2,755
Views
9
CrossRef citations to date
0
Altmetric
Technical Paper

Equivalent Leak Definitions for Smart LDAR (Leak Detection and Repair) When Using Optical Imaging Technology

, , , &
Pages 1050-1060 | Published online: 24 Feb 2012
 

Abstract

Controlling fugitive emissions from leaks in petrochemical industry process equipment now requires periodic monitoring of valves, flanges, pumps etc., typically on a quarterly basis. Previous studies have shown that over 90% of the reducible emissions come from approximately 0.1% of the components, i.e. the large leakers. A new, and more cost-effective approach for controlling these large leakers would entail more frequent monitoring of process equipment, allowing for the detection and repair of the highly leaking components that contribute the most to emissions. This approach has been called “Smart LDAR.” New optical imaging instruments, which significantly reduce monitoring costs, are now available to implement such an alternative work practice. This work describes the determination of the leak detection sensitivity (equivalency threshold) that an optical imaging instrument must achieve to ensure that it will provide at least the equivalent emission control of the current leak detection and repair practice. Equivalency thresholds were developed for various monitoring intervals. The U.S. Environment Protection Agency’s Monte Carlo simulation approach was used to perform the analysis and to demonstrate that optical imaging, which is capable of identifying al of the largest leakers, can provide better control of fugitive emissions

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.