Advanced search
Publication Cover
Canadian Metallurgical Quarterly
The Canadian Journal of Metallurgy and Materials Science
Volume 57, 2018 - Issue 4
Submit an article Journal homepage
583
Views
40
CrossRef citations to date
0
Altmetric
Materials Behaviour and Performance

Investigation of wear behaviour and microstructure of hot-pressed TiB2 particulate-reinforced magnesium matrix composites

Fatih AydinDepartment of Metallurgy and Materials Engineering, Karabuk University, Karabuk, TurkeyCorrespondence[email protected]
View further author information
&
Yavuz SunDepartment of Metallurgy and Materials Engineering, Karabuk University, Karabuk, TurkeyView further author information
Pages 455-469 | Received 11 Oct 2017, Accepted 15 May 2018, Published online: 28 May 2018

Citations (40)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (2)

Fatih Aydın. (2023) Tribological aspects of magnesium matrix composites: a review of recent experimental studies. Tribology - Materials, Surfaces & Interfaces 17:4, pages 363-396.
Read now
Mohammad Zarghami, Massoud Emamy, Mehdi Malekan & Amir Mansouri. (2023) Dry sliding wear behaviour of AZ91–Mg2Si–SiC hybrid composites at elevated temperatures. Materials Science and Technology 39:8, pages 1021-1029.
Read now

Articles from other publishers (38)

Bassiouny Saleh, Reham Fathi, Lu Zhang, Zhiwei Yu, Shenguang Liu & Liguo Zhao. (2024) Enhancing mechanical and wear performances of magnesium matrix composites using low-cost squid quill ash. Composites Part B: Engineering 277, pages 111383.
Crossref
Fatih Aydın. (2024) Recent Progress in Aluminium Matrix Composites: A Review on Tribological Performance. Transactions of the Indian Institute of Metals.
Crossref
Fatih Aydın. (2024) Recent advances in mechanical properties of Mg matrix composites: a review. Materials Science and Technology 40:5, pages 339-376.
Crossref
Olugbenga Ogunbiyi, Samuel A. Iwarere, Rotimi Sadiku & Michael O. Daramola. (2024) Microstructure, Mechanical, Tribological and Synergistic strengthening mechanisms of nickel/graphene nanoplatelets hybrid reinforced AZ91D magnesium-based matrix composites via spark plasma sintering. Journal of Materials Research and Technology 29, pages 2628-2640.
Crossref
Ch. Vasu, Atul B. Andhare & Ravikumar Dumpala. (2024) Machinability and tool wear studies on AZ91/B4C metal matrix composites using uncoated and CVD diamond coated WC-Co turning inserts. International Journal of Refractory Metals and Hard Materials 119, pages 106538.
Crossref
Praveenkumar Babu & Darius Gnanaraj Solomon. (2023) Mechanical and tribological properties of magnesium composites– A review. Materials Today: Proceedings.
Crossref
Dinesh Kumar & Lalit Thakur. (2023) Wear Performance of TiB2-Reinforced AZ91 Magnesium Metal Matrix Composite Fabricated by Ultrasonic Stir-Casting Process. JOM 75:7, pages 2731-2744.
Crossref
Samuel Kefyalew Abebe, Devendra Kumar Sinha, Habtamu Beri Tufa & Getinet Asrat Mengesha. (2023) Physical and mechanical behavior of aluminum-magnesium alloy matrix hybrid composite fabricated through friction stir consolidation process. Advances in Mechanical Engineering 15:6, pages 168781322311800.
Crossref
Abdul Malik & Yangwei Wang. (2023) A short review on high strain rate superplasticity in magnesium-based composites materials. International Journal of Lightweight Materials and Manufacture 6:2, pages 214-224.
Crossref
Mustafa Mustu, Bilge Demir, Fatih Aydin & Hakan Gürün. (2023) An investigation of the PMEDM processing and surface characterizations of AZ61 matrix composites via experimental and optimization methods. Materials Chemistry and Physics 300, pages 127526.
Crossref
Mustafa Mustu, Bilge Demir & Fatih Aydin. (2022) An Investigation of Mechanical and Wear Performance of TiB2/GNPs-Reinforced ZK60 Mg Matrix Composites Fabricated Via Powder Metallurgy. Journal of Materials Engineering and Performance 32:8, pages 3527-3541.
Crossref
Dinesh Kumar & Lalit Thakur. (2022) A Study of Development and Sliding Wear Behavior of AZ91D/Al2O3 Composites Fabricated by Ultrasonic-Assisted Stir Casting. Arabian Journal for Science and Engineering 48:3, pages 2951-2967.
Crossref
V.K. Parikh, Vivek Patel, D.P. Pandya & Joel Andersson. (2023) Current status on manufacturing routes to produce metal matrix composites: State-of-the-art. Heliyon 9:2, pages e13558.
Crossref
Fatih Aydin, Rafet Durgut, Mustafa Mustu & Bilge Demir. (2023) Prediction of wear performance of ZK60 / CeO2 composites using machine learning models. Tribology International 177, pages 107945.
Crossref
Juwon Fayomi, Abimbola Patricia Popoola, Olawale Popoola, Victor Aigbodon & Oluranti Agboola. (2022) The spark plasma sintering of the optimized parametric process for the magnesium alloy reinforced hybrid nano-ceramics. The International Journal of Advanced Manufacturing Technology 124:5-6, pages 1875-1889.
Crossref
Suhail Ahmed Manroo, Noor Zaman Khan & Babar Ahmad. (2022) Mechanical, Wear, and Corrosion Properties Investigation of ZE41/TiB2 Surface Composites Fabricated by Friction Stir Processing. Journal of Manufacturing Science and Engineering 144:11.
Crossref
KT Sunu Surendran & A Gnanavelbabu. (2022) Tribological performance of AZ91D/HfC p magnesium composite prepared through stir-ultrasonic-squeeze casting technique . Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892211327.
Crossref
Santhi M. George, Amel Gacem, A. Kistan, R. Mohammed Ashick, L. Malleswara Rao, Vinod Singh Rajput, N. Nagabooshanam, Moamen S. Refat, Amnah Mohammed Alsuhaibani & David Christopher. (2022) Investigation of High-Temperature Wear Behaviour of AA 2618-Nano Si3N4 Composites Using Statistical Techniques. Journal of Nanomaterials 2022, pages 1-12.
Crossref
KT Sunu Surendran & A Gnanavelbabu. (2021) Tribological behaviour of AZ91D/ultra-high-temperature ceramic composites at room and elevated temperatures. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236:9, pages 1855-1870.
Crossref
M. A. Hussein, M. A. Azeem, A. Madhan Kumar, M. Ali & A. Alghanim. (2022) Processing, Characterization, and In Vitro Corrosion Behavior of Mg-TiB2 Composite for Orthopedic Applications. JOM 74:3, pages 981-989.
Crossref
Süleyman Demirdal & Fatih Aydın. (2022) The influence of low-cost eggshell on the wear and electrochemical corrosion behaviour of novel pure Mg matrix composites. Materials Chemistry and Physics 277, pages 125520.
Crossref
S. Kartheesan, B. Shahul Hamid Khan, M. Kamaraj, Sravya Tekumalla & Manoj Gupta. (2022) Dry Sliding Wear Behavior of Magnesium Nanocomposites Using Response Surface Methodology. Journal of Tribology 144:1.
Crossref
Ege Anıl DİLER. (2021) Electrical, Thermal, and Mechanical Properties of Mg-TiB2 Nanocomposites Produced by Spark Plasma SinteringKıvılcım Plazma Sinterleme Yöntemiyle Üretilen Mg-TiB2 Nanokompozitlerin Elektriksel, Isıl ve Mekanik Özellikleri. International Journal of Advances in Engineering and Pure Sciences 33:4, pages 526-536.
Crossref
Yavuz Sun, Engin Cevik, Yunus Turen, Hayrettin Ahlatci, Muhammet Emre Turan, Fatih Aydin & Huseyin Zengin. (2021) Influence of GNPs and B4C reinforcements on mechanical, thermal and wear properties of magnesium matrix composite produced by powder metallurgy. Journal of Composite Materials 55:26, pages 3881-3891.
Crossref
Fatih Aydın. (2021) Investigation of Elevated Temperature Wear Behavior of Al 2024-BN Composites using Statistical Techniques. Journal of Materials Engineering and Performance 30:11, pages 8560-8578.
Crossref
Galal Elmensouri, İsmail Hakki Kara, Hayrettin Ahlatci & Yunus Türen. (2021) Wear Resistance of Sheet Magnesium Alloy AZ31 with Micro Arc Oxidation Coatings After Shot Peening. Metal Science and Heat Treatment 63:7-8, pages 426-429.
Crossref
Hassan Jafari, Alireza Mazloumian & Mohammad Meghdad Fallah. (2021) Wear properties of stir cast and hot extruded Mg-6Zn-1Ca/Al2O3p composites. Applied Physics A 127:8.
Crossref
Mohammad Shahin, Khurram Munir, Cuie Wen & Yuncang Li. (2021) Nano-tribological behavior of graphene nanoplatelet–reinforced magnesium matrix nanocomposites. Journal of Magnesium and Alloys 9:3, pages 895-909.
Crossref
Mehmet Akif Erden & Fatih Aydın. (2021) Wear and mechanical properties of carburized AISI 8620 steel produced by powder metallurgy. International Journal of Minerals, Metallurgy and Materials 28:3, pages 430-439.
Crossref
Fatih Aydin. (2021) The investigation of the effect of particle size on wear performance of AA7075/Al2O3 composites using statistical analysis and different machine learning methods. Advanced Powder Technology 32:2, pages 445-463.
Crossref
Haiping Zhou, Chengcai Zhang, Baokun Han, Jianfeng Qiu, Shengxue Qin, Kuidong Gao, Jie Liu, Shuai Sun & Hongbin Zhang. (2020) Microstructures and Mechanical Properties of Nanocrystalline AZ31 Magnesium Alloy Powders with Submicron TiB2 Additions Prepared by Mechanical Milling. Crystals 10:6, pages 550.
Crossref
Fatih AYDIN & Mehmet Akif ERDEN. (2020) The Investigation of Electrochemical Corrosion Behaviour of Fe Matrix Composites at Room and Elevated TemperaturesFe Matrisli Kompozitlerin Oda ve Yüksek Sıcaklıklardaki Elektrokimyasal Korozyon Davranışının İncelenmesi. Düzce Üniversitesi Bilim ve Teknoloji Dergisi 8:1, pages 418-427.
Crossref
Fatih AYDIN. (2020) TOZ METALURJİSİ İLE ÜRETİLMİŞ Al / Y2O3 NANOKOMPOZİTLERİNİN ODA VE YÜKSEK SICAKLIKTAKİ KOROZYON DAVRANIŞININ İNCELENMESİ. Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi.
Crossref
Fatih Aydin, Yavuz Sun & M Emre Turan. (2019) Influence of TiC content on mechanical, wear and corrosion properties of hot-pressed AZ91/TiC composites. Journal of Composite Materials 54:2, pages 141-152.
Crossref
Fatih Aydin & M. Emre Turan. (2020) The Effect of Boron Nitride on Tribological Behavior of Mg Matrix Composite at Room and Elevated Temperatures. Journal of Tribology 142:1.
Crossref
Safa Polat, Yavuz Sun, Engin Çevik, Hendrik Colijn & M Emre Turan. (2019) Investigation of wear and corrosion behavior of graphene nanoplatelet-coated B 4 C reinforced Al–Si matrix semi-ceramic hybrid composites . Journal of Composite Materials 53:25, pages 3549-3565.
Crossref
Huseyin Zengin, Yunus Turen & Levent Elen. (2019) A Comparative Study on Microstructure, Mechanical and Tribological Properties of A4, AE41, AS41 and AJ41 Magnesium Alloys. Journal of Materials Engineering and Performance 28:8, pages 4647-4657.
Crossref
Erkan Koç & Muhammet Emre Turan. (2019) Effect of Zn content and heat treatment on tribological behavior of biodegradable Mg-xZn alloys in simulated body fluid. Materials Research Express 6:8, pages 0865b5.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.