Shanmuganantham Raja & Krishnan Vignesh. (2023) A new approach for determining optimum number of cell, cell formation and intra-machine cell layout with considering operation sequence. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Manash Hazarika. (2022) An improved genetic algorithm for the machine-part cell formation problem. International Journal of System Assurance Engineering and Management 14:1, pages 206-219.
Crossref
Hatice GÜNER & Ali Rıza GÜNER. (2022) BİR TEKSTİL ATÖLYESİNDE HÜCRESEL İMALATA GEÇİŞ UYGULAMASI. Uludağ University Journal of The Faculty of Engineering, pages 453-466.
Crossref
Alireza Goli, Erfan Babaee Tirkolaee & Nadi Serhan Aydin. (2021) Fuzzy Integrated Cell Formation and Production Scheduling Considering Automated Guided Vehicles and Human Factors. IEEE Transactions on Fuzzy Systems 29:12, pages 3686-3695.
Crossref
Bahman Esmailnezhad & Mohammad Saidi-mehrabad. (2021) Making an integrated decision in a three-stage supply chain along with cellular manufacturing under uncertain environments: A queueing-based analysis. RAIRO - Operations Research 55:6, pages 3575-3602.
Crossref
Saeed Dehnavi-Arani, Ahmad Sadegheih, Yahia Zare Mehrjerdi & Mahboobeh Honarvar. (2020) A new bi-objective integrated dynamic cell formation and AGVs’ dwell point location problem on the inter-cell unidirectional single loop. Soft Computing 24:21, pages 16021-16042.
Crossref
Madhu Sudana Rao Nalluri, K. Kannan, Xiao-Zhi Gao & Diptendu Sinha Roy. (2019) An efficient hybrid meta-heuristic approach for cell formation problem. Soft Computing 23:19, pages 9189-9213.
Crossref
Frank Lefley. (2018) What is Our Perception of Project Risk, and do the Current Theories Truly Reflect Our Pragmatic Interpretation of This Perception?. IEEE Engineering Management Review 46:2, pages 65-73.
Crossref
Yong Yin, Kathryn E. Stecke, Morgan Swink & Ikou Kaku. (2017)
Lessons from
seru
production on manufacturing competitively in a high cost environment
. Journal of Operations Management 49-51:1, pages 67-76.
Crossref
Oliver R. Ilić. (2012) An e-Learning tool considering similarity measures for manufacturing cell formation. Journal of Intelligent Manufacturing 25:3, pages 617-628.
Crossref
Nirghar Roy & Ali Mostafaeipour. (2014) A new linguistic based algorithm for creating manufacturing cell. International Journal on Interactive Design and Manufacturing (IJIDeM) 8:2, pages 133-138.
Crossref
YONG YIN, CHEN GUANG LIU & IKOU KAKU. (2014) SOME UNDERLYING MATHEMATICAL DEFINITIONS AND PRINCIPLES FOR CELLULAR MANUFACTURING. Asia-Pacific Journal of Operational Research 31:01, pages 1450008.
Crossref
P K ARORA, A HALEEM & M K SINGH. (2013) Recent development of cellular manufacturing systems. Sadhana 38:3, pages 421-428.
Crossref
Ali Kamrani, Maryam Azimi & Abdulrahman Al-AhmariYaowu Zhang. 2013. Methods in Product Design. Methods in Product Design
27
52
.
Manojit Chattopadhyay, Pranab K. Dan & Sitanath Mazumdar. (2012) Application of visual clustering properties of self organizing map in machine–part cell formation. Applied Soft Computing 12:2, pages 600-610.
Crossref
M. Muthukumaran & S. Muthu. (2015) A Heuristic Scheduling Algorithm for Minimizing Makespan and Idle Time in a Nagare Cell. Advances in Mechanical Engineering 4, pages 895463.
Crossref
S. Karthikeyan, M. Saravanan & K. Ganesh. (2012) GT Machine Cell Formation Problem in Scheduling for Cellular Manufacturing System Using Meta-Heuristic Method. Procedia Engineering 38, pages 2537-2547.
Crossref
Chia-Ching Lin, Chin-Chih Chang & Feng-Chia Li. (2011) An efficient tabu search approach to determine cell formation problem with consideration of cell layout. An efficient tabu search approach to determine cell formation problem with consideration of cell layout.
Jamal Arkat, Leila Hosseini & Mehdi Hosseinabadi Farahani. (2011) Minimization of exceptional elements and voids in the cell formation problem using a multi-objective genetic algorithm. Expert Systems with Applications 38:8, pages 9597-9602.
Crossref
Shu-Hsing Chung, Tai-Hsi Wu & Chin-Chih Chang. (2011) An efficient tabu search algorithm to the cell formation problem with alternative routings and machine reliability considerations. Computers & Industrial Engineering 60:1, pages 7-15.
Crossref
Khoa Trinh, Jacques Ferland & Tien Dinh. 2012. Advanced Intelligent Computing. Advanced Intelligent Computing
162
169
.
Yong Yin, Ikou Kaku, Jiafu Tang & JianMing ZhuYong Yin, Ikou Kaku, Jiafu Tang & JianMing Zhu. 2011. Data Mining. Data Mining
157
205
.
Mohammad Mahdi Paydar, Iraj Mahdavi, Iman Sharafuddin & Maghsud Solimanpur. (2010) Applying simulated annealing for designing cellular manufacturing systems using MDmTSP. Computers & Industrial Engineering 59:4, pages 929-936.
Crossref
Terushige Honiden & Shinji Shimizu. (2010) An integrated design method for machine and assembly cell formation. An integrated design method for machine and assembly cell formation.
Azadeh Noktehdan, Behrooz Karimi & Ali Husseinzadeh Kashan. (2010) A differential evolution algorithm for the manufacturing cell formation problem using group based operators. Expert Systems with Applications 37:7, pages 4822-4829.
Crossref
Bao Jiahan, Wang Feng, Wang Lu & Xie Nenggang. (2010) Ant colony optimization with an application in Cellular Manufacturing. Ant colony optimization with an application in Cellular Manufacturing.
Saadettin Erhan Kesen, Sanchoy K. Das & Zülal Güngör. (2010) A genetic algorithm based heuristic for scheduling of virtual manufacturing cells (VMCs). Computers & Operations Research 37:6, pages 1148-1156.
Crossref
Saadettin Erhan Kesen, Sanchoy K. Das & Zulal Gungor. (2009) A mixed integer programming formulation for scheduling of virtual manufacturing cells (VMCs). The International Journal of Advanced Manufacturing Technology 47:5-8, pages 665-678.
Crossref
Chin-Chih Chang. (2010) Development of a Web-Based Decision Support System for Cell Formation Problems Considering Alternative Process Routings and Machine Sequences. Journal of Software Engineering and Applications 03:02, pages 160-166.
Crossref
Innar Liiv. (2010) Seriation and matrix reordering methods: An historical overview. Statistical Analysis and Data Mining, pages n/a-n/a.
Crossref
Chin-Chih Chang, Tai-Hsi Wu & Shu-Hsing Chung. (2009) A Novel Approach for Cell Formation and Cell Layout Design in Cellular Manufacturing System. A Novel Approach for Cell Formation and Cell Layout Design in Cellular Manufacturing System.
Sani Susanto, David Al-Dabass & Arijit Bhattacharya. (2009) Optimised Cell Formation Algorithm Considering Sequence of Operations, Alternative Routing and Part-Volume. Optimised Cell Formation Algorithm Considering Sequence of Operations, Alternative Routing and Part-Volume.
K. Spiliopoulos & S. Sofianopoulou. (2006) An efficient ant colony optimization system for the manufacturing cells formation problem. The International Journal of Advanced Manufacturing Technology 36:5-6, pages 589-597.
Crossref
Atul Agarwal. (2008) Partitioning bottleneck work center for cellular manufacturing: An integrated performance and cost model. International Journal of Production Economics 111:2, pages 635-647.
Crossref
Nai-Chieh Wei & Olugbenga O. Mejabi. (2007) A clustering approach for minimizing intercell trips in cell formation. Journal of Intelligent Manufacturing 19:1, pages 13-20.
Crossref
Ibrahim H. Garbie, Hamid R. Parsaei & Herman R. Leep. 2008. Collaborative Engineering. Collaborative Engineering
249
281
.
M. Murugan & V. Selladurai. (2006) Optimization and implementation of cellular manufacturing system in a pump industry using three cell formation algorithms. The International Journal of Advanced Manufacturing Technology 35:1-2, pages 135-149.
Crossref
Innar Liiv. (2007) Visualization and data mining method for inventory classification. Visualization and data mining method for inventory classification.
Kym Fraser, Howard Harris & Lee Luong. (2007) Team‐based cellular manufacturing. Journal of Manufacturing Technology Management 18:6, pages 714-730.
Crossref
Tabitha L. James, Evelyn C. Brown & Kellie B. Keeling. (2007) A hybrid grouping genetic algorithm for the cell formation problem. Computers & Operations Research 34:7, pages 2059-2079.
Crossref
Chang-Chun Tsai & Chung-ying Lee. (2006) Optimization of manufacturing cell formation with a multi-functional mathematical programming model. The International Journal of Advanced Manufacturing Technology 30:3-4, pages 309-318.
Crossref
Yong Yin & Kazuhiko Yasuda. (2006) Similarity coefficient methods applied to the cell formation problem: A taxonomy and review. International Journal of Production Economics 101:2, pages 329-352.
Crossref
L.R. Foulds, A.P. French & J.M. Wilson. (2006) The sustainable cell formation problem: manufacturing cell creation with machine modification costs. Computers & Operations Research 33:4, pages 1010-1032.
Crossref
Gurkan Ozturk, Zehra Kamisli Ozturk & A. Attila Islier. 2006. Advances in Natural Computation. Advances in Natural Computation
575
583
.
Poornachandra Rao Panchalavarapu & Vira Chankong. (2005) Design of cellular manufacturing systems with assembly considerations. Computers & Industrial Engineering 48:3, pages 449-469.
Crossref
Bopaya Bidanda, Poonsiri Ariyawongrat, Kim LaScola Needy, Bryan A. Norman & Wipawee Tharmmaphornphilas. (2005) Human related issues in manufacturing cell design, implementation, and operation: a review and survey. Computers & Industrial Engineering 48:3, pages 507-523.
Crossref
Danny J. Johnson & Urban Wemmerlöv. (2009) Why Does Cell Implementation Stop? Factors Influencing Cell Penetration in Manufacturing Plants. Production and Operations Management 13:3, pages 272-289.
Crossref
L.R. Foulds & K. Neumann. (2003) A network flow model of group technology. Mathematical and Computer Modelling 38:5-6, pages 623-635.
Crossref
Jun Wang. (2003) Formation of machine cells and part families in cellular manufacturing systems using a linear assignment algorithm. Automatica 39:9, pages 1607-1615.
Crossref
Fahad Al‐Mubarak, Basheer M. Khumawala & Cem Canel. (2003) Focused cellular manufacturing: an alternative to cellular manufacturing. International Journal of Operations & Production Management 23:3, pages 277-299.
Crossref
Fahad Al-Mubarak, Cem Canel & Basheer M Khumawala. (2003) A simulation study of focused cellular manufacturing as an alternative batch-processing layout. International Journal of Production Economics 83:2, pages 123-138.
Crossref
K. S. Park & S. W. Han. (2001) Performance obstacles in cellular manufacturing implementation— empirical investigation. Human Factors and Ergonomics in Manufacturing & Service Industries 12:1, pages 17-29.
Crossref
Charlene A Yauch & Harold J Steudel. (2002) Cellular manufacturing for small businesses: key cultural factors that impact the conversion process. Journal of Operations Management 20:5, pages 593-617.
Crossref
Hemant V. Kher & John B. Jensen. (2007) Shop Performance Implications of Using Cells, Partial Cells, and Remainder Cells*. Decision Sciences 33:2, pages 161-190.
Crossref
Arlyn J. Melcher, Moutaz Khouja & David E. Booth. (2002) Toward a production classification system. Business Process Management Journal 8:1, pages 53-79.
Crossref
Shine-Der Lee & Chih-Ping Chiang. (2002) Cell formations in the uni-directional loop material handling environment. European Journal of Operational Research 137:2, pages 401-420.
Crossref
A.Claudio Garavelli. (2001) Performance analysis of a batch production system with limited flexibility. International Journal of Production Economics 69:1, pages 39-48.
Crossref
Russell D. Meller & Richard L. Deshazo. (2001) Manufacturing system design case study: Multi-Channel Manufacturing at Electrical Box & Enclosures. Journal of Manufacturing Systems 20:6, pages 445-456.
Crossref
Victor L. Berardi, Guoqiang Zhang & O. Felix Offodile. (1999) A mathematical programming approach to evaluating alternative machine clusters in cellular manufacturing. International Journal of Production Economics 58:3, pages 253-264.
Crossref
Vito Albino & A.Claudio Garavelli. (1998) Some effects of flexibility and dependability on cellular manufacturing system performance. Computers & Industrial Engineering 35:3-4, pages 491-494.
Crossref
Giuseppe Bonazzi. (2016) Between Shock Absorption and Continuous Improvement: Supervisors and Technicians in Fiat `Integrated Factory'. Work, Employment and Society 12:2, pages 219-243.
Crossref
Qidong Cao & Mark A. McKnew. (1998) Partial termination rule of Lagrangian relaxation for manufacturing cell formation problems. Computers & Operations Research 25:2, pages 159-168.
Crossref
Atul Agarwal & Joseph Sarkis. (1998) A review and analysis of comparative performance studies on functional and cellular manufacturing layouts. Computers & Industrial Engineering 34:1, pages 77-89.
Crossref
R. Badham, I. P. McLoughlin & D. A. Buchanan. 1998. Group Technology and Cellular Manufacturing. Group Technology and Cellular Manufacturing
401
422
.
D. C. Steele. 1998. Group Technology and Cellular Manufacturing. Group Technology and Cellular Manufacturing
309
320
.
N. C. Suresh & J. M. Kay. 1998. Group Technology and Cellular Manufacturing. Group Technology and Cellular Manufacturing
1
14
.
Robert F. Marsh, Jack R. Meredith & David M. McCutcheon. (1997) The life cycle of manufacturing cells. International Journal of Operations & Production Management 17:12, pages 1167-1182.
Crossref
Giuseppe Bonazzi. (1997) Tra tamponamento delle emergenze e miglioramento continuo: capi UTE e tecnologi nella «fabbrica integrata». Quaderni di Sociologia:15, pages 117-137.
Crossref
Angel A. Cedeño & Gürsel A. Süer. (1997) The use of a similarity coefficient-based method to perform clustering analysis to a large set of data with dissimilar parts. Computers & Industrial Engineering 33:1-2, pages 225-228.
Crossref
Chao-Hsien Chu. (1997) An improved neural network for manufacturing cell formation. Decision Support Systems 20:4, pages 279-295.
Crossref
Shimon Y. Nof, Wilbert E. Wilhelm & Hans-Jürgen WarneckeShimon Y. Nof, Wilbert E. Wilhelm & Hans-Jürgen Warnecke. 1997. Industrial Assembly. Industrial Assembly
259
311
.
Danny J. Johnson & Urban Wemmerlöv. (2009) ON THE RELATIVE PERFORMANCE OF FUNCTIONAL AND CELLULAR LAYOUTS‐ AN ANALYSIS OF THE MODEL‐BASED COMPARATIVE STUDIES LITERATURE. Production and Operations Management 5:4, pages 309-334.
Crossref
Hark Hwang & Paek Ree. (1996) Routes selection for the cell formation problem with alternative part process plans. Computers & Industrial Engineering 30:3, pages 423-431.
Crossref
Vijay R. Kannan & Soumen Ghosh. (1996) Cellular manufacturing using virtual cells. International Journal of Operations & Production Management 16:5, pages 99-112.
Crossref
Russell D. Meller & Kai-Yin Gau. (1996) The facility layout problem: Recent and emerging trends and perspectives. Journal of Manufacturing Systems 15:5, pages 351-366.
Crossref
V.R. Kannan & S. Ghosh. (1995) Using dynamic cellular manufacturing to simplify scheduling in cell based production systems. Omega 23:4, pages 443-452.
Crossref
Yong‐Tae Park & Urban Wemmerlöv. (2007) A Comparative Study of Cell Formation Techniques: Experimental Findings on Data‐Dependency and Solution Quality. Decision Sciences 26:4, pages 475-502.
Crossref
S. Aggarwal. (1995) Emerging hard and soft technologies: current status, issues and implementation problems. Omega 23:3, pages 323-339.
Crossref
Mehdi Kaighobadi. (1995) Inventory issues in incremental FMS implementation. International Journal of Flexible Manufacturing Systems 7:2, pages 177-197.
Crossref
Mohsen M.D. Hassan. (1995) Layout design in group technology manufacturing. International Journal of Production Economics 38:2-3, pages 173-188.
Crossref
Kah-Fei Ho & K. Ridgway. (1995) A production planning and control system for cellular manufacture. A production planning and control system for cellular manufacture.
T. Park & H. Lee. 1995. Planning, Design, and Analysis of Cellular Manufacturing Systems. Planning, Design, and Analysis of Cellular Manufacturing Systems
181
202
.
A. Agarwal, F. Huq & J. Sarkis. 1995. Planning, Design, and Analysis of Cellular Manufacturing Systems. Planning, Design, and Analysis of Cellular Manufacturing Systems
167
180
.
D.F. Rogers & S.M. Shafer. 1995. Planning, Design, and Analysis of Cellular Manufacturing Systems. Planning, Design, and Analysis of Cellular Manufacturing Systems
147
165
.
L.L. Massay, C.O. Benjamin & Y. Omurtag. 1995. Planning, Design, and Analysis of Cellular Manufacturing Systems. Planning, Design, and Analysis of Cellular Manufacturing Systems
129
144
.
Chao-Hsien Chu. 1995. Planning, Design, and Analysis of Cellular Manufacturing Systems. Planning, Design, and Analysis of Cellular Manufacturing Systems
3
46
.
A. Gunasekaran, T. Martikainen & P. Yli-Olli. 1995. Flexible Manufacturing Systems: Recent Developments - Reference for Modern Instrumentation, Techniques, and Technology. Flexible Manufacturing Systems: Recent Developments - Reference for Modern Instrumentation, Techniques, and Technology
3
44
.
Jiaqin Yang & Richard H. Deane. (1994) Strategic Implications of Manufacturing Cell Formation Design. Integrated Manufacturing Systems 5:4/5, pages 87-96.
Crossref
Qidong Cao & Mark A. Mcknew. (1994) On modeling the design of cellular manufacturing systems. International Journal of Flexible Manufacturing Systems 6:2, pages 155-172.
Crossref
Ian Winfield. (1994) Toyota UK Ltd. Employee Relations 16:1, pages 41-53.
Crossref
O. Felix Offodile, Abraham Mehrez & John Grznar. (1994) Cellular manufacturing: A taxonomic review framework. Journal of Manufacturing Systems 13:3, pages 196-220.
Crossref
Sham Afzulpurkar, Faizul Huq & Mahesh Kurpad. (1993) An Alternative Framework for the Design and Implementation
of Cellular Manufacturing. International Journal of Operations & Production Management 13:9, pages 4-17.
Crossref
Shu-Chu Liu & Li Lin. (1993) Dynamic sequencing of robot moves in a manufacturing cell. European Journal of Operational Research 69:3, pages 482-497.
Crossref
S. Sankaran & R.G. Kasilingam. (1993) On cell size and machine requirements planning in group technology systems. European Journal of Operational Research 69:3, pages 373-383.
Crossref
Gajendra K. Adil, Divakar Rajamani & Doug Strong. (1993) A mathematical model for cell formation considering investment and operational costs. European Journal of Operational Research 69:3, pages 330-341.
Crossref
N. Singh. (1993) Design of cellular manufacturing systems: An invited review. European Journal of Operational Research 69:3, pages 284-291.
Crossref
Ali K. Kamrani, Hamid R. Parsaei & Mahfooz A. Chaudhry. (1993) A survey of design methods for manufacturing cells. Computers & Industrial Engineering 25:1-4, pages 487-490.
Crossref
A. Gunasekaran, S.K. Goyal, T. Martikainen & P. Yli-Olli. (1993) Modelling and analysis of just-in-time manufacturing systems. International Journal of Production Economics 32:1, pages 23-37.
Crossref
A.Z. Keller & A. Kazazi. (1993) ″Just‐in‐Time″ Manufacturing Systems: A Literature Review. Industrial Management & Data Systems 93:7, pages 2-32.
Crossref
Rasaratnam Logendran. (1993) A biary integer programming approach for simultaneous machine-part grouping in cellular manufacturing systems. Computers & Industrial Engineering 24:3, pages 329-336.
Crossref
A. Gunasekaran, T. Martikainen & P. Yli-Olli. (1993) Flexible manufacturing systems: An investigation for research and applications. European Journal of Operational Research 66:1, pages 1-26.
Crossref
Scott M. Shafer & Jack R. Meredith. (1993) An Empirically‐based Simulation Study of Functional versus
Cellular Layouts with Operations Overlapping. International Journal of Operations & Production Management 13:2, pages 47-62.
Crossref
Rasaratnam Logendran. (1993) Methodology for converting a functional manufacturing system into a cellular manufacturing system. International Journal of Production Economics 29:1, pages 27-41.
Crossref
T.-K. Hwang & P.B. Luh. 1993. Information Control Problems in Manufacturing Technology 1992. Information Control Problems in Manufacturing Technology 1992
61
66
.
Sankar Sengupta, Robert P. Davis & William G. Ferrell. (1993) Production planning and control in a JIT environment. Applied Mathematical Modelling 17:1, pages 41-46.
Crossref
O Felix Offodile. (1993) Machine grouping in cellular manufacturing. Omega 21:1, pages 35-52.
Crossref
P. A. Lewis & D. M. Love. 1993. Proceedings of the Thirtieth International MATADOR Conference. Proceedings of the Thirtieth International MATADOR Conference
435
442
.
Richard H. Deane & Jiaqin Yang. (1992) Product mix selection and closed manufacturing cell flow time performance. International Journal of Production Economics 28:2, pages 157-169.
Crossref
Kenneth R. Currie. (1992) An intelligent grouping algorithm for cellular manufacturing. Computers & Industrial Engineering 23:1-4, pages 109-112.
Crossref
Rasaratnam Logendran. (1992) Simultaneous machine-part grouping approach in manufacturing cells. Computers & Industrial Engineering 23:1-4, pages 77-80.
Crossref
N. Harvey. (1992) Automation and Restructuring: How Industrial Relations Affects Change in the Wisconsin Metal Working Industry. IFAC Proceedings Volumes 25:27, pages 27-33.
Crossref
T.-K. Hwang & P.B. Luh. (1992) Scheduling of a Flexible Manufacturing Cell. IFAC Proceedings Volumes 25:7, pages 61-66.
Crossref
P Kouvelis, W-C Chiang & AS Kiran. (1992) A survey of layout issues in flexible manufacturing systems. Omega 20:3, pages 375-390.
Crossref
JOHN A. BUZACOTT & J. GEORGE SHANTHIKUMAR. (2009) A GENERAL APPROACH FOR COORDINATING PRODUCTION IN MULTIPLE‐CELL MANUFACTURING SYSTEMS. Production and Operations Management 1:1, pages 34-52.
Crossref
E.G. John, H. Schäfer & A.R. Rowlands. (1992) Computer‐based Cell Formation Incorporating Process
Sequence. International Journal of Operations & Production Management 12:1, pages 60-65.
Crossref
Chun Zhang & Hsu-Pin (Ben) Wang. (1992) Concurrent formation of part families and machine cells based on the fuzzy set theory. Journal of Manufacturing Systems 11:1, pages 61-67.
Crossref
Ulrich HallwachsUlrich Hallwachs. 1992. EDV-gestützte Planungs- und Entscheidungshilfen zur Auslegung von Produktionsstrukturen mit strukturkostenoptimierten Dezentralen Verantwortungsbereichen. EDV-gestützte Planungs- und Entscheidungshilfen zur Auslegung von Produktionsstrukturen mit strukturkostenoptimierten Dezentralen Verantwortungsbereichen
163
176
.
Ismail N. Zahran, Adel S. Elmaghraby & Mohamed Adel Shalabi. 1992. Economics of Advanced Manufacturing Systems. Economics of Advanced Manufacturing Systems
73
90
.
Rasaratnam Logendran & Nudtapon Nudtasomboon. (1991) Minimizing the makespan of a group scheduling problem: a new heuristic. International Journal of Production Economics 22:3, pages 217-230.
Crossref
Patrick Dawson. (2007) From machine‐centered to human‐centered manufacture. International Journal of Human Factors in Manufacturing 1:4, pages 327-338.
Crossref
Kun‐Huang Yeh & Chao‐Hsien Chu. (1991) Adaptive Strategies for Coping with Product Variety
Decisions. International Journal of Operations & Production Management 11:8, pages 35-47.
Crossref
Kripa Shanker & Anil Kumar Agrawal. (1991) Loading problem and resource considerations in FMS: a review. International Journal of Production Economics 25:1-3, pages 111-119.
Crossref
Vandra L. Huber & Karen A. Brown. (1991) Human resource issues in cellular manufacturing: A sociotechnical analysis. Journal of Operations Management 10:1, pages 138-159.
Crossref
Oscar Garza & Timothy L. Smunt. (1991) Countering the negative impact of intercell flow in cellular manufacturing. Journal of Operations Management 10:1, pages 92-118.
Crossref
Chun Zhang & Hsu-Pin Wang. 1991. CAD/CAM Robotics and Factories of the Future ’90. CAD/CAM Robotics and Factories of the Future ’90
67
72
.
Chun Zhang & Hsu-Pin Wang. 1991. CAD/CAM Robotics and Factories of the Future ’90. CAD/CAM Robotics and Factories of the Future ’90
67
72
.
L. Hatzikonstantis, M. Sahirad, M. Ristic & C.B. Besant. (1990) Interactive Scheduling for a Human-Operated Flexible Machining Cell. IFAC Proceedings Volumes 23:3, pages 445-450.
Crossref
A.J. Wells. (1990) Cellular Facility Design Made Easy. IFAC Proceedings Volumes 23:3, pages 341-345.
Crossref
Jerry C. Wei & Norman Gaither. (2007) An Optimal Model for Cell Formation Decisions. Decision Sciences 21:2, pages 416-433.
Crossref
Itzhak Krinsky, Abraham Mehrez, G. John Miltenburg & Buddy L. Myers. (1990) Flexible manufacturing systems evaluation: An alternative approach. International Journal of Flexible Manufacturing Systems 2:3, pages 237-253.
Crossref
P. Freedman & R. Alami. (1990) Repetitive sequencing: from workcell tasks to workcell cycles. Repetitive sequencing: from workcell tasks to workcell cycles.
L. Hatzikonstantis, M. Sahirad, M. Ristic & C.B. Besant. 1990. Information Control Problems in Manufacturing Technology 1989. Information Control Problems in Manufacturing Technology 1989
445
450
.
A.J. Wells. 1990. Information Control Problems in Manufacturing Technology 1989. Information Control Problems in Manufacturing Technology 1989
341
345
.
S. Sankaran & Ervin Y. Rodin. (1990) Multiple objective decision making approach to cell formation: A goal programming model. Mathematical and Computer Modelling 13:9, pages 71-81.
Crossref
J.C. Wei & N. Gaither. (1990) A capacity constrained multiobjective cell formation method. Journal of Manufacturing Systems 9:3, pages 222-232.
Crossref
Agostino Villa. (1989) Knowledge Engineering Rules for Manufacturing System Design (KERMAS): Specify and Justify FMS Incremental Implementations. CIRP Annals 38:1, pages 497-500.
Crossref
C-H Chu. (1989) Cluster analysis in manufacturing cellular formation. Omega 17:3, pages 289-295.
Crossref
R. Meenakshi Sundaram. 1988. Robotics and Factories of the Future ’87. Robotics and Factories of the Future ’87
119
124
.
Harold J. Steudel & Arvind Ballakur. (1987) A dynamic programming based heuristic for machine grouping in manufacturing cell formation. Computers & Industrial Engineering 12:3, pages 215-222.
Crossref
Arnold Reisman, Burak Cem Konduk & Muhittin Oral. (2004) Meta Research in OR/MS: A Taxonomy, Bibliography and Classification of the Literature. SSRN Electronic Journal.
Crossref
D. G. Mahto & Anjani Kumar. (2009) Transforming Processes to Achieve Leanness in Manufacturing Setup: Viewpoint on Performance Measurements. SSRN Electronic Journal.
Crossref