34
Views
54
CrossRef citations to date
0
Altmetric
Original Article

Temperature distributions during clinical scanned, focused ultrasound hyperthermia treatments

, , , , , & show all
Pages 891-908 | Received 16 May 1989, Accepted 03 Jan 1990, Published online: 09 Jul 2009
 

Abstract

In this study a scanned focused ultrasound (SFUS) system was used to heat 66 tumours at various anatomical locations in 52 patients. A total of 160 treatments were given. On average, temperatures were measured in 14 or 15 locations in the scanned volume. The time-averaged temperatures over the 30 min treatment period in the best treatment of each tumour were 44.0 ± 2.4°C (mean ± SD) and 39.6 ± 1.5°C at the location of the highest and lowest sensor, respectively. On average, 39% of the sensors were above 42.5°C. When only the cases that were judged to be good candidates for the hyperthermia device were analysed, 64% of the sensors reached a temperature over 42.5°C with the highest temperature achieved being 45.9±2.3°C and the lowest 40.7 ± 1.4°C. Although the system tested has many technical limitations (for example, fixed frequency, beam geometry and power during the scan cycle), the results demonstrate that therapeutic temperatures can be achieved in many tumours. Significantly better temperatures are expected when all of the theoretical potential of scanned focused ultrasound systems has been used.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.