Advanced search
Publication Cover
Powder Metallurgy Volume 61, 2018 - Issue 2
Journal homepage
517
Views
8
CrossRef citations to date
0
Altmetric
Special theme block on high entropy alloys, guest edited by Paula Alvaredo Olmos, Universidad Carlos III de Madrid, Spain, and Sheng Guo, Chalmers University, Gothenburg, Sweden

Influence of Cr removal on the microstructure and mechanical behaviour of a high-entropy Al0.8Ti0.2CoNiFeCr alloy fabricated by powder metallurgy

Zhiqiang FuDepartment of Chemical Engineering and Materials Science, University of California, Irvine, CA, USA;Guangdong Key Laboratory for Advanced Metallic Materials Processing, South China University of Technology, Guangzhou, Guangdong, People’s Republic of ChinaCorrespondence[email protected]
View further author information
,
Weiping ChenGuangdong Key Laboratory for Advanced Metallic Materials Processing, South China University of Technology, Guangzhou, Guangdong, People’s Republic of ChinaView further author information
,
Zhenfei JiangGuangdong Key Laboratory for Advanced Metallic Materials Processing, South China University of Technology, Guangzhou, Guangdong, People’s Republic of ChinaView further author information
,
Benjamin E. MacDonaldDepartment of Chemical Engineering and Materials Science, University of California, Irvine, CA, USAView further author information
,
Yaojun LinState Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, People’s Republic of ChinaView further author information
,
Fei ChenState Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, People’s Republic of ChinaView further author information
,
Lianmeng ZhangState Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, People’s Republic of ChinaORCID Iconhttp://orcid.org/0000-0002-0653-2230View further author information
ORCID Icon &
Enrique J. LaverniaDepartment of Chemical Engineering and Materials Science, University of California, Irvine, CA, USACorrespondence[email protected]
View further author information
 show all
Pages 106-114 | Received 25 May 2017, Accepted 09 Jan 2018, Published online: 26 Jan 2018

Citations (8)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (1)

J. M. Torralba, P. Alvaredo & Andrea García-Junceda. (2019) High-entropy alloys fabricated via powder metallurgy. A critical review. Powder Metallurgy 62:2, pages 84-114.
Read now

Articles from other publishers (7)

S. Ragunath, N. Radhika, S. Aravind Krishna & N. Jeyaprakash. (2023) Synthesis of High Entropy Alloy for Surface Modification by Friction Stir Process: Recent Advances and Future Directions. Metals and Materials International.
Crossref
Uddebornhalli Lavakumar Ganesh, Hebbar Raghavendra, Gowdru Chandrashekarappa Manjunath Patel, Avinash Lakshmikanthan, Emanoil Linul, Chander Prakash, Dharam Buddhi & Bharat singh. (2022) Design and Development of Low Density and Refractory Based on Ni-Ti-Al-Li-Si Pentanary Equiatomic High Entropy Alloys: Microstructure and Phase Analysis. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Ashutosh Sharma, Hansung Lee & Byungmin Ahn. (2022) Effect of Additive Elements (x = Cr, Mn, Zn, Sn) on the Phase Evolution and Thermodynamic Complexity of AlCuSiFe-x High Entropy Alloys Fabricated via Powder Metallurgy. Metals and Materials International 28:9, pages 2216-2224.
Crossref
Kaouther Zaara, Mahmoud Chemingui, Sophie Le Gallet, Yves Gaillard, Lluisa Escoda, Joan Saurina, Joan Josep Suñol, Frédéric Bernard, Mohamed Khitouni & Virgil Optasanu. (2020) High-Entropy FeCoNiB0.5Si0.5 Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering. Crystals 10:10, pages 929.
Crossref
Seungjin Nam, Se Eun Shin, Jae-Hun Kim & Hyunjoo Choi. (2020) Effect of Powder Morphology and Chemical Distribution on Properties of Multicomponent Alloys Produced Via Powder Metallurgy. Metals and Materials International 26:9, pages 1385-1393.
Crossref
Binhua Luo, Hang Yang, Boxun Zhou, Sanjrani Manzoor Ahmed, Yi Zhang, Huamin Liu, Xiaowen Liu, Yong He & Shibin Xia. (2020) Facile Synthesis of Luffa Sponge Activated Carbon Fiber Based Carbon Quantum Dots with Green Fluorescence and Their Application in Cr(VI) Determination. ACS Omega 5:10, pages 5540-5547.
Crossref
Vikas Shivam, Yagnesh Shadangi, Joysurya Basu & Nilay Krishna Mukhopadhyay. (2019) Alloying behavior and thermal stability of mechanically alloyed nano AlCoCrFeNiTi high-entropy alloy. Journal of Materials Research 34:5, pages 787-795.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.