Advanced search
Publication Cover
Chemical Engineering Communications Volume 201, 2014 - Issue 9
Submit an article Journal homepage
411
Views
14
CrossRef citations to date
0
Altmetric
Original Articles

CFD SIMULATION OF ECAE THROUGH A MULTIPLE-ANGLE DIE WITH A MOVABLE INLET WALL

Alexander V. Perig Manufacturing Processes and Automation Engineering Department, Donbass State Engineering Academy, Kramatorsk, UkraineCorrespondence[email protected]
&
Nikolai N. Golodenko Department of Water Supply, Water Disposal and Water Resources Protection, Donbass National Academy of Civil Engineering and Architecture, Makeyevka, Ukraine
Pages 1221-1239 | Published online: 01 May 2014

Citations (14)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (3)

Pavlo A. Gavrish, Mikhail A. Turchanin & Alexander V. Perig. (2021) Analysis of the reasons for the penetration of copper into steel during welding. Advances in Materials and Processing Technologies 7:3, pages 363-379.
Read now
Pavlo A. Gavrish & Alexander V. Perig. (2020) Improvement of the heat state in welding copper with steel. Advances in Materials and Processing Technologies 6:4, pages 703-717.
Read now
Alexander V. Perig & Nikolai N. Golodenko. (2019) CFD-enhanced description of local viscous flow through expansion equal channel angular extrusion geometric domain. Advances in Materials and Processing Technologies 5:4, pages 617-644.
Read now

Articles from other publishers (11)

Alexander V. Perig, Anatoliy V. Zavdoveev, Violetta M. Skyrtach, Oleksii D. Kovalov, Boshra A. Arnout, Vuk Uskoković, Pavlo A. Gavrish, Oleh D. Hanevych, Bohdan Yu. Sharapaniuk, Alexander A. Kostikov & Oleg V. Subotin. (2021) Materials extrusion-inspired engineering reflection of social pressure-induced environmental impact on academy community well-being. Work 68:2, pages 333-352.
Crossref
Anastasiia V. Liuta, Alexander V. Perig, Marharyta A. Afanasieva & Violetta M. Skyrtach. (2019) Didactic games as student-friendly tools for learning hydraulics in a technical university’s undergraduate curriculum. Industry and Higher Education 33:3, pages 198-213.
Crossref
Alexander V. Perig & Nikolai N. Golodenko. (2017) 2D CFD description of the kinematic effects of movable inlet and outlet die wall transport motion and punch shape geometry on the dynamics of viscous flow during ECAE through Segal 2θ-dies for a range of channel angles. AIMS Materials Science 4:6, pages 1240-1275.
Crossref
Alexander V. Perig & Nikolai N. Golodenko. (2017) Effects of Material Rheology and Die Walls Translational Motions on the Dynamics of Viscous Flow during Equal Channel Angular Extrusion through a Segal 2 θ -Die: CFD 2D Solution of a Curl Transfer Equation . Advances in Materials Science and Engineering 2017, pages 1-26.
Crossref
Alexander V Perig & Nikolai N Golodenko. (2016) Effect of workpiece viscosity on strain unevenness during equal channel angular extrusion: CFD 2D solution of Navier–Stokes equations for the physical variables ‘flow velocities—punching pressure’. Materials Research Express 3:11, pages 115301.
Crossref
Eduard P. Gribkov & Alexander V. Perig. (2016) Research of energy-power parameters during powder wire flattening. The International Journal of Advanced Manufacturing Technology 85:9-12, pages 2887-2900.
Crossref
Alexander V. Perig & Nikolai N. Golodenko. (2016) CFD 2D Description of Local Flow of Polymer Workpiece through a modified U-Shaped Die During Equal Channel Multiple Angular Extrusion. Materials Research 19:3, pages 602-610.
Crossref
Alexander Perig. (2015) Two-parameter Rigid Block Approach to Upper Bound Analysis of Equal Channel Angular Extrusion Through a Segal 2θ-die. Materials Research 18:3, pages 628-638.
Crossref
A. V. Perig & N. N. Golodenko. (2015) ECAP process improvement based on the design of rational inclined punch shapes for the acute-angled Segal 2θ-dies: CFD 2-D description of dead zone reduction. Mechanical Sciences 6:1, pages 41-49.
Crossref
Eduard P. Gribkov, Alexander V. Perig & Viktoriya A. Danilyuk. (2014) Research into the process of producing powder tapes. The International Journal of Advanced Manufacturing Technology 77:5-8, pages 1087-1104.
Crossref
Alexander V. Perig. (2014) 2D upper bound analysis of ECAE through 2θ-dies for a range of channel angles. Materials Research 17:5, pages 1226-1237.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.