing antenna shaft temperatures led to incorporation of internally cooled antennas for ablation. To address larger tumours, MW treatment utilised arrays that were simultaneously activated by either non-synchronous or synchronous phase operation, benefiting both hyperthermia and ablation strategies. Numerical modelling was used to provide treatment planning guidance for hyperthermia treatments and is expected to provide a similar benefit for ablation therapy. Although this is primarily a review paper, some new data are included. These new data show that three antennas with 2.5 cm spacing at 45 W/channel and 10 min resulted in a volume of 89.8 cm³ when operated synchronously, but only 53.4 cm³ non-synchronously. Efficiency was 1.1 (synchronous) versus 0.7 (non-synchronous). MW systems, treatment planning, and image guidance continue to evolve to provide better tools and options for clinicians and patients in order to provide better approach and targeting optimisation with the goal of improved treatment for the patient.

• thermal therapy
• interstitial
• microwave ablation
• microwave hyperthermia
• synchronous arrays