Rakhi Singh & John Stufken. (2024) Factor selection in screening experiments by aggregation over random models. Computational Statistics & Data Analysis 194, pages 107940.
Crossref
Christopher T. Franck, Sara L. Arena & Michael L. Madigan. (2022) Approximate Bayesian Techniques for Statistical Model Selection and Quantifying Model Uncertainty—Application to a Gait Study. Annals of Biomedical Engineering 51:2, pages 422-429.
Crossref
Wei Jiang, Terrence E. Murphy, Kwok-Leung Tsui & Yang Zhao. 2023. Springer Handbook of Engineering Statistics. Springer Handbook of Engineering Statistics
199
220
.
Yngvild Hole Hamre & John Tyssedal. (2022) On the identification of active factors in nonregular two‐level designs with a small number of runs. Quality and Reliability Engineering International 38:8, pages 4099-4121.
Crossref
Anxhelina Qorllari & Thomas A. Bier. (2022) Optimization of Workability and Compressive Strength of Self-Compacting Mortar Using Screening Design. CivilEng 3:4, pages 998-1012.
Crossref
Dongyuan Liu, Kyohei Funahashi & Hironobu Kawamura. (2021) A Performance Comparison of Combinations of 2-level Supersaturated Designs and Analysis Methods. Total Quality Science 6:1, pages 20-33.
Crossref
H Daou & W Raphael. (2020) Investigation of the Significance of Factors Affecting Long-Term Creep of Concrete using Screening Designs. IOP Conference Series: Materials Science and Engineering 809:1, pages 012016.
Crossref
E.V. Endiiarova & G.S. Eritsyan. (2020) Treatment of textile in a low-temperature gas-discharge plasma. Materials Today: Proceedings 30, pages 516-519.
Crossref
Muhammad Azam Chaudhry & John Tyssedal. (2019) Assessing some aspects of factor screening with nonnormal responses. Applied Stochastic Models in Business and Industry 35:4, pages 1044-1059.
Crossref
Rafel Xampeny, Pere Grima & Xavier Tort‐Martorell. (2018) Consequences of using estimated response values from negligible interactions in factorial designs. Quality and Reliability Engineering International 35:4, pages 934-945.
Crossref
Jelena Čolović, Milena Rmandić & Anđelija Malenović. (2018) Robust Optimization of Chaotropic Chromatography Assay for Lamotrigine and its Two Impurities in Tablets. Chromatographia 82:2, pages 565-577.
Crossref
Leila Mousavi, Zahra Tamiji & Mohammad Reza Khoshayand. (2018) Applications and opportunities of experimental design for the dispersive liquid–liquid microextraction method – A review. Talanta 190, pages 335-356.
Crossref
Kyohei Funahashi & Hironobu Kawamura. (2018) <b>Analysis of two-level supersaturated designs using</b><b> the Modified Box-Meyer method</b>. Total Quality Science 4:1, pages 34-40.
Crossref
I‐Tang Yu. (2017) A Bayesian analysis of reliability improvement experiments. Quality and Reliability Engineering International 33:8, pages 2531-2538.
Crossref
John Tyssedal & Muhammad Azam Chaudhry. (2017) The choice of screening design. Applied Stochastic Models in Business and Industry 33:6, pages 662-673.
Crossref
Nathan D. Burrows, Samantha Harvey, Fred A. Idesis & Catherine J. Murphy. (2016) Understanding the Seed-Mediated Growth of Gold Nanorods through a Fractional Factorial Design of Experiments. Langmuir 33:8, pages 1891-1907.
Crossref
Linda Lee Ho, Carla A. Vivacqua & André Luís Santos de Pinho. (2015) Minimum Setup Minimum Aberration Two‐level Split‐plot Type Designs for Physical Prototype Testing. Quality and Reliability Engineering International 32:3, pages 1007-1020.
Crossref
Linhan Ouyang, Yizhong Ma, Jai‐Hyun Byun, Jianjun Wang & Yiliu Tu. (2015) A Prediction Region‐based Approach to Model Uncertainty for Multi‐response Optimization. Quality and Reliability Engineering International 32:3, pages 783-794.
Crossref
Shane Dougherty, James R. Simpson, Raymond R. Hill, Joseph J. Pignatiello & Edward D. White. (2015) Effect of Heredity and Sparsity on Second-Order Screening Design Performance. Quality and Reliability Engineering International 31:3, pages 355-368.
Crossref
Matthias Hwai Yong Tan. (2015) Sequential Bayesian Polynomial Chaos Model Selection for Estimation of Sensitivity Indices. SIAM/ASA Journal on Uncertainty Quantification 3:1, pages 146-168.
Crossref
Steven L. Scott. (2015) Multi‐armed bandit experiments in the online service economy. Applied Stochastic Models in Business and Industry 31:1, pages 37-45.
Crossref
John Tyssedal. 2014. Wiley StatsRef: Statistics Reference Online. Wiley StatsRef: Statistics Reference Online.
John Tyssedal. 2014. Wiley StatsRef: Statistics Reference Online. Wiley StatsRef: Statistics Reference Online.
Russell V. Lenth. 2014. Wiley StatsRef: Statistics Reference Online. Wiley StatsRef: Statistics Reference Online.
David J. Edwards, Maria L. Weese & Gregory A. Palmer. (2013) Comparing methods for design follow‐up: revisiting a metal‐cutting case study. Applied Stochastic Models in Business and Industry 30:4, pages 464-478.
Crossref
Davide Ferrari, Matteo Borrotti & Davide De March. (2013) Response improvement in complex experiments by co-information composite likelihood optimization. Statistics and Computing 24:3, pages 351-363.
Crossref
Víctor Aguirre‐Torres & Román de la Vara. (2013) A Bayesian Analysis of Very Small Unreplicated Experiments. Quality and Reliability Engineering International 30:3, pages 413-426.
Crossref
Alex J. Gutman, Edward D. White, Dennis K.J. Lin & Raymond R. Hill. (2014)
Augmenting supersaturated designs with Bayesian
-optimality
. Computational Statistics & Data Analysis 71, pages 1147-1158.
Crossref
Conrad A. Fung. (2014) George Box, quality, and improving almost anything. Applied Stochastic Models in Business and Industry 30:1, pages 71-79.
Crossref
R. Daniel Meyer. (2014) George Box and Bayesian inference. Applied Stochastic Models in Business and Industry 30:1, pages 62-70.
Crossref
David J. Edwards & David H. Q. Truong. (2011) A comparison of designs for one‐step screening and response surface estimation. Quality and Reliability Engineering International 27:8, pages 1009-1024.
Crossref
Phil Woodward. 2011. Bayesian Analysis Made Simple. Bayesian Analysis Made Simple
335
340
.
Anthony Cossari. 2011. New Perspectives in Statistical Modeling and Data Analysis. New Perspectives in Statistical Modeling and Data Analysis
385
392
.
John Tyssedal & Oddgeir Samset. (2010) Supersaturated designs of projectivity P=3 or near P=3. Journal of Statistical Planning and Inference 140:4, pages 1021-1029.
Crossref
Giuseppina Ambrogio, A. Cossari, Luigino Filice & G. Leonardo Manco. (2009) Incremental Forming of Multislope Shaped Components. Advanced Materials Research 83-86, pages 94-100.
Crossref
Frederick K. H. Phoa, Weng Kee Wong & Hongquan Xu. (2009) The need of considering the interactions in the analysis of screening designs. Journal of Chemometrics 23:10, pages 545-553.
Crossref
Hongquan Xu, Frederick K.H. Phoa & Weng Kee Wong. (2009) Recent developments in nonregular fractional factorial designs. Statistics Surveys 3:none.
Crossref
John Tyssedal. 2007. Encyclopedia of Statistics in Quality and Reliability. Encyclopedia of Statistics in Quality and Reliability.
John Tyssedal. 2007. Encyclopedia of Statistics in Quality and Reliability. Encyclopedia of Statistics in Quality and Reliability.
Russell V. Lenth. 2007. Encyclopedia of Statistics in Quality and Reliability. Encyclopedia of Statistics in Quality and Reliability.
Kenny Q. Ye, Ko-Jen Tsai & William Li. 2007. mODa 8 - Advances in Model-Oriented Design and Analysis. mODa 8 - Advances in Model-Oriented Design and Analysis
221
228
.
Ola Blomkvist, Fredrik Ekdahl & Anders Gustafsson. 2007. Conjoint Measurement. Conjoint Measurement
77
92
.
Mehdi Mehrban, Shahriar Kouravand, Ghader Rezazadeh & Ali Donyavi. (2006) Application of Full Factorial Design Method in MEMS Capacitive Thermal Sensor Sensitivity. Application of Full Factorial Design Method in MEMS Capacitive Thermal Sensor Sensitivity.
Arvind Ruggoo & Martina Vandebroek. (2006) Model-sensitive sequential optimal designs. Computational Statistics & Data Analysis 51:2, pages 1089-1099.
Crossref
John Tyssedal, Hallgeir Grinde & Carl C. Røstad. (2006) The Use of a 12‐run Plackett–Burman Design in the Injection Moulding of a Technical Plastic Component. Quality and Reliability Engineering International 22:6, pages 651-657.
Crossref
C. Auer & J. Kunert. (2005) On a heuristic analysis of highly fractionated 2 n factorial experiments. Metrika 63:1, pages 43-54.
Crossref
Wei Jiang, Terrence Murphy & Kwok-Leung Tsui. 2006. Springer Handbook of Engineering Statistics. Springer Handbook of Engineering Statistics
173
192
.
Daniel T. Voss & Weizhen Wang. 2006. Screening. Screening
268
286
.
Hugh Chipman. 2006. Screening. Screening
236
267
.
Seungtai Yoon, Young Ju Suh, Nancy Role Mendell & Kenny Qian Ye. (2005) A Bayesian approach for applying Haseman-Elston methods. BMC Genetics 6:S1.
Crossref
John Tyssedal & Murat Kulahci. (2005) Analysis of Split‐plot Designs with Mirror Image Pairs as Sub‐plots. Quality and Reliability Engineering International 21:5, pages 539-551.
Crossref
Ewa A. Bardasz, Susan V. Cowling, Avtar Panesar, John Durham & Ted N. Tadrous. Effects of Lubricant Derived Chemistries on Performance of the Catalyzed Diesel Particulate Filters. Effects of Lubricant Derived Chemistries on Performance of the Catalyzed Diesel Particulate Filters.
Arvind Ruggoo & Martina Vandebroek. (2004) Bayesian sequential - optimal model-robust designs. Computational Statistics & Data Analysis 47:4, pages 655-673.
Crossref
David P. Dupplaw, David Brunson, Anna-Jane E. Vine, Colin P. Please, Susan M. Lewis, Angela M. Dean, Andy J. Keane & Marcus J. Tindall. (2004) A Web-Based Knowledge Elicitation System (GISEL) for Planning and Assessing Group Screening Experiments for Product Development. Journal of Computing and Information Science in Engineering 4:3, pages 218-225.
Crossref
Kimberly Kinateder, Weizhen Wang & Daniel Voss. 2003. Advances on Methodological and Applied Aspects of Probability and Statistics. Advances on Methodological and Applied Aspects of Probability and Statistics
325
347
.
Vitali Volovoi, Jack Zentner & Dimitri Mavris. (2003) Assessment of the Efficiency of Partitioned Response Surface Equations in Structural Applications. Assessment of the Efficiency of Partitioned Response Surface Equations in Structural Applications.
Chuen-Lung Chen, Rong-Ho Lin & Jianping Zhang. (2003) Genetic algorithms for MD-optimal follow-up designs. Computers & Operations Research 30:2, pages 233-252.
Crossref
Ola Blomkvist, Fredrik Ekdahl & Anders Gustafsson. 2003. Conjoint Measurement. Conjoint Measurement
187
207
.
D Stamatis. 2002. Six Sigma and Beyond. Six Sigma and Beyond
345
365
.
Gerald J. Hahn & Angela N. Patterson. 2001. Kirk-Othmer Encyclopedia of Chemical Technology. Kirk-Othmer Encyclopedia of Chemical Technology.
John Lawson. (2002) Regression analysis of experiments with complex confounding patterns guided by the alias matrix. Computational Statistics & Data Analysis 39:2, pages 227-241.
Crossref
Theodore T. Allen & Liyang Yu. (2002) Low‐cost response surface methods from simulation optimization. Quality and Reliability Engineering International 18:1, pages 5-17.
Crossref
Yannis L Loukas. (2001) A Plackett–Burnam screening design directs the efficient formulation of multicomponent DRV liposomes. Journal of Pharmaceutical and Biomedical Analysis 26:2, pages 255-263.
Crossref
Ola Blomkvist, Fredrik Ekdahl & Anders Gustafsson. 2001. Conjoint Measurement. Conjoint Measurement
161
181
.
T. Allen & L. Yu. (2000) Low cost response surface methods for and from simulation optimization. Low cost response surface methods for and from simulation optimization.
Anders Gustafsson, Andreas Herrmann & Frank HuberOla Blomkvist, Fredrik Ekdahl & Anders Gustafsson. 2000. Conjoint Measurement. Conjoint Measurement
161
181
.
Daniel T. Voss & Weizhen Wang. (1999) Simultaneous confidence intervals in the analysis of orthogonal saturated designs. Journal of Statistical Planning and Inference 81:2, pages 383-392.
Crossref
Øyvind Langsrud & Tormod Næs. (1998) A unified framework for significance testing in fractional factorials. Computational Statistics & Data Analysis 28:4, pages 413-431.
Crossref
Gareth Lewis, Didier Mathieu & Roger Phan-Tan-Luu. 1998. Pharmaceutical Experimental Design. Pharmaceutical Experimental Design.
Hugh A. Chipman. 1998. Quality Improvement Through Statistical Methods. Quality Improvement Through Statistical Methods
207
220
.
George E. P. Box. 1998. Quality Improvement Through Statistical Methods. Quality Improvement Through Statistical Methods
3
12
.
B. M. Dabade & P. K. Ray. (1996) Quality engineering for continuous performance improvement in products and processes: A review and reflections. Quality and Reliability Engineering International 12:3, pages 173-189.
Crossref
Stephen P. Jones. 1996. Robustness of analytical chemical methods and pharmaceutical technological products. Robustness of analytical chemical methods and pharmaceutical technological products
11
77
.
George Box. 1996. COMPSTAT. COMPSTAT
3
10
.
Neil T. Diamond. (2008) SOME PROPERTIES OF A FOLDOVER DESIGN. Australian Journal of Statistics 37:3, pages 345-352.
Crossref
T. P. Davis. (1995) Analysis of an experiment aimed at improving the reliability of transmission centre shafts. Lifetime Data Analysis 1:3, pages 275-306.
Crossref
Mitchell M. Jackson & Sara B. Pocinki. Effects of Fuel and Additives on Combustion Chamber Deposits. Effects of Fuel and Additives on Combustion Chamber Deposits.
T.S. Webb & K.W. Bauer. (1994) Comparison of analysis strategies for screening designs in large-scale computer simulation models. Comparison of analysis strategies for screening designs in large-scale computer simulation models.
Kenneth G. Claar, Glen H. Blythe & Sara B. Pocinki. Diesel Fuel Properties and Additive Effects on Dl Injector Deposit Formation. Diesel Fuel Properties and Additive Effects on Dl Injector Deposit Formation.