Citations (43)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
Thanate Ratanawilai, Vira Leelasilapasart, Chainarong Srivabut & Sukritthira Ratanawilai. (2023) Lifetime prediction under dead-load long-term creep test and models analysis of wood-plastic composites for building materials. Plastics, Rubber and Composites 52:9-10, pages 506-515.
Read now
Read now
Edgars Kuka, Dace Cirule, Janis Kajaks, Ingeborga Andersone & Bruno Andersons. (2018) Wood particle size influence on water resistance and mechanical properties of thermally modified wood-polypropylene composites. International Wood Products Journal 9:2, pages 90-95.
Read now
Read now
Ajaya
Kumar Behera, Sridevi Avancha, Ramkrishna Sen & Basudam Adhikari. (2013) Development and Characterization of Nanoclay-Modified Soy Resin-Based Jute Composite as an Eco-friendly/Green Product. Polymer-Plastics Technology and Engineering 52:8, pages 833-840.
Read now
Read now
Articles from other publishers (40)
Wenjian Nie, Yangchao Liao, Sarah Ghazanfari, Yang Wang, Xingyu Wang, Ying Huang & Wenjie Xia. (2024) Insights into the thermomechanical and interfacial behaviors of polymer‐clay nanocomposites via coarse‐grained molecular dynamics simulations. Polymer Composites.
Crossref
Crossref
Bhuvaneshwaran Mylsamy, Senthil Kumar Marudhamuthu Shanmugam, Karthik Aruchamy, Sivasubramanian Palanisamy, Rajini Nagarajan & Nadir Ayrilmis. (2024) A review on natural fiber composites: Polymer matrices, fiber surface treatments, fabrication methods, properties, and applications. Polymer Engineering & Science.
Crossref
Crossref
Rabboni Mike Government & Edozie Thompson Okeke. (2024) Effect of particle size on the properties of avocado pear wood fiber/low-density polyethylene composite enhanced by pretreatment. Materials Testing 66:1, pages 22-35.
Crossref
Crossref
Sriwan Khamtree, Chatree Homkhiew, Chainarong Srivabut, Thanate Ratanawilai, Surasit Rawangwong & Salim Hiziroglu. (2023) Evaluation of Mechanical Properties of Composites Made from Recycled Plastic and Waste Rubberwood Using Multiply-Response Surface Optimization as Green Building Materials. Fibers and Polymers.
Crossref
Crossref
Morchid Fatima Ezzahrae, Akkouri Nacer, Elfarissi Latifa, Zamma Abdellah, Idiri Mohamed & Jammoukh Mustapha. (2023) Thermal and mechanical properties of a high-density polyethylene (HDPE) composite reinforced with wood flour. Materials Today: Proceedings 72, pages 3602-3608.
Crossref
Crossref
Charaf Lazrak & Maryama Hammi. (2022) Experimental and modeling studies on water absorption kinetics of recycled wood-polymer composites. Journal of the Indian Academy of Wood Science 19:2, pages 52-60.
Crossref
Crossref
Roberto Aguado, Francesc Xavier Espinach, Fabiola Vilaseca, Quim Tarrés, Pere Mutjé & Marc Delgado-Aguilar. (2022) Approaching a Zero-Waste Strategy in Rapeseed (Brassica napus) Exploitation: Sustainably Approaching Bio-Based Polyethylene Composites. Sustainability 14:13, pages 7942.
Crossref
Crossref
Muhammad Latif, Yangxiaozhe Jiang, Bijender Kumar, Jong Min Song, Hyeon Cheol Cho & Jaehwan Kim. (2022) High Content Nanocellulose 3D‐Printed and Esterified Structures with Strong Interfacial Adhesion, High Mechanical Properties, and Shape Fidelity. Advanced Materials Interfaces 9:16.
Crossref
Crossref
Rabboni Mike Government, Edozie Thompson Okeke, Ibrahim Adamu Ibrahim & Okechukwu Dominic Onukwuli. (2022) Modeling and simulation of tensile properties of r-LDPE/GSF composite using the response surface methododology. Materials Testing 64:3, pages 446-454.
Crossref
Crossref
Nurliyana Nasrin Juhardi, Mohd Nazry Salleh, Roslaili Abdul Aziz, Luqman Musa, Mohd Fairul Sharin Abdul Razak & Ismail Hanafi. Effect of thermally treated rice husk on the rice husk/LDPE composites with and without MAPE. Effect of thermally treated rice husk on the rice husk/LDPE composites with and without MAPE.
Junjie Xu, Xiaolong Hao, Wei Tang, Haiyang Zhou, Lei Chen, Chuigen Guo, Qingwen Wang & Rongxian Ou. (2021) Mechanical properties, morphology, and creep resistance of ultra-highly filled bamboo fiber/polypropylene composites: Effects of filler content and melt flow index of polypropylene. Construction and Building Materials 310, pages 125289.
Crossref
Crossref
Orevaoghene Eterigho-Ikelegbe, Kelvin O. Yoro & Samson Bada. (2021) Coal as a Filler in Polymer Composites: A Review. Resources, Conservation and Recycling 174, pages 105756.
Crossref
Crossref
Chainarong Srivabut, Thanate Ratanawilai & Salim Hiziroglu. (2021) Statistical modeling and response surface optimization on natural weathering of wood–plastic composites with calcium carbonate filler. Journal of Material Cycles and Waste Management 23:4, pages 1503-1517.
Crossref
Crossref
Nadir Ayrilmis, Sarawut Rimdusit, Rajini Nagarajan & M. P. Indira Devi. 2021. Mechanical and Dynamic Properties of Biocomposites. Mechanical and Dynamic Properties of Biocomposites
77
108
.
Fatima Ezzahra Hanana & Denis Rodrigue. (2020) Effect of particle size, fiber content, and surface treatment on the mechanical properties of maple-reinforced LLDPE produced by rotational molding. Polymers and Polymer Composites 29:5, pages 343-353.
Crossref
Crossref
Agbelenko Koffi, Fayçal Mijiyawa, Demagna Koffi, Fouad Erchiqui & Lotfi Toubal. (2021) Mechanical Properties, Wettability and Thermal Degradation of HDPE/Birch Fiber Composite. Polymers 13:9, pages 1459.
Crossref
Crossref
Rabboni Mike Government, Edozie Thompson Okeke, Julius Thaddaeus & Okechukwu Dominic Onukwuli. (2021) Optimization of flexural and impact properties of r-LDPE-DPWF composite for printer parts production. Materials Testing 63:4, pages 373-378.
Crossref
Crossref
Fazhi Lin, Huanbo Wang, Tianqi Yue, Pingping Qiu & Tian Liu. (2020) Inner defects elimination and significant reinforcement of rice straw/high‐density polyethylene composites by extractives removal process. Journal of Applied Polymer Science 138:14.
Crossref
Crossref
Rabboni Mike Government, Edozie Thompson Okeke, Azeez Taofik Oladimeji, Amechi Kingsley Ani, Okechukwu Dominic Onukwuli & Raphael Stone Odera. (2021) Effect of using different chemically modified breadfruit peel fiber in the reinforcement of LDPE composite. Materials Testing 63:3, pages 286-292.
Crossref
Crossref
Kishor Biswas, Vinay Khandelwal & Sourindra Nath Maiti. (2020)
Rheological properties of teak wood flour reinforced
HDPE
and maize starch composites
. Journal of Applied Polymer Science 138:8.
Crossref
Crossref
Agbelenko Koffi, Demagna Koffi & Lotfi Toubal. (2021) Mechanical properties and drop-weight impact performance of injection-molded HDPE/birch fiber composites. Polymer Testing 93, pages 106956.
Crossref
Crossref
Haitao Fu, Mengyuan Dun, Haigang Wang, Weihong Wang, Rongxian Ou, Yonggui Wang, Tian Liu & Qingwen Wang. (2020) Creep response of wood flour-high-density polyethylene/laminated veneer lumber coextruded composites. Construction and Building Materials 237, pages 117499.
Crossref
Crossref
Xiaolong Hao, Haiyang Zhou, Binshan Mu, Lei Chen, Qiong Guo, Xin Yi, Lichao Sun, Qingwen Wang & Rongxian Ou. (2020) Effects of fiber geometry and orientation distribution on the anisotropy of mechanical properties, creep behavior, and thermal expansion of natural fiber/HDPE composites. Composites Part B: Engineering 185, pages 107778.
Crossref
Crossref
Xiaolong Hao, Xin Yi, Lichao Sun, Dengyun Tu, Qingwen Wang & Rongxian Ou. (2019) Mechanical properties, creep resistance, and dimensional stability of core/shell structured wood flour/polyethylene composites with highly filled core layer. Construction and Building Materials 226, pages 879-887.
Crossref
Crossref
Ali Durmus, Mehmet Ozcan & Ismail Aydin. (2018) Quantifying effects of compositional variations on microstructural properties of polypropylene-wood fiber composites by melt rheology and tensile test data. Journal of Composite Materials 53:4, pages 503-514.
Crossref
Crossref
Lakin N. Phillips, Keerti S. Kappagantula & Jason P. Trembly. (2017) Mechanical performance of thermoplastic composites using bituminous coal as filler: Study of a potentially sustainable end‐use application for Appalachian coal. Polymer Composites 40:2, pages 591-599.
Crossref
Crossref
Mohammad ZR Khan, Sunil K Srivastava & MK Gupta. (2018) Tensile and flexural properties of natural fiber reinforced polymer composites: A review. Journal of Reinforced Plastics and Composites 37:24, pages 1435-1455.
Crossref
Crossref
Fatima Ezzahra Hanana, Dέsirέ Yomeni Chimeni & Denis Rodrigue. (2018) Morphology and Mechanical Properties of Maple Reinforced LLDPE Produced by Rotational Moulding: Effect of Fibre Content and Surface Treatment. Polymers and Polymer Composites 26:4, pages 299-308.
Crossref
Crossref
Mahendra R. Nevare, Pyus D. Tatiya, Pramod P. Mahulikar & Vikas V. Gite. (2016) Effect of maleated polypropylene as a compatibilizer and hyperbranched polyester as a processing aid on polypropylene‐wood flour biocomposites. Journal of Vinyl and Additive Technology 24:2, pages 179-184.
Crossref
Crossref
Samuel Chaudemanche, Arnaud Perrot, Sylvie Pimbert, Thibaut Lecompte & Florent Faure. (2018) Properties of an industrial extruded HDPE-WPC: The effect of the size distribution of wood flour particles. Construction and Building Materials 162, pages 543-552.
Crossref
Crossref
Chainarong Srivabut, Thanate Ratanawilai & Salim Hiziroglu. (2018) Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiber. Construction and Building Materials 162, pages 450-458.
Crossref
Crossref
Ertuğrul Altuntaş, Esra Yılmaz & Tufan Salan. (2017) Investigation of the effect of high-fibrous filling material on the mechanical properties of wood plastic composites. Turkish Journal of Forestry | Türkiye Ormancılık Dergisi 18:3, pages 258-263.
Crossref
Crossref
Shamsul Haq & Rajeev Srivastava. (2016) Wood Polypropylene (PP) Composites Manufactured by Mango Wood Waste with Virgin or Recycled PP: Mechanical, Morphology, Melt Flow Index and Crystalline Behaviour. Journal of Polymers and the Environment 25:3, pages 640-648.
Crossref
Crossref
Wendy Rodriguez-CastellanosDenis Rodrigue. (2017) Auto-hybridization of Polyethylene/Maple Composites: The Effect of Fiber Size and Concentration. Polymers and Polymer Composites 25:6, pages 471-482.
Crossref
Crossref
Ana Ferrer Carrera. 2017. Handbook of Nanocellulose and Cellulose Nanocomposites. Handbook of Nanocellulose and Cellulose Nanocomposites
335
364
.
Jaymin R. Desai, S. C. Shit & S. K. Jain. (2016) Analysis of 3-methacryloxypropyl trimethoxysilane treated cenosphere inclusion on dynamic mechanical properties of ABS composites. International Journal of Plastics Technology 20:2, pages 241-248.
Crossref
Crossref
Cihat Tascioglu, Mursit Tufan, Mesut Yalcin & Selim Sen. (2016) Determination of biological performance, dimensional stability, mechanical and thermal properties of wood–plastic composites produced from recycled chromated copper arsenate-treated wood. Journal of Thermoplastic Composite Materials 29:11, pages 1461-1479.
Crossref
Crossref
Jaymin R. Desai, S. C. Shit & S. K. Jain. (2014) Studies on thermal, electrical and flame properties of surface modified cenosphere filled ABS composites. International Journal of Plastics Technology 18:3, pages 390-396.
Crossref
Crossref
Hongli Zhang. (2014) Effect of a novel coupling agent, alkyl ketene dimer, on the mechanical properties of wood–plastic composites. Materials & Design 59, pages 130-134.
Crossref
Crossref
Yali Li. (2014) Characterization of acetylated eucalyptus wood fibers and its effect on the interface of eucalyptus wood/polypropylene composites. International Journal of Adhesion and Adhesives 50, pages 96-101.
Crossref
Crossref