Citations (45)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (8)
Zeinab Kazemi, Navid Arjmand, Adel Mazloumi, Zanyar Karimi, Ahmadreza Keihani & Mohammad Sadegh Ghasemi. (2023) Effect of muscular fatigue on the cumulative lumbar damage during repetitive lifting task: a comparative study of damage calculation methods. Ergonomics 0:0, pages 1-16.
Read now
Read now
Mehdi Nematimoez & James S. Thomas. (2022) The effect of head movement restriction on the kinematics of the spine during lifting and lowering tasks. Ergonomics 65:6, pages 842-856.
Read now
Read now
Chrystal Joseph, Ayana U. C. Walters, Wendy L. Lawrence & Nigel Kevin Jalsa. (2020) An ergonomic evaluation of pannists. International Journal of Occupational Safety and Ergonomics 26:1, pages 129-139.
Read now
Read now
Samuel J. Howarth, Tyson A.C. Beach & Jack P. Callaghan. (2010) Dynamic factors and force-weighting corrections influence estimates of cumulative vertebral joint compression. Theoretical Issues in Ergonomics Science 11:5, pages 474-488.
Read now
Read now
JaapH. van Dieën, GertS. Faber, RomyC.C. Loos, P. PaulF.M. Kuijer, Idsart Kingma, HenkF. van der Molen & MoniqueH.W. Frings-Dresen. (2010) Validity of estimates of spinal compression forces obtained from worksite measurements. Ergonomics 53:6, pages 792-800.
Read now
Read now
MarcoJ.M. Hoozemans, Idsart Kingma, WiebeH.K. de Vries & JaapH. van Dieën. (2008) Effect of lifting height and load mass on low back loading. Ergonomics 51:7, pages 1053-1063.
Read now
Read now
Richard Sesek, David Gilkey, Phillip Drinkaus, Donald S. Bloswick & Robin Herron. (2003) Evaluation and Quantification of Manual Materials Handling Risk Factors. International Journal of Occupational Safety and Ergonomics 9:3, pages 271-287.
Read now
Read now
Seca Gandaseca, Tetsuhiko Yoshimura, Toshiaki Yamamoto & Slamet Mulyono. (1998) A Biomechanical Analysis of Industrial Forest Plantation Workers in East Kalimantan. Journal of Forest Research 3:2, pages 75-78.
Read now
Read now
Articles from other publishers (37)
Justus Brosche, Hannes Wackerle, Peter Augat & Hermann Lödding. (2024) Individualized workplace ergonomics using motion capture. Applied Ergonomics 114, pages 104140.
Crossref
Crossref
Xiaohan Xiang, Masahiro Tanaka, Satoru Umeno, Yutaka Kikuchi & Yoshihiko Kobayashi. (2023) Dynamic assessment for low back-support exoskeletons during manual handling tasks. Frontiers in Bioengineering and Biotechnology 11.
Crossref
Crossref
Maxwell C Cardwell, Jill M Martin, Carolyn Meinerz, Chad J Beck, Mei Wang & Gregory J Schmeling. (2023) A cadaveric biomechanical evaluation of anterior posterior compression II injuries. Injury 54:3, pages 834-840.
Crossref
Crossref
Xiaohan Xiang, Yoji Yamada, Hibiki Nakamura & Yasuhiro Akiyama. (2022) Effect of Dynamic Parameters on Lumbar Compressive Force during Patient Transfer Task. Effect of Dynamic Parameters on Lumbar Compressive Force during Patient Transfer Task.
Xiaohan Xiang, Yoji Yamada, Yasuhiro Akiyama, Hibiki Nakamura & Naoki Kudo. (2021) Effect of Parameters on Lumbar Compressive Force during Patient Transfer. Applied Sciences 11:24, pages 11622.
Crossref
Crossref
Mohammadreza Bahramian, Mohammad Amin Shayestehpour, Mohammad Yavari, Hossein Mehrabi & Navid Arjmand. (2021) Musculoskeletal injury risk assessment in a car dashboard assembly line using various quantitative and qualitative tools. Musculoskeletal injury risk assessment in a car dashboard assembly line using various quantitative and qualitative tools.
Mahdi Ebrahimkhani, Navid Arjmand & Aboulfazl Shirazi-Adl. (2021) Biomechanical effects of lumbar fusion surgery on adjacent segments using musculoskeletal models of the intact, degenerated and fused spine. Scientific Reports 11:1.
Crossref
Crossref
Xiaohan Xiang, Yoji Yamada, Yasuhiro Akiyama, Ziliang Tao & Naoki Kudo. (2021) Validation of Lumbar Compressive Force Simulation in Forward Flexion Condition. Applied Sciences 11:2, pages 726.
Crossref
Crossref
Jack Y. Wang, Chris M. Loma, Mitch K. Carswell & Allison Stephens. 2021. Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021). Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021)
102
108
.
Yongbao Zhang, Jinjing Ke, Xiang Wu & Xiaowei Luo. (2020) A Biomechanical Waist Comfort Model for Manual Material Lifting. International Journal of Environmental Research and Public Health 17:16, pages 5948.
Crossref
Crossref
F. Ghezelbash, A. Shirazi-Adl, Z. El Ouaaid, A. Plamondon & N. Arjmand. (2020) Subject-specific regression equations to estimate lower spinal loads during symmetric and asymmetric static lifting. Journal of Biomechanics 102, pages 109550.
Crossref
Crossref
F. Aghazadeh, N. Arjmand & A.M. Nasrabadi. (2020) Coupled artificial neural networks to estimate 3D whole-body posture, lumbosacral moments, and spinal loads during load-handling activities. Journal of Biomechanics 102, pages 109332.
Crossref
Crossref
Ehsanollah Habibi, Emad Mirsalimi, Faezeh Darabi & Kamran Ebrahimi. (2019) A Survey lifting the cylindrical things and comparing them with the NIOSH lifting index. Journal of Ergonomics 6:4, pages 46-57.
Crossref
Crossref
Mohamad Behjati & Navid Arjmand. (2018) Biomechanical Assessment of the NIOSH Lifting Equation in Asymmetric Load-Handling Activities Using a Detailed Musculoskeletal Model. Human Factors: The Journal of the Human Factors and Ergonomics Society 61:2, pages 191-202.
Crossref
Crossref
P. Khoddam-Khorasani, N. Arjmand & A. Shirazi-Adl. (2018) Trunk Hybrid Passive–Active Musculoskeletal Modeling to Determine the Detailed T12–S1 Response Under In Vivo Loads. Annals of Biomedical Engineering 46:11, pages 1830-1843.
Crossref
Crossref
S Samadi & N Arjmand. (2018) A novel stability-based EMG-assisted optimization method for the spine. Medical Engineering & Physics 58, pages 13-22.
Crossref
Crossref
F. Azari, N. Arjmand, A. Shirazi-Adl & T. Rahimi-Moghaddam. (2018) A combined passive and active musculoskeletal model study to estimate L4-L5 load sharing. Journal of Biomechanics 70, pages 157-165.
Crossref
Crossref
. 2018. Ergonomics. Ergonomics
661
704
.
Alena Otto, Nils Boysen, Armin Scholl & Rico Walter. (2017) Ergonomic workplace design in the fast pick area. OR Spectrum 39:4, pages 945-975.
Crossref
Crossref
Ming-Lun Lu, Vern Putz-Anderson, Arun Garg & Kermit G. Davis. (2016) Evaluation of the Impact of the Revised National Institute for Occupational Safety and Health Lifting Equation. Human Factors: The Journal of the Human Factors and Ergonomics Society 58:5, pages 667-682.
Crossref
Crossref
Marcel Dreischarf, Aboulfazl Shirazi-Adl, Navid Arjmand, Antonius Rohlmann & Hendrik Schmidt. (2016) Estimation of loads on human lumbar spine: A review of in vivo and computational model studies. Journal of Biomechanics 49:6, pages 833-845.
Crossref
Crossref
Nicholas J. La Delfa & Jim R. Potvin. (2016) Predicting manual arm strength: A direct comparison between artificial neural network and multiple regression approaches. Journal of Biomechanics 49:4, pages 602-605.
Crossref
Crossref
Ratri Parida, Sagar Sarkar & Pradip Kumar Ray. 2016. Smart Technologies for Smart Nations. Smart Technologies for Smart Nations
195
216
.
Murali Subramaniyam, Seung Nam Min, Se Jin Park & Sangho Park. (2015) Muscle activity and spinal loading in lifting symmetrical loads beside the body compared to in front of the body. Journal of Mechanical Science and Technology 29:12, pages 5075-5081.
Crossref
Crossref
Yousef Mohammadi, Navid Arjmand & Aboulfazl Shirazi-Adl. (2015) Comparison of trunk muscle forces, spinal loads and stability estimated by one stability- and three EMG-assisted optimization approaches. Medical Engineering & Physics 37:8, pages 792-800.
Crossref
Crossref
Mohammad Ali Rajaee, Navid Arjmand, Aboulfazl Shirazi-Adl, André Plamondon & Hendrik Schmidt. (2015) Comparative evaluation of six quantitative lifting tools to estimate spine loads during static activities. Applied Ergonomics 48, pages 22-32.
Crossref
Crossref
Ratri Parida & Pradip Kumar Ray. (2015) Biomechanical Modelling of Manual Material Handling Tasks: A Comprehensive Review. Procedia Manufacturing 3, pages 4598-4605.
Crossref
Crossref
M. Hajihosseinali, N. Arjmand & A. Shirazi-Adl. (2015) Effect of body weight on spinal loads in various activities: A personalized biomechanical modeling approach. Journal of Biomechanics 48:2, pages 276-282.
Crossref
Crossref
Jim R. Potvin. (2014) Comparing the revised NIOSH lifting equation to the psychophysical, biomechanical and physiological criteria used in its development. International Journal of Industrial Ergonomics 44:2, pages 246-252.
Crossref
Crossref
Pieter Coenen, Idsart Kingma, Cécile R.L. Boot, Paulien M. Bongers & Jaap H. van Dieën. (2013) Inter-rater reliability of a video-analysis method measuring low-back load in a field situation. Applied Ergonomics 44:5, pages 828-834.
Crossref
Crossref
Pieter Coenen, Idsart Kingma, Cécile R.L. Boot, Paulien M. Bongers & Jaap H. van Dieën. (2012) The contribution of load magnitude and number of load cycles to cumulative low-back load estimations: A study based on in-vitro compression data. Clinical Biomechanics 27:10, pages 1083-1086.
Crossref
Crossref
Henk F. van der Molen, P. Paul F.M. Kuijer, Margriet Formanoy, Lennart Bron, Marco J.M. Hoozemans, Bart Visser & Monique H.W. Frings-Dresen. (2010) Evaluation of three ergonomic measures on productivity, physical work demands, and workload in gypsum bricklayers. American Journal of Industrial Medicine, pages n/a-n/a.
Crossref
Crossref
Samuel J. Howarth, Tyson A.C. Beach, Adam J. Pearson & Jack P. Callaghan. (2009) Using sitting as a component of job rotation strategies: Are lifting/lowering kinetics and kinematics altered following prolonged sitting. Applied Ergonomics 40:3, pages 433-439.
Crossref
Crossref
Jim R. Potvin. (2008) Occupational spine biomechanics: A journey to the spinal frontier. Journal of Electromyography and Kinesiology 18:6, pages 891-899.
Crossref
Crossref
André Plamondon, Alain Delisle, Karin Trimble, Pierre Desjardins & Trevor Rickwood. (2006) Manual materials handling in mining: The effect of rod heights and foot positions when lifting “in-the-hole” drill rods. Applied Ergonomics 37:6, pages 709-718.
Crossref
Crossref
Tyson A.C. Beach, Stephanie K. Coke & Jack P. Callaghan. (2006) Upper body kinematic and low-back kinetic responses to precision placement challenges and cognitive distractions during repetitive lifting. International Journal of Industrial Ergonomics 36:7, pages 637-650.
Crossref
Crossref
Pernille Kofoed Nielsen, Lone Andersen & Kurt Jørgensen. (1998) The muscular load on the lower back and shoulders due to lifting at different lifting heights and frequencies. Applied Ergonomics 29:6, pages 445-450.
Crossref
Crossref
![Supercharge Your Next Research Paper: Research and write your next paper with Jenni AI.]({"type":"image" , "src" : "/sda/112446/MPU-L1EB.png"})