337
Views
0
CrossRef citations to date
0
Altmetric
Original Article

Total Effective Radiation Dose from Spiral CT and Conventional Radiography of the Pelvis with Regard to Fracture Classification

, &
Pages 651-654 | Accepted 23 Nov 1995, Published online: 07 Jan 2010
 

Abstract

Purpose: In most departments CT has replaced special radiographic projections with regard to classification of pelvic fractures. This change of procedure calls for analysis in terms of dosimetry.

Methods: The total effective radiation doses given with spiral CT and conventional 5 projection radiography were determined according to ICRP 60 by measuring organ doses with an anthropomorphic Rando Alderson phantom packed with thermoluminescence dosimeters. For comparison, easily obtainable calculated effective doses were also determined, based on the CT dose index (CTDI), measured free-in-air and as entrance surface dose using organ conversion factors according to NRPB-R250 and NRPB-R262.

Results: The total effective radiation dose was lower in spiral CT than in conventional 5 projection radiography, 4.4 and 5.0 mSv, respectively. In spiral CT the calculated effective dose was 11% lower and in conventional radiography 68% higher than the dose obtained by actual measurement using the Alderson phantom.

Conclusion: As CT gives important diagnostic information with regard to classification of pelvic fractures, and without a greater radiation risk than impacted by 5 projection conventional radiography, we recommend the performance of spiral CT instead of special projections.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.