Rasaratnam Logendran & Parthasarathi Ramakrishna. (2023) SETTING UP DISAGGREGATED MANUFACTURING CELLS IN THE PARTS MANUFACTURING PLANT. SETTING UP DISAGGREGATED MANUFACTURING CELLS IN THE PARTS MANUFACTURING PLANT.
Jose Joaquin del Pozo-Antúnez, Francisco Fernández-Navarro, Horacio Molina-Sánchez, Antonio Ariza-Montes & Mariano Carbonero-Ruz. (2021) The Machine-Part Cell Formation Problem with Non-Binary Values: A MILP Model and a Case of Study in the Accounting Profession. Mathematics 9:15, pages 1768.
Crossref
Ricardo Soto, Broderick Crawford, Rodrigo Olivares, César Carrasco, Eduardo Rodriguez-Tello, Carlos Castro, Fernando Paredes & Hanns de la Fuente-Mella. (2020) A Reactive Population Approach on the Dolphin Echolocation Algorithm for Solving Cell Manufacturing Systems. Mathematics 8:9, pages 1389.
Crossref
Lajmi Imen, Masmoudi Wassim, Elleuch Mounir & Chtourou Hedi. (2019) Improvement opportunities of a Simulation/Expert System Approach for Manufacturing System Sizing: A review and proposal. Advances in Science, Technology and Engineering Systems Journal 4:5, pages 213-223.
Crossref
Jose M. Lanza-Gutierrez, Ricardo Soto, Broderick Crawford, Juan A. Gomez-Pulido, Nicolas Fernandez & Carlos Castillo. 2018. Intelligent Systems. Intelligent Systems
1212
1231
.
Jose M. Lanza-Gutierrez, Ricardo Soto, Broderick Crawford, Juan A. Gomez-Pulido, Nicolas Fernandez & Carlos Castillo. 2017. Recent Developments in Intelligent Nature-Inspired Computing. Recent Developments in Intelligent Nature-Inspired Computing
37
61
.
Ilya Bychkov, Mikhail Batsyn & Panos M. Pardalos. 2017. Models, Algorithms, and Technologies for Network Analysis. Models, Algorithms, and Technologies for Network Analysis
11
26
.
M. Saravanan & P. V. Arulkumar. (2015) An artificial bee colony algorithm for design and optimize the fixed area layout problems. The International Journal of Advanced Manufacturing Technology 78:9-12, pages 2079-2095.
Crossref
W. K. Hwam, Y. Chung, D. S. Chang & S. C. Park. (2013) Analysis and Simulation Application for Manual Work Performance Improvement. International Journal of Information and Education Technology, pages 615-618.
Crossref
José Francisco Ferreira Ribeiro. 2013. Industrial Engineering. Industrial Engineering
1734
1748
.
Mikhail Batsyn, Ilya Bychkov, Boris Goldengorin, Panos Pardalos & Pavel Sukhov. 2013. Models, Algorithms, and Technologies for Network Analysis. Models, Algorithms, and Technologies for Network Analysis
11
50
.
José Francisco Ferreira Ribeiro. 2012. Operations Management Research and Cellular Manufacturing Systems. Operations Management Research and Cellular Manufacturing Systems
53
67
.
Nurcin Celik, Esfandyar Mazhari, John Canby, Omid Kazemi, Parag Sarfare, Majed S. Al-Otaibi & Young-Jun Son. 2012. Innovations in Information Systems for Business Functionality and Operations Management. Innovations in Information Systems for Business Functionality and Operations Management
225
252
.
Nurcin Celik, Esfandyar Mazhari, John Canby, Omid Kazemi, Parag Sarfare, Majed S. Al-Otaibi & Young-Jun Son. 2012. Grid and Cloud Computing. Grid and Cloud Computing
380
406
.
S. Karthikeyan, M. Saravanan & K. Ganesh. (2012) GT Machine Cell Formation Problem in Scheduling for Cellular Manufacturing System Using Meta-Heuristic Method. Procedia Engineering 38, pages 2537-2547.
Crossref
Azadeh Noktehdan, Behrooz Karimi & Ali Husseinzadeh Kashan. (2010) A differential evolution algorithm for the manufacturing cell formation problem using group based operators. Expert Systems with Applications 37:7, pages 4822-4829.
Crossref
Nurcin Celik, Esfandyar Mazhari, John Canby, Omid Kazemi, Parag Sarfare, Majed S. Al-Otaibi & Young-Jun Son. (2010) Automatic Partitioning of Large Scale Simulation in Grid Computing for Run Time Reduction. International Journal of Operations Research and Information Systems 1:2, pages 64-90.
Crossref
Innar Liiv. (2010) Seriation and matrix reordering methods: An historical overview. Statistical Analysis and Data Mining: The ASA Data Science Journal 3:2, pages 70-91.
Crossref
ChenGuang Liu, Yong Yin, Kazuhiko Yasuda & Jie Lian. (2009) A heuristic algorithm for cell formation problems with consideration of multiple production factors. The International Journal of Advanced Manufacturing Technology 46:9-12, pages 1201-1213.
Crossref
Bo Xing, Fulufhelo V. Nelwamondo, Kimberly Battle, Wenjing Gao & Tshilidzi Marwala. (2009) Application of artificial intelligence (AI) methods for designing and analysis of reconfigurable cellular manufacturing system (RCMS). Application of artificial intelligence (AI) methods for designing and analysis of reconfigurable cellular manufacturing system (RCMS).
ChenGuang Liu, Lin Zhu & Kazuyuki Tanaka. (2009) An Algorithm for the Design of Manufacturing Cells. An Algorithm for the Design of Manufacturing Cells.
Adnan Tariq, Iftikhar Hussain & Abdul Ghafoor. (2009) A hybrid genetic algorithm for machine-part grouping. Computers & Industrial Engineering 56:1, pages 347-356.
Crossref
Adnan Tariq, Iftikhar Hussain & Abdul Ghafoor. (2007) Consideration of Single Machine Cells in Designing Cellular Manufacturing System using a Hybrid Genetic Algorithm. Consideration of Single Machine Cells in Designing Cellular Manufacturing System using a Hybrid Genetic Algorithm.
Adnan Tariq, Iftikhar Hussain & Abdul Ghafoor. (2006) A Hybrid Genetic Algorithm for Machine Part Grouping. A Hybrid Genetic Algorithm for Machine Part Grouping.
Fantahun M. Defersha & Mingyuan Chen. (2006) A comprehensive mathematical model for the design of cellular manufacturing systems. International Journal of Production Economics 103:2, pages 767-783.
Crossref
Chang-Chun Tsai & Chung-ying Lee. (2006) Optimization of manufacturing cell formation with a multi-functional mathematical programming model. The International Journal of Advanced Manufacturing Technology 30:3-4, pages 309-318.
Crossref
L.R. Foulds, A.P. French & J.M. Wilson. (2006) The sustainable cell formation problem: manufacturing cell creation with machine modification costs. Computers & Operations Research 33:4, pages 1010-1032.
Crossref
Poornachandra Rao Panchalavarapu & Vira Chankong. (2005) Design of cellular manufacturing systems with assembly considerations. Computers & Industrial Engineering 48:3, pages 449-469.
Crossref
David F. Rogers & Shailesh S. Kulkarni. (2005) Optimal bivariate clustering and a genetic algorithm with an application in cellular manufacturing. European Journal of Operational Research 160:2, pages 423-444.
Crossref
José Fernando Gonçalves & Mauricio G.C. Resende. (2004) An evolutionary algorithm for manufacturing cell formation. Computers & Industrial Engineering 47:2-3, pages 247-273.
Crossref
L.R. Foulds & K. Neumann. (2003) A network flow model of group technology. Mathematical and Computer Modelling 38:5-6, pages 623-635.
Crossref
Hassan M. Selim. (2002) Manufacturing cell formation problem: a graph partitioning approach. Industrial Management & Data Systems 102:6, pages 341-352.
Crossref
A.M. Mukattash, M.B. Adil & K.K. Tahboub. (2002) Heuristic approaches for part assignment in cell formation. Computers & Industrial Engineering 42:2-4, pages 329-341.
Crossref
Gideon Halevi. 2001. Handbook of Production Management Methods. Handbook of Production Management Methods
59
310
.
H.M. Selim. 2000. Current Advances in Mechanical Design and Production VII. Current Advances in Mechanical Design and Production VII
579
589
.
Victor L. Berardi, Guoqiang Zhang & O. Felix Offodile. (1999) A mathematical programming approach to evaluating alternative machine clusters in cellular manufacturing. International Journal of Production Economics 58:3, pages 253-264.
Crossref
S.M. Taboun, N.S. Merchawi & T. Ulger. (1998) A two-stage model for cost effective part family and machine cell formation. Computers & Industrial Engineering 34:4, pages 759-776.
Crossref
Ashok Kumar & Jaideep Motwani. (1998) Case study: reconfiguring a manufacturing system for strategic advantage ‐ a real‐world application. Logistics Information Management 11:4, pages 244-256.
Crossref
Sunderesh S. Heragu & Ja-Shen Chen. (1998) Optimal solution of cellular manufacturing system design: Benders' decomposition approach. European Journal of Operational Research 107:1, pages 175-192.
Crossref
Kyung-Hyun Choi & Hae-Yong Cho. (1998) A cost-based algorithm for design of Cellular Manufacturing Systems. KSME International Journal 12:2.
Crossref
William T. Akright & Dennis E. Kroll. (1998) Cell formation performance measures—determining when to change an existing layout. Computers & Industrial Engineering 34:1, pages 159-171.
Crossref
Ming Zhou & Ronald G. Askin. (1998) Formation of general GT cells: an operation-based approach. Computers & Industrial Engineering 34:1, pages 147-157.
Crossref
Stuart Jay Deutsch, Susan F. Freeman & Mary Helander. (1998) Manufacturing cell formation using an improved P-median model. Computers & Industrial Engineering 34:1, pages 135-146.
Crossref
Kim LaScola Needy, Richard E. Billo & Rona Colosimo Warner. (1998) A cost model for the evaluation of alternative cellular manufacturing configurations. Computers & Industrial Engineering 34:1, pages 119-134.
Crossref
Richard E. Billo. (1998) A design methodology for configuration of manufacturing cells. Computers & Industrial Engineering 34:1, pages 63-75.
Crossref
Hassan M. Selim, Ronald G. Askin & Asoo J. Vakharia. (1998) Cell formation in group technology: Review, evaluation and directions for future research. Computers & Industrial Engineering 34:1, pages 3-20.
Crossref
Dan Braha & Oded MaimonDan Braha & Oded Maimon. 1998. A Mathematical Theory of Design: Foundations, Algorithms and Applications. A Mathematical Theory of Design: Foundations, Algorithms and Applications
321
352
.
S. M. Shafer. 1998. Group Technology and Cellular Manufacturing. Group Technology and Cellular Manufacturing
131
152
.
C. H. Cheng, W. H. Lee & J. Miltenburg. 1998. Group Technology and Cellular Manufacturing. Group Technology and Cellular Manufacturing
205
219
.
Bhaba R. Sarker & Kun Li. (1997) Simultaneous route selection and cell formation: a mixed‐integer programming time‐cost model. Integrated Manufacturing Systems 8:6, pages 374-377.
Crossref
Rasaratnam Logendran & Diane Talkington. (1997) Analysis of cellular and functional manufacturing systems in the presence of machine breakdown. International Journal of Production Economics 53:3, pages 239-256.
Crossref
Rasaratnam Logendran & Chang Seong Ko. (1997) Manufacturing cell formation in the presence of flexible cell locations and material transporters. Computers & Industrial Engineering 33:3-4, pages 545-548.
Crossref
Rasaratnam Logendran & Parthasarathi Ramakrishna. (1997) A methodology for simultaneously dealing with machine duplication and part subcontracting in cellular manufacturing systems. Computers & Operations Research 24:2, pages 97-116.
Crossref
Sunderesh S. Heragu & Sivakumar R. Kakuturi. 1996. Manufacturing Decision Support Systems. Manufacturing Decision Support Systems
180
203
.
Nanua Singh & Divakar RajamaniNanua Singh & Divakar Rajamani. 1996. Cellular Manufacturing Systems. Cellular Manufacturing Systems
154
180
.
Chun‐Hung Cheng, Ashok Kumar & Jaideep Motwani. (1995) A comparative examination of selected cellular manufacturing
clustering algorithms. International Journal of Operations & Production Management 15:12, pages 86-97.
Crossref
J. Balakrishnan & P.D. Jog. (1995) Manufacturing cell formation using similarity coefficients and a parallel genetic TSP algorithm: Formulation and comparison. Mathematical and Computer Modelling 21:12, pages 61-73.
Crossref
Mohsen M.D. Hassan. (1995) Layout design in group technology manufacturing. International Journal of Production Economics 38:2-3, pages 173-188.
Crossref
Rasaratnam Logendran, Luen Mai & Diane Talkington. (1995) Combined heuristics for bi-level group scheduling problems. International Journal of Production Economics 38:2-3, pages 133-145.
Crossref
Sheng-Chai Chi & Shih-Yaug Liu. (1995) A flexible neural network approach for machine cell formation. A flexible neural network approach for machine cell formation.
Soheyla Kamal. 1995. Planning, Design, and Analysis of Cellular Manufacturing Systems. Planning, Design, and Analysis of Cellular Manufacturing Systems
251
282
.
D.F. Rogers & S.M. Shafer. 1995. Planning, Design, and Analysis of Cellular Manufacturing Systems. Planning, Design, and Analysis of Cellular Manufacturing Systems
147
165
.
Soha Eid Moussa & Mohamed S. Kamel. 1995. Planning, Design, and Analysis of Cellular Manufacturing Systems. Planning, Design, and Analysis of Cellular Manufacturing Systems
73
95
.
Chao-Hsien Chu. 1995. Planning, Design, and Analysis of Cellular Manufacturing Systems. Planning, Design, and Analysis of Cellular Manufacturing Systems
3
46
.
A. Gunasekaran, T. Martikainen & P. Yli-Olli. 1995. Flexible Manufacturing Systems: Recent Developments - Reference for Modern Instrumentation, Techniques, and Technology. Flexible Manufacturing Systems: Recent Developments - Reference for Modern Instrumentation, Techniques, and Technology
3
44
.
Laura Burke & Soheyla Kamal. (1995) Neural networks and the part family/ machine group formation problem in cellular manufacturing: A framework using fuzzy ART. Journal of Manufacturing Systems 14:3, pages 148-159.
Crossref
Shashidhar Kaparthi & Nallan C. Suresh. (1994) Performance of Selected Part-Machine Grouping Techniques for Data Sets of Wide Ranging Sizes and Imperfection. Decision Sciences 25:4, pages 515-539.
Crossref
S.S. Heragu. (1994) Group technology and cellular manufacturing. IEEE Transactions on Systems, Man, and Cybernetics 24:2, pages 203-215.
Crossref
K.K.B. Hon & H. Chi. (1994) A New Approach of Group Technology Part Families Optimization. CIRP Annals 43:1, pages 425-428.
Crossref
C. L. Moodie, J. Drolet, Y.-C. Ho & G. M. H. Warren. 1994. Material Flow Systems in Manufacturing. Material Flow Systems in Manufacturing
75
101
.
Rasaratnam Logendran & Chelliah Sriskandarajah. (1993) Two-machine group scheduling problem with blocking and anticipatory setups. European Journal of Operational Research 69:3, pages 467-481.
Crossref
N. Singh. (1993) Design of cellular manufacturing systems: An invited review. European Journal of Operational Research 69:3, pages 284-291.
Crossref
Rasaratnam Logendran & Parthasarathi Ramakrishan. (1993) Effect of machining time in the duplication process of machine cells formation. Computers & Industrial Engineering 25:1-4, pages 29-32.
Crossref
S.F. Abdinnour, M.A. Venkataramanan & F.R. Jacobs. (1993) Models of various cell structures in GT. Mathematical and Computer Modelling 18:2, pages 35-42.
Crossref
Rasaratnam Logendran. (1993) A biary integer programming approach for simultaneous machine-part grouping in cellular manufacturing systems. Computers & Industrial Engineering 24:3, pages 329-336.
Crossref
A. Gunasekaran, T. Martikainen & P. Yli-Olli. (1993) Flexible manufacturing systems: An investigation for research and applications. European Journal of Operational Research 66:1, pages 1-26.
Crossref
Rasaratnam Logendran. (1993) Methodology for converting a functional manufacturing system into a cellular manufacturing system. International Journal of Production Economics 29:1, pages 27-41.
Crossref
Rasaratnam Logendran. (1992) Group scheduling problem: Key to flexible manufacturing systems. Computers & Industrial Engineering 23:1-4, pages 113-116.
Crossref
Ali K. Kamrani & Hamid R. Parsaei. (1992) A methodology of forming manufacturing cells using manufacturing and design attributes. Computers & Industrial Engineering 23:1-4, pages 73-76.
Crossref
Ronald G. Askin & M.George Mitwasi. (1992) Integrating facility layout with process selection and capacity planning. European Journal of Operational Research 57:2, pages 162-173.
Crossref
Mesbah U. Ahmed, Nazim U. Ahmed & Udayan Nandkeolyar. (2002) A volume and material handling cost based heuristic for designing cellular manufacturing cells. Journal of Operations Management 10:4, pages 488-511.
Crossref
Scott M. Shafer & David F. Rogers. (2002) A goal programming approach to the cell formation problem. Journal of Operations Management 10:1, pages 28-43.
Crossref