Errors between two-and three-dimensional thermal model predictions of hyperthermia treatments

Abstract

A simulation program to study the three-dimensional temperature distributions produced by hyperthermia in anatomically realistic inhomogenous tissue models has been developed using the bioheat transfer equation. The anatomical data for the inhomogeneous tissues of the human body are entered on a digitizing tablet from serial computed tomography (CT) scans. Power deposition patterns from various heating modalities must be calculated independently. The program has been used to comparatively evaluate two-and three-dimensional simulations in a series of parametric calculations based on a simple inhomogeneous tissue model for uniform power deposition. The conclusions are mat two-dimensional simulations always lead to significant errors at the ends of tumors (up to tens of degrees). However, they can give valid results for the central region of large tumors, but only with tumor blood perfusions greater than approximately 1 kg/m³/s. These conclusions from the geometrically simple model are substantiated by the results obtained using the full three-dimensional model for actual patient anatomical simulations. In summary, three-dimensional simulations will be necessary for accurate patient treatment planning. The effect of the thermal conductivity, used in the models, on the temperature field has also been studied. The results show that using any thermal conductivity value in the range of 0.4 to 0.6 W/m/°C sufficiently characterizes most soft tissues, especially in the presence of high blood perfusion. However, bone (thermal conductivity of 1.16 W/m/°C) and fat (thermal conductivity of 0.2 W/m/°C) do not fit this generalization and significant errors result if soft tissue values are used.