Citations (90)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (34)
Kuen-Suan Chen, Yuan-Lung Lai, Ming-Chieh Huang & Tsang-Chuan Chang. (2023) Fuzzy judgement model for assessment of improvement effectiveness to performance of processing characteristics. International Journal of Production Research 61:5, pages 1591-1605.
Read now
Read now
Muhammad Aslam, G. Srinivasa Rao, Liaquat Ahmad & Chi-Hyuck Jun. (2022) A new control chart using GINI CPK. Communications in Statistics - Theory and Methods 51:1, pages 197-211.
Read now
Read now
Chun-Min Yu, Kuen-Suan Chen & Yun-Yu Guo. (2021) Production data evaluation analysis model: a case study of broaching machine. Journal of the Chinese Institute of Engineers 44:7, pages 673-682.
Read now
Read now
G. Srinivasa Rao, Muhammad Aslam & Chi-Hyuck Jun. (2021) A variable sampling plan using generalized multiple dependent state based on a one-sided process capability index. Communications in Statistics - Simulation and Computation 50:9, pages 2666-2677.
Read now
Read now
Kuen-Suan Chen, Tsang-Chuan Chang & Yi-Yu Guo. (2020) Selecting an optimal contractor for production outsourcing: a case study of gear grinding. Journal of the Chinese Institute of Engineers 43:5, pages 415-424.
Read now
Read now
Mei-Fang Wu, Hsuan-Yu Chen, Tsang-Chuan Chang & Chih-Feng Wu. (2019) Quality evaluation of internal cylindrical grinding process with multiple quality characteristics for gear products. International Journal of Production Research 57:21, pages 6687-6701.
Read now
Read now
Tsang-Chuan Chang & Kuen-Suan Chen. (2019) Testing process quality of wire bonding with multiple gold wires from viewpoint of producers. International Journal of Production Research 57:17, pages 5400-5413.
Read now
Read now
Chun-Ming Yang, Kuen-Suan Chen & Chang-Hsien Hsu. (2019) Developing a multi-quality characteristic analysis model to measure the quality of quick-release bicycle hubs. Journal of the Chinese Institute of Engineers 42:4, pages 309-318.
Read now
Read now
Kuen-Suan Chen, Hsi-Tien Chen & Tsang-Chuan Chang. (2017) The construction and application of Six Sigma quality indices. International Journal of Production Research 55:8, pages 2365-2384.
Read now
Read now
Muhammad Aslam, N. Khan, Liaquat Ahmad, Chi-Hyuck Jun & Jaffer Hussain. (2017) A mixed control chart using process capability index. Sequential Analysis 36:2, pages 278-289.
Read now
Read now
Chang-Hsien Hsu, Kuen-Suan Chen & Chun-Ming Yang. (2016) Construction of closed interval for process capability indices C, C, and S based on Boole’s inequality and de Morgan’s laws. Journal of Statistical Computation and Simulation 86:18, pages 3701-3714.
Read now
Read now
Kun-Tzu Yu & Kuen-Suan Chen. (2016) Testing and analysing capability performance for products with multiple characteristics. International Journal of Production Research 54:21, pages 6633-6643.
Read now
Read now
Ching-Ho Yen, Chia-Hao Chang & Muhammad Aslam. (2015) Repetitive variable acceptance sampling plan for one-sided specification. Journal of Statistical Computation and Simulation 85:6, pages 1102-1116.
Read now
Read now
Liang-Yuh Ouyang, Kuen-Suan Chen, Chun-Ming Yang & Chang-Hsien Hsu. (2014) Using a QCAC–Entropy–TOPSIS approach to measure quality characteristics and rank improvement priorities for all substandard quality characteristics. International Journal of Production Research 52:10, pages 3110-3124.
Read now
Read now
Yohanes Kristianto, Angappa Gunasekaran & Jianxin Jiao. (2014) Logical reconfiguration of reconfigurable manufacturing systems with stream of variations modelling: a stochastic two-stage programming and shortest path model. International Journal of Production Research 52:5, pages 1401-1418.
Read now
Read now
Bi-Min Hsu, Lin-Ying Hsu & Ming-Hung Shu. (2013) Evaluation of supply chain performance using delivery-time performance analysis chart approach. Journal of Statistics and Management Systems 16:1, pages 73-87.
Read now
Read now
S. Khodaygan & M. R. Movahhedy. (2012) Fuzzy-based analysis of process capability for assembly quality assessment in mechanical assemblies. International Journal of Production Research 50:12, pages 3395-3415.
Read now
Read now
J. Chen, F. Zhu, G.Y. Li, Y.Z. Ma & Y.L. Tu. (2012) Capability index of a complex-product machining process. International Journal of Production Research 50:12, pages 3382-3394.
Read now
Read now
Chang-Hung Hung & Chang-Hsien Hsu. (2011) Physical fitness indices for data with non-normal distribution. Journal of Information and Optimization Sciences 32:1, pages 245-254.
Read now
Read now
Y. H. Chen, K. S. Chen, S. C. Chen & S. J. Liao. (2010) Capability evaluation for a product family composed of unilateral and multi-process quality characteristics. Journal of Statistics and Management Systems 13:5, pages 1055-1068.
Read now
Read now
Wen-Tsann Lin, Shen-Tsu Wang, Meng-Hua Li, Jiung-Ming Huang & Ken-Suan Chen. (2010) An evaluation model for process capability of multiple-process machinery: a case study on the transfer machinery. Journal of Statistics and Management Systems 13:3, pages 445-466.
Read now
Read now
Angus Jeang. (2010) Optimal process capability analysis for process design. International Journal of Production Research 48:4, pages 957-989.
Read now
Read now
C. T. Hsieh, K. S. Chen & S. C. Chen. (2009) Quality performance analysis for the whole product family with multiple characteristics: apply the cooling pump as an example. Journal of Statistics and Management Systems 12:5, pages 927-938.
Read now
Read now
K.S. Chen, L.Y. Ouyang & C.H. Hsu. (2009) A measuring model of process capability to consider sampling error. Journal of Information and Optimization Sciences 30:4, pages 843-853.
Read now
Read now
Dja-Shin Wang, Tong-Yuan Koo & Chao-Yu Chou. (2008) Multiple streams process capability analysis chart. Journal of Information and Optimization Sciences 29:5, pages 835-847.
Read now
Read now
K. S. Chen, M. L. Huang & Y. H. Hung. (2008) Process capability analysis chart with the application of
. International Journal of Production Research 46:16, pages 4483-4499.
Read now
Read now
C. H. Hung & J. C. Su. (2008) Group evaluation of body mass index. Journal of Statistics and Management Systems 11:3, pages 439-445.
Read now
Read now
Jui-Shin Lin, Shiaw-Wen Tien & C. H. Hsu. (2008) The adoption of six sigma methodology to close learning-doing gap. Journal of Statistics and Management Systems 11:1, pages 49-64.
Read now
Read now
H. T. Chen & K. S. Chen. (2007) Advanced multi-process performance analysis chart for an entire product with joint confidence regions. International Journal of Production Research 45:9, pages 2141-2159.
Read now
Read now
W. L. Pearn, Y. C. Chang & Chien-Wei Wu. (2006) Multiple-process performance analysis chart based on process loss indices. International Journal of Systems Science 37:7, pages 429-435.
Read now
Read now
K. S. Chen & M. L. Huang. (2006) Performance measurement for a manufacturing system based on quality, cost and time. International Journal of Production Research 44:11, pages 2221-2243.
Read now
Read now
W. L. Pearn
, M. H. Shu & B. M. Hsu. (2005) Monitoring manufacturing quality for multiple Li-BPIC processes based on capability index C
. International Journal of Production Research 43:12, pages 2493-2512.
Read now
Read now
M. H. Shu. (2004) Manufacturing capability information for multiple product quality characteristics: a case study to precision voltage reference. Journal of Information and Optimization Sciences 25:2, pages 403-420.
Read now
Read now
Wen-Pei Sung, Kuen-Suan Chen, Wernshyuan Song & Yu-Yin Tsai. (2003) Evaluation Method for Performance of Formwork Process of Construction Industry. Journal of Asian Architecture and Building Engineering 2:2, pages b1-b6.
Read now
Read now
Articles from other publishers (56)
Tanya Avramova, Dimka Vasileva & Teodora Peneva. An overview of the basic concepts and terms related to manufacturing process capability evaluation. An overview of the basic concepts and terms related to manufacturing process capability evaluation.
Rupinder Singh, Anish Das, Arun Anand & Sandeep Kumar. On assembly features and process capability analysis of direct metal laser sintering based functional prototypes. On assembly features and process capability analysis of direct metal laser sintering based functional prototypes.
Kuen-Suan Chen & Chun-Min Yu. (2023) Confidence-interval-based fuzzy supplier selection model with lifetime performance index. Annals of Operations Research.
Crossref
Crossref
Wen-Pei Sung & Ming-Hsiang Shih. (2023) A chart to evaluate the effect of active control on a bridge. Proceedings of the Institution of Civil Engineers - Bridge Engineering, pages 1-15.
Crossref
Crossref
Hsuan-Yu Chen & Kuo-Ping Lin. (2022) Fuzzy supplier selection model based on lifetime performance index. Expert Systems with Applications 208, pages 118135.
Crossref
Crossref
Zhan-Xiang Hu, Chang-Chiun Huang, Amit Kumar Gope & Chung-Feng Jeffrey Kuo. (2022) Improvement in Injection Molding Quality Performance with Innovative Cyclone Mixers Used in Polypropylene with Spherical Silicon Dioxide Composites. Polymers 14:22, pages 4932.
Crossref
Crossref
Kuen-Suan Chen, Ming-Chieh Huang, Chun-Min Yu & Hsuan-Yu Chen. (2022) Quality-Based Supplier Selection Model for Products with Multiple Quality Characteristics. Sustainability 14:14, pages 8532.
Crossref
Crossref
Kuen-Suan Chen & Chun-Min Yu. (2021) Dual dimensional fuzzy testing based on upper confidence limits for supplier selection. Journal of Intelligent & Fuzzy Systems 40:6, pages 11145-11158.
Crossref
Crossref
Natalia Beltrán, Braulio J. Álvarez, David Blanco, Álvaro Noriega & Pedro Fernández. (2021) Estimation and Improvement of the Achievable Tolerance Interval in Material Extrusion Additive Manufacturing through a Multi-State Machine Performance Perspective. Applied Sciences 11:12, pages 5325.
Crossref
Crossref
Wei Lo, Chun-Ming Yang, Kuei-Kuei Lai, Shao-Yu Li & Chi-Han Chen. (2021) Developing a Novel Fuzzy Evaluation Model by One-Sided Specification Capability Indices. Mathematics 9:10, pages 1076.
Crossref
Crossref
Rubel Ahammed & Md. Zahid Hasan. (2020) Humming noise reduction of ceiling fan in the mass production applying DMAIC-six sigma approach. World Journal of Engineering 18:1, pages 106-121.
Crossref
Crossref
Elif Elçin Günay, Anusha Velineni, Kijung Park & Gül E. Okudan Kremer. (2019) An Investigation on Process Capability Analysis for Fused Filament Fabrication. International Journal of Precision Engineering and Manufacturing 21:4, pages 759-774.
Crossref
Crossref
Kuo-Ping Lin, Chun-Min Yu & Kuen-Suan Chen. (2019) Production data analysis system using novel process capability indices-based circular economy. Industrial Management & Data Systems 119:8, pages 1655-1668.
Crossref
Crossref
Chen, Yu, Hsu, Cai & Chiou. (2019) A Model for Evaluating the Performance of the Bearing Manufacturing Process. Applied Sciences 9:15, pages 3105.
Crossref
Crossref
Aslam & Albassam. (2019) Inspection Plan Based on the Process Capability Index Using the Neutrosophic Statistical Method. Mathematics 7:7, pages 631.
Crossref
Crossref
Kuen-Suan Chen & Chun-Ming Yang. (2019) Quality Capability Assessment for Thin-Film Chip Resistor. IEEE Access 7, pages 92511-92516.
Crossref
Crossref
Vikash Gupta, Rahul Jain, M. L. Meena & G. S. Dangayach. (2017) Six-sigma application in tire-manufacturing company: a case study. Journal of Industrial Engineering International 14:3, pages 511-520.
Crossref
Crossref
Mazin Al-wswasi, Atanas Ivanov & Harris Makatsoris. (2018) A survey on smart automated computer-aided process planning (ACAPP) techniques. The International Journal of Advanced Manufacturing Technology 97:1-4, pages 809-832.
Crossref
Crossref
S. Khodaygan. (2017) A method for optimal reduction of locating error with the minimum adjustments of locators based on the geometric capability ratio of process. The International Journal of Advanced Manufacturing Technology 94:9-12, pages 3963-3978.
Crossref
Crossref
Bikramjit Podder, Taraknath De, S. Saikumar & K.Ramesh Kumar. (2018) Process capability study of flow formed shell diameter. Materials Today: Proceedings 5:13, pages 27094-27099.
Crossref
Crossref
K.-S. ChenC.-H. Hsu, L.-Y. OuyangC.-M. Yang. (2017) Applying MQCAC and Fuzzy TOPSIS to Improve the Unleaded Gasoline Quality. Journal of Testing and Evaluation 45:3, pages 20150426.
Crossref
Crossref
Tsang-Chuan ChangKuen-Suan ChenChun-Min Yu. (2016) Process Quality Assessment Model of Hand Tools: A Case Study on the Handle of Ratchet Torque Wrench. International Journal of Reliability, Quality and Safety Engineering 23:05, pages 1650017.
Crossref
Crossref
Chang Hsien Hsu, Chun Ming Yang, Chi Yuan Chen & Erin Wei Ling Ding. (2015) Applying Process Capability Analysis in Paint Industry. Applied Mechanics and Materials 775, pages 464-467.
Crossref
Crossref
Encarnación Álvarez, Pablo J. Moya-Férnandez, Francisco J. Blanco-Encomienda & Juan F. Muñoz. (2015) Methodological insights for industrial quality control management: The impact of various estimators of the standard deviation on the process capability index. Journal of King Saud University - Science 27:3, pages 271-277.
Crossref
Crossref
Kuen-Suan Chen, Shiang-Li Yang & Hsi-Tien Chen. (2015) Process improvement capability index with cost – A modeling method of mathematical programming. Applied Mathematical Modelling 39:5-6, pages 1577-1586.
Crossref
Crossref
Fernanda Siqueira Souza, Danilo Cuzzuol Pedrini & Carla Schwengber ten Caten. (2014) Proposta de fluxograma orientativo para aplicação de índices de capacidade. Gestão & Produção 21:4, pages 882-894.
Crossref
Crossref
Tsang-Chuan ChangKung-Jeng WangKuen-Suan Chen. (2013) Capability performance analysis for processes with multiple characteristics using accuracy and precision. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228:5, pages 766-776.
Crossref
Crossref
Faheem Yousaf & Dr. Shahid Ikramullah Butt. (2014) Reduction in Repair rate of Welding Processes by Determination & Controlling of Critical KPIVs. International Journal of Production Management and Engineering 2:1, pages 23.
Crossref
Crossref
Tsang-Chuan Chang, Kung-Jeng Wang & Kuen-Suan Chen. (2014) Sputtering Process Assessment of ITO Film for Multiple Quality Characteristics With One-Sided and Two-Sided Specifications. Journal of Testing and Evaluation 42:1, pages 20130054.
Crossref
Crossref
Kun-Tzu Yu. (2012) A measurement model for service capability from the customer perspective. Service Business 7:4, pages 563-582.
Crossref
Crossref
Liang-Yuh Ouyang, Chang-Hsien Hsu & Chun-Ming Yang. (2013) A new process capability analysis chart approach on the chip resistor quality management. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227:7, pages 1075-1082.
Crossref
Crossref
Chang-Hsien Hsu. (2012) The Process Capability Analysis Model of Hexagonal Infrared Optical Lenses. Journal of Computers 7:11.
Crossref
Crossref
Kuen-Suan Chen, Hsi-Tien Chen & Ching-Hsin Wang. (2012) A Study of Process Quality Assessment for Golf Club-Shaft in Leisure Sport Industries. Journal of Testing and Evaluation 40:3, pages 512-519.
Crossref
Crossref
Jui-Fang Chang & Peng Shi. (2011) Using investment satisfaction capability index based particle swarm optimization to construct a stock portfolio. Information Sciences 181:14, pages 2989-2999.
Crossref
Crossref
C-F Huang, K-S Chen, S-H Sheu & T-S Hsu. (2010) Enhancement of Axle Bearing Quality in Sewing Machines Using Six Sigma. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 224:10, pages 1581-1590.
Crossref
Crossref
K-T Yu, C-Y Shen & D-K Huang. (2009) Integrated model for supplier evaluation: Taking the machine tool industry as an example. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 223:11, pages 1475-1482.
Crossref
Crossref
W. P. SungT. J. ChengC. Y. Chang. (2009) Application of 6-Sigma Methodology to Improve Process Capability of Multiple Characteristics of Fireproof Resin Products. Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management 13:2, pages 82-89.
Crossref
Crossref
Chien-Wei Wu, W.L. Pearn & Samuel Kotz. (2009) An overview of theory and practice on process capability indices for quality assurance. International Journal of Production Economics 117:2, pages 338-359.
Crossref
Crossref
Anugs Jeang, Chien-Ping Chung & Chiao-Ju Hung. (2008) Process capability analysis for life cycle application. Process capability analysis for life cycle application.
J. Y. Dantan, A. Hassan, A. Etienne, A. Siadat & P. Martin. (2008) Information modeling for variation management during the product and manufacturing process design. International Journal on Interactive Design and Manufacturing (IJIDeM) 2:2, pages 107-118.
Crossref
Crossref
K.S. Chen & T.W. Chen. (2008) Multi-process capability plot and fuzzy inference evaluation. International Journal of Production Economics 111:1, pages 70-79.
Crossref
Crossref
K. T. Yu, S. H. Sheu & K. S. Chen. (2006) Testing multi-characteristic product capability indices. The International Journal of Advanced Manufacturing Technology 34:5-6, pages 421-429.
Crossref
Crossref
K. S. Chen, H. L. Huang & Chiao Tzu Huang. (2006) Control Charts for One-sided Capability Indices. Quality & Quantity 41:3, pages 413-427.
Crossref
Crossref
K. S. Chen, C. H. Hsu & L. Y. Ouyang. (2006) Applied Product Capability Analysis Chart in Measure Step of Six Sigma. Quality & Quantity 41:3, pages 387-400.
Crossref
Crossref
K. T. Yu, S. H. Sheu & K. S. Chen. (2006) The evaluation of process capability for a machining center. The International Journal of Advanced Manufacturing Technology 33:5-6, pages 505-510.
Crossref
Crossref
S. C. Chen. (2006) Process performance estimation on the quality characteristics of auto engines. The International Journal of Advanced Manufacturing Technology 32:5-6, pages 492-499.
Crossref
Crossref
K. S. Chen, M. L. Huang & P. L. Chang. (2005) Performance evaluation on manufacturing times. The International Journal of Advanced Manufacturing Technology 31:3-4, pages 335-341.
Crossref
Crossref
K.S. Chen, K.T. Yu & S.H. Sheu. (2006) Process capability monitoring chart with an application in the silicon-filler manufacturing process. International Journal of Production Economics 103:2, pages 565-571.
Crossref
Crossref
W.L. Pearn & Chien-Wei Wu. (2006) Production quality and yield assurance for processes with multiple independent characteristics. European Journal of Operational Research 173:2, pages 637-647.
Crossref
Crossref
K.S. Chen, C.H. Wang & H.T. Chen. (2006) A MAIC approach to TFT-LCD panel quality improvement. Microelectronics Reliability 46:7, pages 1189-1198.
Crossref
Crossref
Kuen-Suan Chen, Chang-Hsien Hsu & Chin-Chuan Wu. (2005) Process capability analysis for a multi-process product. The International Journal of Advanced Manufacturing Technology 27:11-12, pages 1235-1241.
Crossref
Crossref
Feng-Tsung Cheng, Kuen-Suan Chen & Wen-Pei Sung. (2005) Evaluation model for the performance of multi-manufacturing time schedule. The International Journal of Advanced Manufacturing Technology 27:3-4, pages 345-350.
Crossref
Crossref
M. L. Huang, K. S. Chen & R. K. Li. (2005) Graphical Analysis of Capability of a Process Producing a Product Family. Quality & Quantity 39:5, pages 643-657.
Crossref
Crossref
Kerstin Vännman. (2005) The Circular Safety Region: a Useful Graphical Tool in Capability Analysis. Quality and Reliability Engineering International 21:5, pages 529-538.
Crossref
Crossref
W.L. Pearn & Ming-Hung Shu. (2003) Manufacturing capability control for multiple power-distribution switch processes based on modified Cpk MPPAC. Microelectronics Reliability 43:6, pages 963-975.
Crossref
Crossref
M.L. Huang, K.S. Chen & Y.H. Hung. (2002) Integrated process capability analysis with an application in backlight module. Microelectronics Reliability 42:12, pages 2009-2014.
Crossref
Crossref