Citations (90)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (22)
Thomas De Lombaert, Kris Braekers, René De Koster & Katrien Ramaekers. (2023) In pursuit of humanised order picking planning: methodological review, literature classification and input from practice. International Journal of Production Research 61:10, pages 3300-3330.
Read now
Read now
Hamdia Mansour, Islam H. Afefy & Sayed M. Taha. (2022) Heuristic-based approach to solve layout design and workers’ assignment problem in the cellular manufacturing system. International Journal of Management Science and Engineering Management 17:1, pages 49-65.
Read now
Read now
S. Ehsan Hashemi-Petroodi, Alexandre Dolgui, Sergey Kovalev, Mikhail Y. Kovalyov & Simon Thevenin. (2021) Workforce reconfiguration strategies in manufacturing systems: a state of the art. International Journal of Production Research 59:22, pages 6721-6744.
Read now
Read now
Niloofar Katiraee, Martina Calzavara, Serena Finco, Daria Battini & Olga Battaïa. (2021) Consideration of workers’ differences in production systems modelling and design: State of the art and directions for future research. International Journal of Production Research 59:11, pages 3237-3268.
Read now
Read now
Mikhail V. Batsyn, Ekaterina K. Batsyna & Ilya S. Bychkov. (2020) NP-completeness of cell formation problem with grouping efficacy objective. International Journal of Production Research 58:20, pages 6159-6169.
Read now
Read now
Huan Jin, Mike Hewitt & Barrett W. Thomas. (2018) Workforce grouping and assignment with learning-by-doing and knowledge transfer. International Journal of Production Research 56:14, pages 4968-4982.
Read now
Read now
Kuo-Ching Ying & Yi-Ju Tsai. (2017) Minimising total cost for training and assigning multiskilled workers in seru production systems. International Journal of Production Research 55:10, pages 2978-2989.
Read now
Read now
Ali Azadeh, Shima Pashapour & Saeed Abdolhossein Zadeh. (2016) Designing a cellular manufacturing system considering decision style, skill and job security by NSGA-II and response surface methodology. International Journal of Production Research 54:22, pages 6825-6847.
Read now
Read now
David A. Nembhard & Frank Bentefouet. (2014) Selection policies for a multifunctional workforce. International Journal of Production Research 52:16, pages 4785-4802.
Read now
Read now
Antonio Costa, Fulvio Antonio Cappadonna & Sergio Fichera. (2014) Joint optimization of a flow-shop group scheduling with sequence dependent set-up times and skilled workforce assignment. International Journal of Production Research 52:9, pages 2696-2728.
Read now
Read now
Ronald G. Askin. (2013) Contributions to the design and analysis of cellular manufacturing systems. International Journal of Production Research 51:23-24, pages 6778-6787.
Read now
Read now
Jiajing Fan & Dingzhong Feng. (2013) Design of cellular manufacturing system with quasi-dynamic dual resource using multi-objective GA. International Journal of Production Research 51:14, pages 4134-4154.
Read now
Read now
N Azizi & M Liang. (2013) An integrated approach to worker assignment, workforce flexibility acquisition, and task rotation. Journal of the Operational Research Society 64:2, pages 260-275.
Read now
Read now
R Bhatnagar & V Saddikuti. (2010) Models for cellular manufacturing systems design: matching processing requirements and operator capabilities. Journal of the Operational Research Society 61:5, pages 827-839.
Read now
Read now
Thomas McDonald, Kimberly P. Ellis, Eileen M. Van Aken & C. Patrick Koelling. (2009) Development and application of a worker assignment model to evaluate a lean manufacturing cell. International Journal of Production Research 47:9, pages 2427-2447.
Read now
Read now
W.H. Elmaraghy, O.A. Nada & H.A. Elmaraghy. (2008) Quality prediction for reconfigurable manufacturing systems via human error modelling. International Journal of Computer Integrated Manufacturing 21:5, pages 584-598.
Read now
Read now
G. Celano, A. Costa & S. Fichera. (2008) Scheduling of unrelated parallel manufacturing cells with limited human resources. International Journal of Production Research 46:2, pages 405-427.
Read now
Read now
K. Fraser, H. Harris & L. Luong. (2007) Improving the implementation effectiveness of cellular manufacturing: a comprehensive framework for practitioners. International Journal of Production Research 45:24, pages 5835-5856.
Read now
Read now
M. Bennour & D. Crestani. (2007) Formalization of a process activity performance estimation approach using human competencies. International Journal of Production Research 45:24, pages 5743-5768.
Read now
Read now
Pornsarun Wirojanagud, Esma S. Gel, John W. Fowler & Robert Cardy. (2007) Modelling inherent worker differences for workforce planning. International Journal of Production Research 45:3, pages 525-553.
Read now
Read now
M. Bennour, D. Crestani
, O. Crespo & F. Prunet. (2005) Computer-aided decision for human task allocation with mono- and multi-performance evaluation. International Journal of Production Research 43:21, pages 4559-4588.
Read now
Read now
Kim LaScola Needy, Bryan A. Norman, Bopaya Bidanda, Poonsiri Ariyawongrat, Wipawee Tharmmaphornphilas & Rona Colosimo Warner. (2002) Assessing Human Capital: A Lean Manufacturing Example. Engineering Management Journal 14:3, pages 35-39.
Read now
Read now
Articles from other publishers (68)
Mohammad Izzuddin Mohammed Jamil. 2023. Transforming Economies Through Microfinance in Developing Nations. Transforming Economies Through Microfinance in Developing Nations
189
214
.
Thanatat Pasupa & Sadami Suzuki. (2022) Two-Stage Adaptive Large Neighbourhood Search for Team Formation and Worker Assignment Problems in Cellular Manufacturing Systems. Applied Sciences 12:16, pages 8323.
Crossref
Crossref
Fikret Korhan TURAN & Gül CORUH. (2022) Sürdürülebilir insan kaynağı yönetimi: Belirsiz fayda fonksiyonlu doğrusal-olmayan atama programı ile çalışan memnuniyetinin arttırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 37:4, pages 2025-2040.
Crossref
Crossref
Busra Nur Yetkin & Berna Haktanirlar Ulutas. (2022) A Skill-Based MILP Model in Cellular Manufacturing Systems with Human-Robot Collaboration. IFAC-PapersOnLine 55:10, pages 1728-1733.
Crossref
Crossref
Ashkan Ayough, Farbod Farhadi & Mostafa Zandieh. (2021) The job rotation scheduling problem considering human cognitive effects: an integrated approach. Assembly Automation 41:2, pages 221-236.
Crossref
Crossref
Ying Zhang, Jing Zhu, Nan Xu, Sophia Xiaoxia Duan & Xiaodi Huang. (2021) Optimal selection of expatriates for cross-border assignment to enhance manufacturing efficiency. International Journal of Production Economics 232, pages 107926.
Crossref
Crossref
Rongfan Liu, Ming Liu, Feng Chu, Feifeng Zheng & Chengbin Chu. (2021) Eco-friendly multi-skilled worker assignment and assembly line balancing problem. Computers & Industrial Engineering 151, pages 106944.
Crossref
Crossref
Aidin Delgoshaei, Aisa Khoshniat Aram & Amir Hossein Nasiri. 2021. Logistics and Supply Chain Management. Logistics and Supply Chain Management
303
318
.
Gürsel Süer, Najat Almasarwah, Omar Alhawari & Casey Davis. (2020) Multi-objective scheduling in labor-intensive manufacturing systems. Journal of Manufacturing Systems 57, pages 469-483.
Crossref
Crossref
Shayan Tavakoli Kafiabad, Masoumeh Kazemi Zanjani & Mustapha Nourelfath. (2020) Integrated planning of operations and on-job training in maintenance logistics networks. Reliability Engineering & System Safety 199, pages 106922.
Crossref
Crossref
Omer Faruk Yilmaz, Gokhan Ozcelik & Fatma Betul Yeni. (2020) Lean holistic fuzzy methodology employing cross-functional worker teams for new product development projects: A real case study from high-tech industry. European Journal of Operational Research 282:3, pages 989-1010.
Crossref
Crossref
Han Sun, Zhiyuan Chen, Shiyang Yan & Lin Xu. (2019) MVP Matching: A Maximum-Value Perfect Matching for Mining Hard Samples, With Application to Person Re-Identification. MVP Matching: A Maximum-Value Perfect Matching for Mining Hard Samples, With Application to Person Re-Identification.
Hazel DURMAZ & Melik KOYUNCU. (2019) Optimization of assignment problems in production lines with different skilled labor levels. International Advanced Researches and Engineering Journal 3:2, pages 123-136.
Crossref
Crossref
Vikrant Sharma, B.D. Gidwani, Vikram Sharma & M.L. Meena. (2019) Implementation model for cellular manufacturing system using AHP and ANP approach. Benchmarking: An International Journal 26:5, pages 1605-1630.
Crossref
Crossref
Amin Aalaei, Vahid Kayvanfar & Hamid Davoudpour. (2017) Integrating multi-dynamic virtual cellular manufacturing systems into multi-market allocation and production planning. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:2, pages 643-664.
Crossref
Crossref
Shayan Tavakoli Kafiabad, Masoumeh Kazemi Zanjani & Mustapha Nourelfath. (2019) Integrated Workforce Training and Operations Planning for Maintenance Service Providers. IFAC-PapersOnLine 52:13, pages 613-618.
Crossref
Crossref
Yaileen M. Méndez-Vázquez & David A. Nembhard. (2019) Worker-cell assignment: The impact of organizational factors on performance in cellular manufacturing systems. Computers & Industrial Engineering 127, pages 1101-1114.
Crossref
Crossref
Lang Wu, Fulin Cai, Li Li & Xianghua Chu. (2018) Cross-Trained Worker Assignment Problem in Cellular Manufacturing System Using Swarm Intelligence Metaheuristics. Mathematical Problems in Engineering 2018, pages 1-15.
Crossref
Crossref
Adil Baykasoğlu, Şeyda Topaloğlu & Filiz Şenyüzlüler. (2017) Manufacturing cell formation with flexible processing capabilities and worker assignment: Comparison of constraint programming and integer programming approaches. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:11, pages 2054-2068.
Crossref
Crossref
Omid Arghish, Reza Tavakkoli-Moghaddam, Ali Shahandeh-Nookabadi & Javad Rezaeian. (2018) An integrated cellular manufacturing system with type-2 fuzzy variables: Three tuned meta-heuristic algorithms. Journal of Intelligent & Fuzzy Systems 35:2, pages 2293-2308.
Crossref
Crossref
Zhaojing Wang, Hao Hu & Jie Gong. (2018) Competence Based Worker Assignment and Impacts on Production Scheduling in Precast Construction. Competence Based Worker Assignment and Impacts on Production Scheduling in Precast Construction.
Jie Lian, ChenGuang Liu, WenJuan Li & Yong Yin. (2018) A multi-skilled worker assignment problem in seru production systems considering the worker heterogeneity. Computers & Industrial Engineering 118, pages 366-382.
Crossref
Crossref
Ömer Faruk Yılmaz & Mehmet Bülent Durmuşoğlu. 2018. Handbook of Research on Applied Optimization Methodologies in Manufacturing Systems. Handbook of Research on Applied Optimization Methodologies in Manufacturing Systems
125
161
.
Matjaz Roblek, Maja Zajec & Benjamin Urh. 2017. Knowledge Management Strategies and Applications. Knowledge Management Strategies and Applications.
Jun Zhang & Binghai Zhou. (2017) Design an incremental cell formation problem considering human factor. Design an incremental cell formation problem considering human factor.
Gregory T. Purdy, Jaime A. Camelio, Kimberly P. Ellis & Jean Peccoud. (2017) Opportunities to apply manufacturing systems analysis techniques in genetic manufacturing systems. Manufacturing Letters 13, pages 34-38.
Crossref
Crossref
Hanxin Feng, Wen Da, Lifeng Xi, Ershun Pan & Tangbin Xia. (2017) Solving the integrated cell formation and worker assignment problem using particle swarm optimization and linear programming. Computers & Industrial Engineering 110, pages 126-137.
Crossref
Crossref
Sana Bouajaja & Najoua Dridi. (2016) A survey on human resource allocation problem and its applications. Operational Research 17:2, pages 339-369.
Crossref
Crossref
Chunfeng Liu, Jufeng Wang & Joseph Y.-T. Leung. (2016) Worker assignment and production planning with learning and forgetting in manufacturing cells by hybrid bacteria foraging algorithm. Computers & Industrial Engineering 96, pages 162-179.
Crossref
Crossref
Esmaeil Mehdizadeh & Vahid Rahimi. (2016) An integrated mathematical model for solving dynamic cell formation problem considering operator assignment and inter/intra cell layouts. Applied Soft Computing 42, pages 325-341.
Crossref
Crossref
Omer Faruk Yilmaz & Hikmet Erbiyik. 2016. Comparative Economics and Regional Development in Turkey. Comparative Economics and Regional Development in Turkey
319
335
.
Sayyed Shoaib-ul-Hasan, Marco Macchi & Alessandro Pozzetti. 2016. Advances in Production Management Systems. Initiatives for a Sustainable World. Advances in Production Management Systems. Initiatives for a Sustainable World
154
161
.
Xiaodong Zhang, Junjiang Qiu, Dongfang Zhao & Christopher M. Schlick. (2015) A Human-Oriented Simulation Approach for Labor Assignment Flexibility in Changeover Processes of Manufacturing Cells. Human Factors and Ergonomics in Manufacturing & Service Industries 25:6, pages 740-757.
Crossref
Crossref
Bo Xin, Yuan Li, Jianfeng Yu & Jie Zhang. (2015) An adaptive BPSO algorithm for multi-skilled workers assignment problem in aircraft assembly lines. Assembly Automation 35:4, pages 317-328.
Crossref
Crossref
Gang Li, Joy M. Field, Hongxun Jiang, Tian He & Youming Pang. (2015) Decision Models for Workforce and Technology Planning in Services. Service Science 7:1, pages 29-47.
Crossref
Crossref
David A. Nembhard & Frank Bentefouet. (2015) Selection, grouping, and assignment policies with learning-by-doing and knowledge transfer. Computers & Industrial Engineering 79, pages 175-187.
Crossref
Crossref
Gokhan Egilmez, Bulent Erenay & Gürsel A. Süer. (2014) Stochastic skill-based manpower allocation in a cellular manufacturing system. Journal of Manufacturing Systems 33:4, pages 578-588.
Crossref
Crossref
Francois Marmier, Naoufel Cheikhrouhou & Didier Gourc. (2014) Improvement of the planning reliability by the integration of human skills in project risk management. Improvement of the planning reliability by the integration of human skills in project risk management.
Emre Cevikcan. (2014) A mathematical programming approach for walking-worker assembly systems. Assembly Automation 34:1, pages 56-68.
Crossref
Crossref
A. Costa, F. A. Cappadonna & S. Fichera. (2013) A hybrid genetic algorithm for job sequencing and worker allocation in parallel unrelated machines with sequence-dependent setup times. The International Journal of Advanced Manufacturing Technology 69:9-12, pages 2799-2817.
Crossref
Crossref
ChenGuang Liu, Na Yang, WenJuan Li, Jie Lian, Steve Evans & Yong Yin. (2013) Training and assignment of multi-skilled workers for implementing seru production systems. The International Journal of Advanced Manufacturing Technology 69:5-8, pages 937-959.
Crossref
Crossref
Adedeji BadiruDavid Nembhard & Bryan Norman. 2013. Handbook of Industrial and Systems Engineering, Second Edition. Handbook of Industrial and Systems Engineering, Second Edition
567
582
.
Chase C. Murray & Woojin Park. (2013) Incorporating Human Factor Considerations in Unmanned Aerial Vehicle Routing. IEEE Transactions on Systems, Man, and Cybernetics: Systems 43:4, pages 860-874.
Crossref
Crossref
Frank Bentefouet & David A. Nembhard. (2013) Optimal flow-line conditions with worker variability. International Journal of Production Economics 141:2, pages 675-684.
Crossref
Crossref
F.A. Cappadonna, A. Costa & S. Fichera. (2013) Makespan Minimization of Unrelated Parallel Machines with Limited Human Resources. Procedia CIRP 12, pages 450-455.
Crossref
Crossref
Mohammed Othman, Nadia Bhuiyan & Gerard J. Gouw. (2012) Integrating workers’ differences into workforce planning. Computers & Industrial Engineering 63:4, pages 1096-1106.
Crossref
Crossref
David A. Nembhard & Frank Bentefouet. (2012) Parallel system scheduling with general worker learning and forgetting. International Journal of Production Economics 139:2, pages 533-542.
Crossref
Crossref
Xiang Zhang & Jun Xu. (2012) Cost optimization of heterogeneous auditors allocation in certification body. Cost optimization of heterogeneous auditors allocation in certification body.
Maryam Hamedi, G.R. Esmaeilian, N. Ismail & M.K.A. Ariffin. (2012) Capability-based virtual cellular manufacturing systems formation in dual-resource constrained settings using Tabu Search. Computers & Industrial Engineering 62:4, pages 953-971.
Crossref
Crossref
Suksan Prombanpong & Waraporn Seenpipat. (2011) A worker assignment for machine cluster in the manufacturing cell. A worker assignment for machine cluster in the manufacturing cell.
J. Xu, X. Xu & S.Q. Xie. (2011) Recent developments in Dual Resource Constrained (DRC) system research. European Journal of Operational Research 215:2, pages 309-318.
Crossref
Crossref
Hassan Rezazadeh, Reza Mahini & Mahdi Zarei. (2011) Solving a dynamic virtual cell formation problem by linear programming embedded particle swarm optimization algorithm. Applied Soft Computing 11:3, pages 3160-3169.
Crossref
Crossref
J. Xu, X. Xu & S. Q. Xie. (2011) A New System for Resource Capability Evaluation. A New System for Resource Capability Evaluation.
J. Xu, X. Xu & S. Q. Xie. (2010) An integrated dual resource management and production planning system. An integrated dual resource management and production planning system.
Yan Jin, Margaret M. Hopkins & Jenell L. S. Wittmer. (2010) Linking human capital to competitive advantages: Flexibility in a manufacturing firm's supply chain. Human Resource Management 49:5, pages 939-963.
Crossref
Crossref
Iraj Mahdavi, Amin Aalaei, Mohammad Mahdi Paydar & Maghsud Solimanpur. (2010) Designing a mathematical model for dynamic cellular manufacturing systems considering production planning and worker assignment. Computers & Mathematics with Applications 60:4, pages 1014-1025.
Crossref
Crossref
I. Chaieb Memmi & B. Abbassi. (2010) A multi-criteria approach for a tasks allocation problem with consideration of equity between operators. IFAC Proceedings Volumes 43:17, pages 1-8.
Crossref
Crossref
Nader Azizi, Saeed Zolfaghari & Ming Liang. (2010) Modeling job rotation in manufacturing systems: The study of employee's boredom and skill variations. International Journal of Production Economics 123:1, pages 69-85.
Crossref
Crossref
M. B. Aryanezhad, V. Deljoo & S. M. J. Mirzapour Al-e-hashem. (2008) Dynamic cell formation and the worker assignment problem: a new model. The International Journal of Advanced Manufacturing Technology 41:3-4, pages 329-342.
Crossref
Crossref
John W. Fowler, Pornsarun Wirojanagud & Esma S. Gel. (2008) Heuristics for workforce planning with worker differences. European Journal of Operational Research 190:3, pages 724-740.
Crossref
Crossref
Satya S. Chakravorty & Douglas N. Hales. (2008) The evolution of manufacturing cells: An action research study. European Journal of Operational Research 188:1, pages 153-168.
Crossref
Crossref
Kym Fraser, Howard Harris & Lee Luong. (2007) Team‐based cellular manufacturing. Journal of Manufacturing Technology Management 18:6, pages 714-730.
Crossref
Crossref
Jos Bokhorst & Jannes Slomp. 2007. Workforce Cross Training. Workforce Cross Training
3
63
.
Atthawit Techawiboonwong, Pisal Yenradee & Sanchoy K. Das. (2006) A master scheduling model with skilled and unskilled temporary workers. International Journal of Production Economics 103:2, pages 798-809.
Crossref
Crossref
Emmett J. LodreeJr.Jr. & Bryan A. Norman. 2006. Handbook of Production Scheduling. Handbook of Production Scheduling
287
313
.
David Nembhard & Bryan Norman. 2005. Handbook of Industrial and Systems Engineering. Handbook of Industrial and Systems Engineering
16-1
16-13
.
Jannes Slomp, Jos A.C. Bokhorst & Eric Molleman. (2005) Cross-training in a cellular manufacturing environment. Computers & Industrial Engineering 48:3, pages 609-624.
Crossref
Crossref
Tuan-anh Tran, Tamas Ruppert, György Eigner & János Abonyi. (2022) Assessing Human Worker Performance by Pattern Mining of Kinect Sensor Skeleton Data. SSRN Electronic Journal.
Crossref
Crossref