Citations (90)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (29)
Dohyung Kee. (2021) Development and evaluation of the novel postural loading on the entire body assessment. Ergonomics 64:12, pages 1555-1568.
Read now
Read now
Dohyung Kee. (2020) An empirical comparison of OWAS, RULA and REBA based on self-reported discomfort. International Journal of Occupational Safety and Ergonomics 26:2, pages 285-295.
Read now
Read now
Mohammad Abdoli-Eramaki, Caroline Damecour & Ahmad Ghasempoor. (2015) Biomechanics of leaning forward against a support with an extreme standing reach. Ergonomics 58:2, pages 208-219.
Read now
Read now
Matt J. Camilleri, Ajith Malige, Jeffrey Fujimoto & David M. Rempel. (2013) Touch displays: the effects of palm rejection technology on productivity, comfort, biomechanics and positioning. Ergonomics 56:12, pages 1850-1862.
Read now
Read now
Woojin Park, DevenderP. Singh, MartinS. Levy & EuiS. Jung. (2009) Obesity effect on perceived postural stress during static posture maintenance tasks. Ergonomics 52:9, pages 1169-1182.
Read now
Read now
Abid
Ali Khan, Leonard O'Sullivan & TimothyJ. Gallwey. (2009) Effects of combined wrist deviation and forearm rotation on discomfort score. Ergonomics 52:3, pages 345-361.
Read now
Read now
S. Bao, N. Howard, P. Spielholz & B. Silverstein. (2007) Two posture analysis approaches and their application in a modified Rapid Upper Limb Assessment evaluation. Ergonomics 50:12, pages 2118-2136.
Read now
Read now
Eilís Carey & Timothy Gallwey. (2005) Wrist discomfort levels for combined movements at constant force and repetition rate. Ergonomics 48:2, pages 171-186.
Read now
Read now
Andrew Briggs, Leon Straker & Alison Greig. (2004) Upper quadrant postural changes of school children in response to interaction with different information technologies. Ergonomics 47:7, pages 790-819.
Read now
Read now
Dohyung Kee & Waldemar Karwowski. (2004) Joint angles of isocomfort for female subjects based on the psychophysical scaling of static standing postures. Ergonomics 47:4, pages 427-445.
Read now
Read now
Alireza Choobineh, Mohammadali Lahmi, Houshang Shahnavaz, Reza Khani Jazani & Mostafa Hosseini. (2004) Musculoskeletal Symptoms as Related to Ergonomic Factors in Iranian Hand-Woven Carpet Industry and General Guidelines for Workstation Design. International Journal of Occupational Safety and Ergonomics 10:2, pages 157-168.
Read now
Read now
Svend Erik Mathiassen, Therése Möller & Mikael Forsman. (2003) Variability in mechanical exposure within and between individuals performing a highly constrained industrial work task. Ergonomics 46:8, pages 800-824.
Read now
Read now
K. R. Lehman, J. P. Psihogios & R. G. J. Meulenbroek. (2001) Effects of sitting versus standing and scanner type on cashiers. Ergonomics 44:7, pages 719-738.
Read now
Read now
Dohyung Kee & Waldemar Karwowski. (2001) The boundaries for joint angles of isocomfort for sitting and standing males based on perceived comfort of static joint postures. Ergonomics 44:6, pages 614-648.
Read now
Read now
Arne Aarås, Gunnar Horgen & Ola Ro. (2000) Work With the Visual Display Unit: Health Consequences. International Journal of Human–Computer Interaction 12:1, pages 107-134.
Read now
Read now
T. K. Amell, S. Kumar, Y. Narayan & H. C. Gil Coury. (2000) Effect of trunk rotation and arm position on gross upper extremity adduction strength and muscular activity. Ergonomics 43:4, pages 512-527.
Read now
Read now
ARNE AARAS, KNUT INGE FOSTERVOLD, OLA RO, MAGNE THORESEN & STIG LARSEN. (1997) Postural load during VDU work: a comparison between various work postures. Ergonomics 40:11, pages 1255-1268.
Read now
Read now
YILI LIU, XUDONG ZHANG & DON CHAFFIN. (1997) Perception and visualization of human posture information for computer-aided ergonomic analysis. Ergonomics 40:8, pages 818-833.
Read now
Read now
MEI LI LIN, ROBERT G. RADWIN & STOVER H. SNOOK. (1997) A single metric for quantifying biomechanical stress in repetitive motions and exertions. Ergonomics 40:5, pages 543-558.
Read now
Read now
KATHARYNA. GRANT & DANIELJ. HABES. (1995) An analysis of scanning postures among grocery cashiers and its relationship to checkstand design. Ergonomics 38:10, pages 2078-2090.
Read now
Read now
A. GENAIDY, H. BARKAWI & D. CHRISTENSEN. (1995) Ranking of static non-neutral postures around the joints of the upper extremity and the spine. Ergonomics 38:9, pages 1851-1858.
Read now
Read now
ARNE AAR[Adot]S. (1994) The impact of ergonomic intervention on individual health and corporate prosperity in a telecommunications environment. Ergonomics 37:10, pages 1679-1696.
Read now
Read now
Holger Ursin, IngerM. Endersen, Sven Svebak, Gunnar Tellnes & Reidar Mykletun. (1993) Muscle pain and coping with working life in Norway: A review. Work & Stress 7:3, pages 247-258.
Read now
Read now
ASHRAFM. GENAIDY & WALDEMAR KARWOWSKI. (1993) The effects of neutral posture deviations on perceived joint discomfort ratings in sitting and standing postures. Ergonomics 36:7, pages 785-792.
Read now
Read now
A.M. GENAIDY, R. J. SIMMONS, L. GUO & J. A. HIDALGO. (1993) Can visual perception be used to estimate body part angles?. Ergonomics 36:4, pages 323-329.
Read now
Read now
BENOIT GRIOUX & MARIO LAMONTAGNE. (1992) Net shoulder joint moment and muscular activity during light weight–handling at different displacements and frequencies. Ergonomics 35:4, pages 385-403.
Read now
Read now
SVEND
ERIK MATHIASSEN & JORGEN WINKEL. (1991) Quantifying variation in physical load using exposure-vs-time data. Ergonomics 34:12, pages 1455-1468.
Read now
Read now
ULF JÄRVHOLM, GUNNAR PALMERUD, ROLAND KADEFORSF & PETER HERBERTS. (1991) The effect of arm support on supraspinal muscle load during simulated assembly work and welding. Ergonomics 34:1, pages 57-66.
Read now
Read now
ARNE AARÅs & EINAR STRANDEN. (1988) Measurement of postural angles during work. Ergonomics 31:6, pages 935-944.
Read now
Read now
Articles from other publishers (61)
Vikram Sakinala, P. S. Paul & Shyamal Chandrakar. (2022) Assessment of Work Postures and Physical Workload of Machine Operators in Underground Coal Mines. Journal of The Institution of Engineers (India): Series D 104:1, pages 87-98.
Crossref
Crossref
Hemani Malhotra & Manjit K. Chauhan. 2022. Technology Enabled Ergonomic Design. Technology Enabled Ergonomic Design
483
490
.
Ali Nawaz, Md. Dilshad Alam, Imtiaz Ali Khan, Qasim Murtaza, Taliv Hussain & Hasan Faraz. 2022. Ergonomics for Improved Productivity. Ergonomics for Improved Productivity
325
333
.
Daniel P. Armstrong, Aleksandra R. Budarick, Claragh E. E. Pegg, Ryan B. Graham & Steven L. Fischer. (2020) Feature Detection and Biomechanical Analysis to Objectively Identify High Exposure Movement Strategies When Performing the EPIC Lift Capacity test. Journal of Occupational Rehabilitation 31:1, pages 50-62.
Crossref
Crossref
Jerzy Grobelny & Rafał Michalski. (2020) Preventing Work-Related Musculoskeletal Disorders in Manufacturing by Digital Human Modeling. International Journal of Environmental Research and Public Health 17:22, pages 8676.
Crossref
Crossref
Amira Mohamed Eladly, Mohamed Gaber Abou-Ali, Aida Mohamed Sheta & Sherwet Hussein EL-Ghlomy. (2020) A flexible ergonomic redesign of the sewing machine workstation. Research Journal of Textile and Apparel 24:3, pages 245-265.
Crossref
Crossref
Yongbao Zhang, Xiang Wu, Jingqi Gao, Jianwu Chen & Xun Xv. (2019) Simulation and Ergonomic Evaluation of Welders’ Standing Posture Using Jack Software. International Journal of Environmental Research and Public Health 16:22, pages 4354.
Crossref
Crossref
Angelica E. Lang, Jacquelyn M. Maciukiewicz, Meghan E. Vidt, Sylvain G. Grenier & Clark R. Dickerson. (2018) Workstation configuration and container type influence upper limb posture in grocery bagging. Applied Ergonomics 73, pages 206-213.
Crossref
Crossref
Velittin Kalınkara. (2018) EL DOKUMASI HALI ÜRETİMİNİN ERGONOMİK DEĞERLENDİRMESİ: ÇALIŞAN SAĞLIĞININ KORUNMASI. Ergonomi 1:1, pages 1-13.
Crossref
Crossref
N. Kargar, A.R. Choobineh, M. Razeghi, S. Keshavarzi & N. Meftahi. (2018) Posture and discomfort assessment in computer users while using touch screen device as compared with mouse-keyboard and touch pad-keyboard. Work 59:3, pages 341-349.
Crossref
Crossref
Beiyuan Guo, Linzhi Tian & Weining Fang. (2017) Effects of operation type and handle shape of the driver controllers of high-speed train on the drivers' comfort. International Journal of Industrial Ergonomics 58, pages 1-11.
Crossref
Crossref
Amjad Hussain, Keith Case, Russell Marshall & Steve Summerskill. (2016) Using Ergonomic Risk Assessment Methods for Designing Inclusive Work Practices: A Case Study. Human Factors and Ergonomics in Manufacturing & Service Industries 26:3, pages 337-355.
Crossref
Crossref
L. Peppoloni, A. Filippeschi, E. Ruffaldi & C.A. Avizzano. (2016) A novel wearable system for the online assessment of risk for biomechanical load in repetitive efforts. International Journal of Industrial Ergonomics 52, pages 1-11.
Crossref
Crossref
Lorenzo Peppoloni, Alessandro Filippeschi & Emanuele Ruffaldi. (2014) Assessment of task ergonomics with an upper limb wearable device. Assessment of task ergonomics with an upper limb wearable device.
Nabilla Sofia Mohd Kamil & Siti Zawiah Md Dawal. (2013) Investigation of Sitting Postural Angle and Muscle Activity on Ageing Women Workforce during Computer Task. Advanced Engineering Forum 10, pages 57-62.
Crossref
Crossref
Svend Erik Mathiassen, Jens Wahlström & Mikael Forsman. (2012) Bias and imprecision in posture percentile variables estimated from short exposure samples. BMC Medical Research Methodology 12:1.
Crossref
Crossref
Dohyung Kee & Inseok Lee. (2012) Relationships between subjective and objective measures in assessing postural stresses. Applied Ergonomics 43:2, pages 277-282.
Crossref
Crossref
Yong-Ku Kong, Jun-Goo Han & Dae-Min Kim. (2010) Development of an Ergonomic Checklist for the Investigation of Work-related Lower Limb Disorders in Farming - ALLA: Agricultural Lower-Limb Assessment. Journal of the Ergonomics Society of Korea 29:6, pages 933-942.
Crossref
Crossref
Letícia Carnaz, Mariana V. Batistao & Helenice J. C. Gil Coury. (2010) A Review of Direct Neck Measurement in Occupational Settings. Sensors 10:12, pages 10967-10985.
Crossref
Crossref
Myung-Chul Jung, DongHyun Park, Soo-Jin Lee, Kyung-Suk Lee, Dae-Min Kim & Yong-Ku Kong. (2010) The effects of knee angles on subjective discomfort ratings, heart rates, and muscle fatigue of lower extremities in static-sustaining tasks. Applied Ergonomics 42:1, pages 184-192.
Crossref
Crossref
Imtiaz A. Khan & Mohd. Asghar. (2010) Ergonomic evaluation of the angle of abduction in a computer numerically controlled electro discharge machine environment. Cognition, Technology & Work 12:4, pages 263-269.
Crossref
Crossref
Abid Ali Khan, Leonard O’Sullivan & Timothy J. Gallwey. (2010) Effect on discomfort of frequency of wrist exertions combined with wrist articulations and forearm rotation. International Journal of Industrial Ergonomics 40:5, pages 492-503.
Crossref
Crossref
Imtiaz A & Mohammad Asghar. 2010. Advances in Human Factors, Ergonomics, and Safety in Manufacturing and Service Industries. Advances in Human Factors, Ergonomics, and Safety in Manufacturing and Service Industries
169
179
.
. (2009) Evaluation of the Effects of Lower-limb Postures on the Subjective Discomfort, Heart Rate and EMGs of Lower Extremity Muscles. Journal of the Ergonomics Society of Korea 28:1, pages 9-19.
Crossref
Crossref
Maria C. Santos & Selma Lancman. (2008) Avaliação da função do ombro em técnicos de trânsito pelo protocolo de Constant-Murley. Fisioterapia e Pesquisa 15:3, pages 259-265.
Crossref
Crossref
Yao‐Wen Hsu, Yi‐Chan Chung, Chung‐Ching Chiu, Ching‐Piao Chen & Chih‐Hung Tsai. (2008) A Study of the Ergonomics Evaluation of a Water Heater’s Case Manufacturing Factory. Asian Journal on Quality 9:1, pages 22-40.
Crossref
Crossref
James F. KnightChris Baber. (2016) Effect of Head-Mounted Displays on Posture. Human Factors: The Journal of the Human Factors and Ergonomics Society 49:5, pages 797-807.
Crossref
Crossref
James F. Knight & Chris Baber. (2007) Assessing the physical loading of wearable computers. Applied Ergonomics 38:2, pages 237-247.
Crossref
Crossref
Arne Aarås, G. Horgen & M. Helland. 2007. Ergonomics and Health Aspects of Work with Computers. Ergonomics and Health Aspects of Work with Computers
3
9
.
Shouqian Sun, Qun Wu, Chunlei Chai & Yunfei Xiong. (2006) A driving posture prediction method based on driver comfort. A driving posture prediction method based on driver comfort.
Arun Garg, Kurt Hegmann & Jay Kapellusch. (2006) Short-cycle overhead work and shoulder girdle muscle fatigue. International Journal of Industrial Ergonomics 36:6, pages 581-597.
Crossref
Crossref
G.-Å. Hansson, I. Arvidsson, K. Ohlsson, C. Nordander, S.E. Mathiassen, S. Skerfving & I. Balogh. (2006) Precision of measurements of physical workload during standardised manual handling. Part II: Inclinometry of head, upper back, neck and upper arms. Journal of Electromyography and Kinesiology 16:2, pages 125-136.
Crossref
Crossref
Dohyung Kee. (2005) Gender differences in rankings of joint motion stressfulness based on psychophysical scaling. International Journal of Industrial Ergonomics 35:5, pages 461-469.
Crossref
Crossref
Karolina Kazmierczak, Svend Erik Mathiassen, Mikael Forsman & Jørgen Winkel. (2005) An integrated analysis of ergonomics and time consumption in Swedish ‘craft-type’ car disassembly. Applied Ergonomics 36:3, pages 263-273.
Crossref
Crossref
. (2004) The Study on the Improvement of the Letter Sorting Station to Prevent WMSDs. Journal of the Ergonomics Society of Korea 23:4, pages 35-43.
Crossref
Crossref
Alireza Choobineh, Mostafa Hosseini, Mohammadali Lahmi, Saeed Sharifian & Arash Hashemi Hosseini. (2004) Weaving posture analyzing system (WEPAS): introduction and validation. International Journal of Industrial Ergonomics 34:2, pages 139-147.
Crossref
Crossref
Grady T. Holman, Brian J. Carnahan & Robert L. Bulfin. (2016) Using Linear Programming to Optimize Control Panel Design from an Ergonomics Perspective. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 47:10, pages 1317-1321.
Crossref
Crossref
Min K Chung, Inseok Lee & Dohyung Kee. (2003) Assessment of postural load for lower limb postures based on perceived discomfort. International Journal of Industrial Ergonomics 31:1, pages 17-32.
Crossref
Crossref
Giuseppe Andreoni, Giorgio C Santambrogio, Marco Rabuffetti & Antonio Pedotti. (2002) Method for the analysis of posture and interface pressure of car drivers. Applied Ergonomics 33:6, pages 511-522.
Crossref
Crossref
GUNNAR HORGEN, ARNE AARÅS, HELENE KAISER & MAGNE THORESEN. (2002) Do Specially Designed Visual Display Unit Lenses Create Increased Postural Load Compared with Single-Vision Lenses during Visual Display Unit Work?. Optometry and Vision Science 79:2, pages 112-120.
Crossref
Crossref
Svend Erik Mathiassen & Elizabeth Åhsberg. (1999) Prediction of shoulder flexion endurance from personal factors. International Journal of Industrial Ergonomics 24:3, pages 315-329.
Crossref
Crossref
Helenice Jane Cote Gil Coury, Shrawan Kumar, Solange Rodgher & Yogesh Narayan. (1998) Measurements of shoulder adduction strength in different postures. International Journal of Industrial Ergonomics 22:3, pages 195-206.
Crossref
Crossref
Neusa Maria Costa Alexandre. (1998) Ergonomia e as atividades ocupacionais da equipe de enfermagem. Revista da Escola de Enfermagem da USP 32:1, pages 84-90.
Crossref
Crossref
R.H. Westgaard & J. Winkel. (1997) Ergonomic intervention research for improved musculoskeletal health: A critical review. International Journal of Industrial Ergonomics 20:6, pages 463-500.
Crossref
Crossref
Shihan Bao, Jørgen Winkel, Svend Erik Mathiassen & Houshang Shahnavaz. (1997) Interactive effect of ergonomics and production engineering on shoulder-neck exposure — A case study of assembly work in China and Sweden. International Journal of Industrial Ergonomics 20:1, pages 75-85.
Crossref
Crossref
O VasseljenJrJr & RH Westgaard. (1997) Arm and trunk posture during work in relation to shoulder and neck pain and trapezius activity. Clinical Biomechanics 12:1, pages 22-31.
Crossref
Crossref
Krzysztof Swat & Grzegorz Krzychowicz. (1996) ERGONOM: Computer-aided working posture analysis system for workplace designers. International Journal of Industrial Ergonomics 18:1, pages 15-26.
Crossref
Crossref
Ryszard Paluch. (1996) Are body dimensions affecting working body posture?. International Journal of Industrial Ergonomics 17:1, pages 1-9.
Crossref
Crossref
S.E. Mathiassen, J. Winkel & G.M. Hägg. (1995) Normalization of surface EMG amplitude from the upper trapezius muscle in ergonomic studies — A review. Journal of Electromyography and Kinesiology 5:4, pages 197-226.
Crossref
Crossref
Gunnar Horgen, Arne Aarås, Hans Fagerthun & Stig Larsen. (1995) Is there a reduction in postural load when wearing progressive lenses during VDT work over a three-month period?. Applied Ergonomics 26:3, pages 165-171.
Crossref
Crossref
D.F. Lovely, T.W. Hruczkowski, B. Hudgins, K. Rush, J.R. Sexsmith, J. Rickards & E.N. Biden. (1995) Intelligent ambulatory monitor for the collection of biomechanical data from within the workplace. Journal of Microcomputer Applications 18:2, pages 127-147.
Crossref
Crossref
C. Carrasco, N. Coleman, S. Healey & M. Lusted. (1995) Packing products for customers. Applied Ergonomics 26:2, pages 101-108.
Crossref
Crossref
Guangyan Li, Christine M. Haslegrave & E.Nigel Corlett. (1995) Factors affecting posture for machine sewing tasks. Applied Ergonomics 26:1, pages 35-46.
Crossref
Crossref
Neusa Maria da Costa Alexandre, Sylvia Helena F. da Cunha Henriques & Marco Antonio Alves de Moraes. (1994) CONSIDERAÇÕES SOBRE UMA AVALIAÇÃO CLÍNICA ESPECÍFICA DA COLUNA VERTEBRAL EM TRABALHADORES DE ENFERMAGEM. Revista da Escola de Enfermagem da USP 28:3, pages 293-308.
Crossref
Crossref
A.M. Genaidy, A.A. Al-Shedi & W. Karwowski. (1994) Postural stress analysis in industry. Applied Ergonomics 25:2, pages 77-87.
Crossref
Crossref
Markku Mattila, Waldemar Karwowski & Mika Vilkki. (1993) Analysis of working postures in hammering tasks on building construction sites using the computerized OWAS method. Applied Ergonomics 24:6, pages 405-412.
Crossref
Crossref
. 1993. Contemporary Ergonomics. Contemporary Ergonomics
368
373
.
W.M. Keyserling, M. Brouwer & B.A. Silverstein. (1992) A checklist for evaluating ergonomic risk factors resulting from awkward postures of the legs, trunk and neck. International Journal of Industrial Ergonomics 9:4, pages 283-301.
Crossref
Crossref
A. Freudenthal, M.P.J.M. van Riel, J.F.M. Molenbroek & C.J. Snijders. (1991) The effect on sitting posture of a desk with a ten-degree inclination using an adjustable chair and table. Applied Ergonomics 22:5, pages 329-336.
Crossref
Crossref
Ulf Järvholm, Gunnar Palmerud, Dan Karlsson, Peter Herberts & Roland Kadefors. (2005) Intramuscular pressure and electromyography in four shoulder muscles. Journal of Orthopaedic Research 9:4, pages 609-619.
Crossref
Crossref
P. Kivi & M. Mattila. (1991) Analysis and improvement of work postures in the building industry: application of the computerised OWAS method. Applied Ergonomics 22:1, pages 43-48.
Crossref
Crossref