Advanced search
Publication Cover
International Journal of Production Research Volume 49, 2011 - Issue 7
Submit an article Journal homepage
507
Views
17
CrossRef citations to date
0
Altmetric
Review Article

Genetic algorithm based deformation control and clamping force optimisation of workpiece fixture system

K. Siva Kumar Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam 638401, India
&
G. Paulraj Department of Production Engineering, J.J. College of Engineering and Technology, Tiruchirappalli 620009, IndiaCorrespondence[email protected]
Pages 1903-1935 | Received 15 May 2009, Accepted 19 Nov 2009, Published online: 13 Apr 2010

Citations (17)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (5)

Arsalan Fazil, Zeshan Ahmad, Khazar Hayat, Tipu Sultan, Muhammad Ali Ijaz Malik, Shayan Sohail, Muhammad Asad & Faramarz Djavanroodi. (2023) An experimental and numerical study on optimization of number and position of the clamps in sheet metals fixture. Mechanics of Advanced Materials and Structures 0:0, pages 1-11.
Read now
Xiaoyue Li, Yinfei Yang, Liang Li, Yaowen Shi, Guolong Zhao, Ning He, Ning Qian & Zhuang Mu. (2021) An approach for optimising the fixturing configuration in flexible machining fixtures. International Journal of Production Research 59:20, pages 6223-6240.
Read now
O.J. Bakker, T.N. Papastathis, A.A. Popov & S.M. Ratchev. (2013) Active fixturing: literature review and future research directions. International Journal of Production Research 51:11, pages 3171-3190.
Read now
Jianping Dou, Xingsong Wang & Lei Wang. (2012) Machining fixture layout optimisation under dynamic conditions based on evolutionary techniques. International Journal of Production Research 50:15, pages 4294-4315.
Read now
K. Siva Kumar & G. Paulraj. (2012) Geometric error control of workpiece during drilling through optimisation of fixture parameter using a genetic algorithm. International Journal of Production Research 50:12, pages 3450-3469.
Read now

Articles from other publishers (12)

Changhui Liu, Jing Wang, Binghai Zhou, Jianbo Yu, Ying Zheng & Jianfeng Liu. (2024) Development of Fixture Layout Optimization for Thin-Walled Parts: A Review. Chinese Journal of Mechanical Engineering 37:1.
Crossref
Haibo Liu, Chengxin Wang, Te Li, Qile Bo, Kuo Liu & Yongqing Wang. (2023) Fixturing technology and system for thin-walled parts machining: a review. Frontiers of Mechanical Engineering 17:4.
Crossref
Maria Aurrekoetxea, Iñigo Llanos, Oier Zelaieta & Luis Norberto López de Lacalle. (2022) Towards advanced prediction and control of machining distortion: a comprehensive review. The International Journal of Advanced Manufacturing Technology 122:7-8, pages 2823-2848.
Crossref
Ze Liu & Yu Sun. (2022) Fixture layout optimization for car dashboard based on N - X locating principle . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 236:9, pages 1282-1292.
Crossref
Guojun Luo, Xiaohui Wang & Xianguo Yan. (2021) Geometric Theorems and Application of the DOF Analysis of the Workpiece Based on the Constraint Normal Line. Advances in Materials Science and Engineering 2021, pages 1-9.
Crossref
MuBang Xiao, Ye Ding, Zaojun Fang & Guilin Yang. (2020) Contact force modeling and analysis for robotic tilted-disc polishing of freeform workpieces. Precision Engineering 66, pages 188-200.
Crossref
Xining LI & Zhihao ZHAO. (2020) Location layout design of aircraft parts assembly based on MSVR. Chinese Journal of Aeronautics 33:5, pages 1532-1540.
Crossref
Hossein Hajimiri, Vahid Abedini, Mohsen Shakeri & Mohammad Hassan Siahmargoei. (2018) Simultaneous fixturing layout and sequence optimization based on genetic algorithm and finite element method. The International Journal of Advanced Manufacturing Technology 97:9-12, pages 3191-3204.
Crossref
Haibo Liu, Qi Luo, Jianxiong Wu, Te Li & Y.-Q. Wang. (2018) Performance analysis of MRF-based flexible supporting of thin-walled part. Performance analysis of MRF-based flexible supporting of thin-walled part.
Yu. I. Myasnikov & D. Yu. Pimenov. (2016) Systems approach to the design of technological equipment for metal-cutting machines. Russian Engineering Research 36:11, pages 951-955.
Crossref
Fei Tao, Lin Zhang & Yuanjun LailiFei Tao, Yuanjun Laili & Lin Zhang. 2015. Configurable Intelligent Optimization Algorithm. Configurable Intelligent Optimization Algorithm 35 80 .
K. A. Sundararaman, S. Guharaja, K. P. Padmanaban & M. Sabareeswaran. (2014) Design and optimization of machining fixture layout for end-milling operation. The International Journal of Advanced Manufacturing Technology 73:5-8, pages 669-679.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.