Heiko Diefenbach, Eric H. Grosse & Christoph H. Glock. (2024) Human-and-cost-centric storage assignment optimization in picker-to-parts warehouses. European Journal of Operational Research 315:3, pages 1049-1068.
Crossref
Minqi Zhang, Eric H. Grosse & Christoph H. Glock. (2023) Ergonomic and economic evaluation of a collaborative hybrid order picking system. International Journal of Production Economics 258, pages 108774.
Crossref
Masood Ashraf, Mohammad Muzammil & Abid Ali Khan. 2022. Ergonomics for Improved Productivity. Ergonomics for Improved Productivity
51
58
.
Saman Ahmad & Mohammad Muzammil. 2022. Ergonomics for Design and Innovation. Ergonomics for Design and Innovation
119
128
.
Sarah M. Remedios & Steven L. Fischer. (2021) Towards the Use of 2D Video-Based Markerless Motion Capture to Measure and Parameterize Movement During Functional Capacity Evaluation. Journal of Occupational Rehabilitation 31:4, pages 754-767.
Crossref
Sebastian Skals, Rúni Bláfoss, Mark de Zee, Lars Louis Andersen & Michael Skipper Andersen. (2021) Effects of load mass and position on the dynamic loading of the knees, shoulders and lumbar spine during lifting: a musculoskeletal modelling approach. Applied Ergonomics 96, pages 103491.
Crossref
Na Yu, Lian Hong & Jing Guo. (2021) Analysis of upper-limb muscle fatigue in the process of rotary handling. International Journal of Industrial Ergonomics 83, pages 103109.
Crossref
Sebastian Skals, Rúni Bláfoss, Lars Louis Andersen, Michael Skipper Andersen & Mark de Zee. (2021) Manual material handling in the supermarket sector. Part 2: Knee, spine and shoulder joint reaction forces. Applied Ergonomics 92, pages 103345.
Crossref
Mark G. Boocock, Steve Taylor & Grant A. Mawston. (2020) The influence of age on spinal and lower limb muscle activity during repetitive lifting. Journal of Electromyography and Kinesiology 55, pages 102482.
Crossref
Heiko Diefenbach, Simon Emde & Christoph H. Glock. (2020) Loading tow trains ergonomically for just-in-time part supply. European Journal of Operational Research 284:1, pages 325-344.
Crossref
Fares F. Alferdaws & Mohamed Z. Ramadan. (2020) Effects of Lifting Method, Safety Shoe Type, and Lifting Frequency on Maximum Acceptable Weight of Lift, Physiological Responses, and Safety Shoes Discomfort Rating. International Journal of Environmental Research and Public Health 17:9, pages 3012.
Crossref
Anurag Vijaywargiya & Mahesh Bhiwapurkar. 2020. Reliability and Risk Assessment in Engineering. Reliability and Risk Assessment in Engineering
295
303
.
Ali Ahmed Shokshk, Siti Azfanizam Ahmad, Faieza Abdul Aziz, Hazreen H. Harith, Azizul Rahman Abd Aziz & Salami Bahariah Suliano. 2020. Advances in Material Sciences and Engineering. Advances in Material Sciences and Engineering
75
80
.
Zenija Roja, Henrijs Kalkis, Sandis Babris, Inara Roja, Kristine Bokse & Ansis Ventins. 2020. Advances in Physical Ergonomics and Human Factors. Advances in Physical Ergonomics and Human Factors
14
21
.
Heiko Diefenbach & Christoph H. Glock. (2019) Ergonomic and economic optimization of layout and item assignment of a U-shaped order picking zone. Computers & Industrial Engineering 138, pages 106094.
Crossref
E Nurmianto, A Anzip & Sampurno. (2019) Design of mobile, portable and ergonomic fish smoke machine on a motorcycle. IOP Conference Series: Materials Science and Engineering 674:1, pages 012047.
Crossref
Saad Alabdulkarim & Maury A. Nussbaum. (2019) Influences of different exoskeleton designs and tool mass on physical demands and performance in a simulated overhead drilling task. Applied Ergonomics 74, pages 55-66.
Crossref
Babak Barazandeh, Kaveh Bastani, Mohammadhussein Rafieisakhaei, Sunwook Kim, Zhenyu Kong & Maury A. Nussbaum. (2018) Robust Sparse Representation-Based Classification Using Online Sensor Data for Monitoring Manual Material Handling Tasks. IEEE Transactions on Automation Science and Engineering 15:4, pages 1573-1584.
Crossref
. 2018. Ergonomics. Ergonomics
661
704
.
William Sherlaw, Cyrille Harpet, Zoe Heritage & Jocelyn Raude. 2018. Principles and Concepts of Behavioral Medicine. Principles and Concepts of Behavioral Medicine
415
469
.
Zahra Sedighi Maman, Mohammad Ali Alamdar Yazdi, Lora A. Cavuoto & Fadel M. Megahed. (2017) A data-driven approach to modeling physical fatigue in the workplace using wearable sensors. Applied Ergonomics 65, pages 515-529.
Crossref
Robert R. Fox, Rammohan V. Maikala, Stephen Bao, Patrick G. Dempsey, George Brogmus, Joel Cort & Rammohan V. Maikala. (2017) The Relevance of Psychophysical Methods Research for the Practitioner. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 61:1, pages 997-999.
Crossref
Bruno M. Razza, Luis Carlos Paschoarelli, Cristina C. Lucio & Danilo Silva. 2016. Ergonomics in Design Methods & Techniques. Ergonomics in Design Methods & Techniques
169
181
.
Ben Beck, Daniel J. Ham, Stuart A. Best, Greg L. Carstairs, Robert J. Savage, Lahn Straney & Joanne N. Caldwell. (2016) Predicting Endurance Time in a Repetitive Lift and Carry Task Using Linear Mixed Models. PLOS ONE 11:7, pages e0158418.
Crossref
Raee S. Alqhtani, Michael D. Jones, Peter S. Theobald & Jonathan M. Williams. (2016) Investigating the contribution of the upper and lower lumbar spine, relative to hip motion, in everyday tasks. Manual Therapy 21, pages 268-273.
Crossref
R. Rajesh. (2016) Manual Material Handling: A Classification Scheme. Procedia Technology 24, pages 568-575.
Crossref
Jay P. Mehta, Steven A. Lavender, Richard J. Jagacinski & Carolyn M. Sommerich. (2014) Effects of Task Precision Demands on Behavioral and Physiological Changes During a Repetitive Asymmetric Lifting Activity. Human Factors: The Journal of the Human Factors and Ergonomics Society 57:3, pages 435-446.
Crossref
Mark G. Boocock, Grant A. Mawston & Steve Taylor. (2015) Age-related differences do affect postural kinematics and joint kinetics during repetitive lifting. Clinical Biomechanics 30:2, pages 136-143.
Crossref
Ki-Woong Kim. (2014) Association Between Occupational Standing Time and Metabolic Syndrome in Korean Male Workers. Journal of Korean Society of Occupational and Environmental Hygiene 24:3, pages 383-392.
Crossref
Rammohan V. Maikala, Lora A. Cavuoto, Wayne S. Maynard, Robert R. Fox, Jia-Hua Lin, Jian Liu & Martin Lavallière. (2014) Aging, Obesity and Beyond. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 58:1, pages 1648-1652.
Crossref
J.P. Mehta, S.A. Lavender, R.J. Jagacinski & C.M. Sommerich. (2014) Effects of Seated Whole Body Vibration Exposure on Repetitive Asymmetric Lifting Tasks. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 58:1, pages 1627-1628.
Crossref
Jesper Sandfeld, Christian Rosgaard & Bente Rona Jensen. (2014) L4–L5 compression and anterior/posterior joint shear forces in cabin attendants during the initial push/pull actions of airplane meal carts. Applied Ergonomics 45:4, pages 1067-1075.
Crossref
Rammohan V. Maikala, Vincent M. Ciriello, Niall V. O'Brien, Jacob J. Banks & Amanda J. Rivard. (2014) Forearm muscle hemodynamic responses in healthy men during a seven-hour exposure to repetitive ulnar deviation task – A psychophysiological study. International Journal of Industrial Ergonomics 44:2, pages 214-224.
Crossref
Steven L. Fischer & Clark R. Dickerson. (2014) Applying psychophysics to prevent overexposure: On the relationships between acceptable manual force, joint loading, and perception. International Journal of Industrial Ergonomics 44:2, pages 266-274.
Crossref
Jungyong Lee & Maury A. Nussbaum. (2013) Experienced workers may sacrifice peak torso kinematics/kinetics for enhanced balance/stability during repetitive lifting. Journal of Biomechanics 46:6, pages 1211-1215.
Crossref
Claus Backhaus, Karl-Heinz Jubt, Chistian Felten, Jörg Hedtmann, Markus Post & Rolf Ellegast. (2012) Belastung des Muskel-Skelett-Systems beim Ziehen und Schieben von MüllgroßbehälternCharge du système de squelette de muscle en tirant et poussant des conteneurs de déchets de grande capacitéThe musculoskeletal strain during pushing and pulling of waste containers. Zeitschrift für Arbeitswissenschaft 66:4, pages 327-346.
Crossref
Shreya Maulik, Amitabha De & Rauf Iqbal. (2012) Work related musculoskeletal disorders among medical laboratory technicians. Work related musculoskeletal disorders among medical laboratory technicians.
S. M. Mizanoor RAHMAN, Ryojun IKEURA, Soichiro HAYAKAWA & Haoyong YU. (2011) Manipulating Objects with a Power Assist Robot in Linear Vertical and Harmonic Motion: Psychophysical-Biomechanical Approach to Analyzing Human Characteristics to Improve the Control. Journal of Biomechanical Science and Engineering 6:5, pages 399-414.
Crossref
S. Asensio-Cuesta, J.A. Diego-Mas & J. Alcaide-Marzal. (2010) Applying generalised feedforward neural networks to classifying industrial jobs in terms of risk of low back disorders. International Journal of Industrial Ergonomics 40:6, pages 629-635.
Crossref
Kai Way Li, Shu-Yu Ho & Chi Fung Liu. (2010) A study of combined manual materials handling tasks under footwear and lifting and lowering height conditions. A study of combined manual materials handling tasks under footwear and lifting and lowering height conditions.
Swei-Pi Wu & Shu-Yu Chang. (2010) Effects of carrying methods and box handles on two-person team carrying capacity for females. Applied Ergonomics 41:4, pages 615-619.
Crossref
Kent J Adams, Mark DeBeliso, Patricia G Sevene-Adams, Joseph M Berning, Tiev Miller & David J Tollerud. (2010) Physiological and Psychophysical Comparison Between a Lifting Task With Identical Weight but Different Coupling Factors. Journal of Strength and Conditioning Research 24:2, pages 307-312.
Crossref
Kai Way Li & Chih Fung Liu. (2009) Determination of maximum acceptable weight of handling in combined manual materials handling tasks. Determination of maximum acceptable weight of handling in combined manual materials handling tasks.
Rammohan V. MaikalaVincent M. Ciriello, Patrick G. Dempsey & Niall V. O'Brien. (2009) Psychophysiological Responses in Women During Cart Pushing on Different Frictional Walkways. Human Factors: The Journal of the Human Factors and Ergonomics Society 51:5, pages 681-693.
Crossref
Venkatesh Balasubramanian, K. Adalarasu & Rahul Regulapati. (2009) Comparing dynamic and stationary standing postures in an assembly task. International Journal of Industrial Ergonomics 39:5, pages 649-654.
Crossref
Kai Way Li, Rui-feng Yu, Yang Gao, Rammohan V. Maikala & Hwa-Hwa Tsai. (2009) Physiological and perceptual responses in male Chinese workers performing combined manual materials handling tasks. International Journal of Industrial Ergonomics 39:2, pages 422-427.
Crossref
Nancy A. Nelson & Richard E. Hughes. (2009) Quantifying relationships between selected work-related risk factors and back pain: A systematic review of objective biomechanical measures and cost-related health outcomes. International Journal of Industrial Ergonomics 39:1, pages 202-210.
Crossref
Diyar Akay & M. Duran Toksari. (2008) Ant colony optimization approach for classification of occupational low back disorder risks. Human Factors and Ergonomics in Manufacturing & Service Industries 19:1, pages 1-14.
Crossref
Venkatesh Balasubramanian, Kanagasabai Adalarasu & Rahul Regulapati. (2008) Comparing stationary standing with an intermittent walking posture during assembly operations. Human Factors and Ergonomics in Manufacturing & Service Industries 18:6, pages 666-677.
Crossref
K Peter Gill, Simon J. Bennett, Geert J. P. Savelsbergh & Jaap H. van Dieën. (2007) Regional Changes in Spine Posture at Lift Onset With Changes in Lift Distance and Lift Style. Spine 32:15, pages 1599-1604.
Crossref
Steven J. Russell, Lori Winnemuller, Janice E. Camp & Peter W. Johnson. (2007) Comparing the results of five lifting analysis tools. Applied Ergonomics 38:1, pages 91-97.
Crossref
Swei-Pi Wu. (2006) Psychophysically determined 1-h load carrying capacity of Chinese females. International Journal of Industrial Ergonomics 36:10, pages 891-899.
Crossref
Aaron Miller, Chris Engst, Robert B. Tate & Annalee Yassi. (2006) Evaluation of the effectiveness of portable ceiling lifts in a new long-term care facility. Applied Ergonomics 37:3, pages 377-385.
Crossref
Patrick G. Dempsey & Svend Erik Mathiassen. (2006) On the evolution of task-based analysis of manual materials handling, and its applicability in contemporary ergonomics. Applied Ergonomics 37:1, pages 33-43.
Crossref
Patrick Dempsey & Moira Munro. 2005. Evaluation of Human Work, 3rd Edition. Evaluation of Human Work, 3rd Edition
497
523
.
R.S. Barrett & G.J. Dennis. (2005) Ergonomic issues in team lifting. Human Factors and Ergonomics in Manufacturing 15:3, pages 293-307.
Crossref
Steven Russell, Lori Winnemuller, Janice Camp & Peter Johnson. (2016) Comparing Results of Four Lifting Analysis Tools. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 48:12, pages 1368-1372.
Crossref
Stover Snook. 2004. Handbook of Human Factors and Ergonomics Methods. Handbook of Human Factors and Ergonomics Methods
13-1
13-23
.
Robert Andres. 2004. Muscle Strength. Muscle Strength
345
365
.
Chien-Chi Chang, Simon Hsiang, Patrick G. Dempsey & Raymond W. McGorry. (2003) A computerized video coding system for biomechanical analysis of lifting tasks. International Journal of Industrial Ergonomics 32:4, pages 239-250.
Crossref
Swei-Pi Wu. (2003) Maximum acceptable weights for asymmetric lifting of Chinese females. Applied Ergonomics 34:3, pages 215-224.
Crossref
Aparecida Mari Iguti & Eduardo Luiz Hoehne. (2003) Lombalgias e trabalho. Revista Brasileira de Saúde Ocupacional 28:107-108, pages 73-89.
Crossref
Swei-Pi Wu. (2000) Psychophysically determined symmetric and asymmetric lifting capacity of Chinese males for one hour's work shifts. International Journal of Industrial Ergonomics 25:6, pages 675-682.
Crossref
Chuen-Lung Chen, David B. Kaber & Patrick G. Dempsey. (2000) A new approach to applying feedforward neural networks to the prediction of musculoskeletal disorder risk. Applied Ergonomics 31:3, pages 269-282.
Crossref
Patrick G. Dempsey. (1999) Utilizing criteria for assessing multiple-task manual materials handling jobs. International Journal of Industrial Ergonomics 24:4, pages 405-416.
Crossref