![Sample our Environment & Agriculture journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5934/TOC-Subject-Sample-2021-Environment-Agriculture.jpg"})
Abstract
The successful operation of a seawater reverse osmosis desalination plant depends greatly on the performance of the pretreatment step. The start-up of a pretreatment filtration process usually begins with a dynamic part called ripening, during which the filter media increases its adsorption ability and improves the removal of foulants from the seawater. In that period (typically lasting 30–60 min, depending on the system's conditions) the effluent often does not meet the quality requirements of the RO membranes and must often be disposed of. An observation and analysis of the ripening phenomena was performed using lab scale acrylic filter columns containing granular activated carbon. The seawater originated from the Yellow Sea in Korea and an inline coagulation was performed prior to filtration using an optimal dose of FeCl3 based on a jar test. The turbidity, total suspended solids concentration and dissolved organic carbon were measured before and after filtration with the goal of assessing the filtration performance. The filter media, which was cleaned and dried before filtration showed distinct ripening characteristics. The measurements were then used for parameter identification of a typical filtration model. Based on the fitted model one can predict the optimal filter depth that would reduce the waste stream production of the plant.