13
Views
2
CrossRef citations to date
0
Altmetric
Original Articles

Mūrinių Konstrukcijų Garso Izoliavimas Papildomais Lanksčiais Sluoksniais

, &
Pages 33-40 | Received 01 Dec 2011, Accepted 01 Mar 2011, Published online: 16 May 2013
 

Santrauka

Siekiant sukaupti žinių, kaip užtikrinti naujų gyvenamųjų namų atitiktį privalomosios C garso klasės bei padidinto akustinio komforto A ir B garso klasių reikalavimams pagal STR 2.01.07:2003 reglamentą, teoriniais skaičiavimais bei eksperimentiniais tyrimais nustatytas butus skiriančių sienų ore sklindančio garso izoliavimo pagerėjimas įrengiant papildomą sienų dangą. Eksperimentiniai tyrimai buvo atliekami natūrinėmis sąlygomis matuojant silikatinių plytų ir keramzitbetonio blokelių mūro sienas. Darbe aprašyti teorinio skaičiavimo ir natūrinių matavimų modeliai vienparametriam oro garso izoliavimo rodikliui nustatyti. Parodyta, kaip natūrinių ore sklindančio garso izoliavimo matavimų rezultatai patalpose, kurių tūris didesnis nei 50 m3, gauti griežtai laikantis ISO 140 bei ISO 717 serijos standartų reikalavimų, priklauso nuo įvertinimo dažnių pločio. Remiantis šio darbo rezultatais nustatyta, kad svertinio oro garso izoliavimo pagerėjimas dažnių juostoje nuo 100 Hz iki 3150 Hz priklauso ne tik nuo dangos, bet ir nuo pagrindinės sienos charakteristikų. Žemųjų dažnių rezonansas, atsirandantis dėl papildomos sienos dangos, gali sumažinti svertinį garso izoliavimo rodiklį, nustatomą dažnių juostoje nuo 50 Hz iki 3150 Hz. Į tai būtina atsižvelgti projektuojant pastatų mūrinių konstrukcijų garso izoliavimo gerinimą papildomais lanksčiais sluoksniais ant tampriųjų ryšių.

Abstract

For the purposes of accumulating knowledge of how to comply with requirements for new buildings of obligatory sound class C or enhanced acoustic comfort sound classes A and B (Lithuanian Building Technical regulations STR 2.01.07:2003), the article discusses improvement on airborne sound insulation of partitions between dwellings using additional plasterboard layers. The results of an empirical approach were obtained performing in situ measurements of the partitions of masonry from silicate blocks and expanded-clay concrete blocks. Theoretical calculations without the evaluation of flanking paths are added. The paper looks at the peculiarities of in situ measurement methods and the estimation of the limiting uncertainty of the sound reduction index. It is showed that the values of the in situ measurements of the airborne sound reduction index in accordance with requirements EN ISO 140 and EN ISO 717 series for rooms having volume higher than 50 m3 varies depending on frequency range. It has been stated, that improvement on the weighed airborne sound reduction index in the frequency range from 100 Hz to 3150 Hz depends on the properties of additional layers and on the characteristics of the main constructions. Resonance in the low frequency range arising due to additional layers may reduce the weighed airborne sound reduction index defined in the frequency range from 50 Hz to 3150 Hz. This fact must be taken into account when designing improvement on masonry wall insulation using an additional layer in dwellings.

Additional information

Notes on contributors

Marius Mickaitis

Marius MICKAITIS. Dr, Assoc. Prof. and the Head of the Department of Building Structures, Vilnius Gediminas Technical University. Research interests: building acoustics, room acoustics, environmental noise.

Aleksandras Jagniatinskis

Aleksandras JAGNIATINSKIS. Dr and the Head of the Acoustic Laboratory of the Science Institute of Thermal Insulation, Vilnius Gediminas Technical University. Doctor of technical sciences (Building acoustics), Moscow Building Physics Institute, 1985. Publications: the author of more than 50 research papers. Research interests: building acoustics, environmental noise management and sound measurements.

Boris Fiks

Boris Fiks. Dr, a senior research fellow of the Acoustics Laboratory of the Science Institute of Thermal Insulation, Vilnius Gediminas Technical University. Doctor of technical sciences (Ultrasound), Kaunas University of Technology, 1985. Research interests: acoustic measurements and their precision.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.