9
Views
12
CrossRef citations to date
0
Altmetric
Original Article

Heating pattern of helical microwave intracavitary oesophageal applicator

, , &
Pages 577-586 | Received 05 Mar 1990, Accepted 03 Dec 1990, Published online: 09 Jul 2009
 

Abstract

Helical microwave intracavitary oesophageal (HMIO) applicators were designed to operate at frequencies of 433 MHz and 915 MHz. Heating patterns were studied within muscle-equivalent phantom by thermographic camera and fibreoptic thermometers. The results showed that frequency significantly influenced the microwave heating pattern. The 433 MHz applicator had a single power deposition region, the longitudinal specific absorption rate (SAR) distribution appeared to be nearly even, and the maximum SAR value occurred close to the centre of the active length of the applicator. The 915 MHz applicator had two power deposition regions, the peak SAR values occurred at about 1/4 and 3/4 of the active length respectively, The radial SAR distribution suggested that there is no obvious difference between the 433 MHz and 915 MHz applicators in that the average radial penetration of 50% surface SAR (RP50) was about 0.65 cm. It was also shown that power deposition was axially symmetric for both 433 MHz and 915 MHz HMIO applicators. It is shown that better impedance matching is more important for intracavitary hyperthermia than for external hyperthermia. Choosing HMIO applicators in clinical practice is also discussed.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.