Citations (20)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
Mikael Rosenqvist, Lars Lindkvist, Kristina Wärmefjord & Rikard Söderberg. (2024) Simulation of variation for manual assembly when mis-constraining occurs. Journal of Engineering Design 35:1, pages 54-88.
Read now
Read now
O.J. Bakker, T.N. Papastathis, A.A. Popov & S.M. Ratchev. (2013) Active fixturing: literature review and future research directions. International Journal of Production Research 51:11, pages 3171-3190.
Read now
Read now
Sun Jin, Yinhua Liu & Zhongqin Lin. (2012) A Bayesian network approach for fixture fault diagnosis in launch of the assembly process. International Journal of Production Research 50:23, pages 6655-6666.
Read now
Read now
Ge Hong, Shuo Gao, Tangbin Xia, Juan Du, Xuancheng Jin, Ershun Pan & Lifeng Xi. Fixture layout optimization of large compliant ship part assembly for reducing and straightening butt clearance. Engineering Optimization 0:0, pages 1-20.
Read now
Read now
Articles from other publishers (16)
Changhui Liu, Jing Wang, Binghai Zhou, Jianbo Yu, Ying Zheng & Jianfeng Liu. (2024) Development of Fixture Layout Optimization for Thin-Walled Parts: A Review. Chinese Journal of Mechanical Engineering 37:1.
Crossref
Crossref
Chenxi Zhu, Xiao-Jin Wan & Zhengjie Zhou. (2023) Grasping point optimization for sheet metal part based on GSA-Kriging model in a multi-robot assembly system. The International Journal of Advanced Manufacturing Technology 125:5-6, pages 2225-2242.
Crossref
Crossref
Zhuhua Ai, Li Sun, Honggen Zhou, Chunjin Li, Xiaoxiang Bai, Guochao Li, Zhancheng Xie & Feng Feng. (2022) Influence of clamping errors on the machining deformation of diesel body under multi-stress field coupling condition. The International Journal of Advanced Manufacturing Technology 124:11-12, pages 4075-4097.
Crossref
Crossref
M. Ramesh, K. A. Sundararaman, M. Sabareeswaran & R. Srinivasan. (2022) Development of Hybrid Artificial Neural Network–Particle Swarm Optimization Model and Comparison of Genetic and Particle Swarm Algorithms for Optimization of Machining Fixture Layout. International Journal of Precision Engineering and Manufacturing 23:12, pages 1411-1430.
Crossref
Crossref
Benchi Zhu, Zhuang Mu, Wenbo He, Longxin Fan, Guolong Zhao & Yinfei Yang. (2022) Research on Clamping Action Control Technology for Floating Fixtures. Materials 15:16, pages 5571.
Crossref
Crossref
F Michael Thomas Rex, P Hariharasakthisudhan, A Andrews & B Prince Abraham. (2021) Optimization of flexible fixture layout to improve form quality using parametric finite element model and mixed discrete-integer genetic algorithm. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:1, pages 16-29.
Crossref
Crossref
Ying Liu, Yuwen Li & Xin Wen. (2018) Modeling for Locating Pin Adjustment on Fixtures to Improve Positioning Accuracy of Parts. Modeling for Locating Pin Adjustment on Fixtures to Improve Positioning Accuracy of Parts.
M Sabareeswaran, KP Padmanaban & KA Sundararaman. (2017) Comparison of evolutionary techniques for the optimization of machining fixture layout under dynamic conditions. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 232:12, pages 2145-2158.
Crossref
Crossref
S. Khodaygan. (2017) A method for optimal reduction of locating error with the minimum adjustments of locators based on the geometric capability ratio of process. The International Journal of Advanced Manufacturing Technology 94:9-12, pages 3963-3978.
Crossref
Crossref
Fei Tao, Lin Zhang & Yuanjun LailiFei Tao, Yuanjun Laili & Lin Zhang. 2015. Configurable Intelligent Optimization Algorithm. Configurable Intelligent Optimization Algorithm
35
80
.
K. Siva Kumar & G. Paulraj. (2012) Analysis and optimization of fixture under dynamic machining condition with chip removal effect. Journal of Intelligent Manufacturing 25:1, pages 85-98.
Crossref
Crossref
Branko Tadic, Djordje Vukelic, Dragomir Miljanic, Bojan Bogdanovic, Ivan Macuzic, Igor Budak & Petar Todorovic. (2014) Model testing of fixture–workpiece interface compliance in dynamic conditions. Journal of Manufacturing Systems 33:1, pages 76-83.
Crossref
Crossref
Branko Tadic, Bojan Bogdanovic, Branislav M. Jeremic, Petar M. Todorovic, Ognjan Luzanin, Igor Budak & Djordje Vukelic. (2013) Locating and clamping of complex geometry workpieces with skewed holes in multiple-constraint conditions. Assembly Automation 33:4, pages 386-400.
Crossref
Crossref
S Vishnupriyan, A Muruganandam & L Govindarajan. (2012) Prediction of workpiece dynamic motion using an optimized artificial neural network. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226:10, pages 1705-1716.
Crossref
Crossref
Branko Tadic, Branislav Jeremic, Petar Todorovic, Djordje Vukelic, Uros Proso, Vesna Mandic & Igor Budak. (2012) Efficient workpiece clamping by indenting cone-shaped elements. International Journal of Precision Engineering and Manufacturing 13:10, pages 1725-1735.
Crossref
Crossref
S. Vishnupriyan. (2012) Effect of system compliance and workpiece dynamics on machining error. Assembly Automation 32:2, pages 175-184.
Crossref
Crossref