16
Views
0
CrossRef citations to date
0
Altmetric
Original Article

Absorbed Dose Resulting from a Specially Designed Computed Tomography Technique for Examination of the Urinary Bladder

, &
Pages 57-60 | Accepted 16 Sep 1988, Published online: 07 Jan 2010
 

Abstract

The absorbed spatial dose distribution resulting from a specially designed CT protocol for examination of the urinary bladder has been investigated with TLD rods in a body phantom containing tissue equivalent material. The CT examination consisted of scout view and both pre- and postcontrast scan series with 5 mm slice thickness and 5 mm unscanned intervals between successive scans. Cross-sectional dose distribution for one scan in the plane of the ovaries was measured as well as the dose profile for one scan along a line through the ovary parallel to the axis of rotation. Based on these measurements, the dose resulting from the whole CT examination was calculated, both with contiguous and noncontiguous scans. The ovarian dose was calculated for different positions of the ovaries in relation to the scanned area. The absorbed dose varied between 8.3 mGy and 9.7 mGy with the actual technique used. When contiguous scans with the same thickness were taken, the ovarian dose increased with a factor from 1.7 to 1.9. The dose resulting from the CT protocol of the urinary bladder was of the same magnitude as absorbed dose resulting from urography. When the diagnostic gain from a precise definition of tumor extent was taken into account, the dose resulting from the CT protocol was judged acceptable.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.