Citations (74)
Keep up to date with the latest research on this topic with citation updates for this article.
Articles from other publishers (74)
Reinhard Langer, Richard Garner, Irina Paul, Siegfried Horn & Reinhard Tidecks. (2016) Cold starting of fluorescent lamps – part I: a description of the transient regime. The European Physical Journal Applied Physics 76:1, pages 10802.
Crossref
Crossref
J. de P. Lopes, M. F. Menke, F. E. Bisogno, R. N. do Prado, J. Ribas, J. M. Alonso & A. R. Seidel. (2012) Automatic lamp detection technique for fluorescent lamps electronic ballasts. Automatic lamp detection technique for fluorescent lamps electronic ballasts.
Wei Xiong & Ana V. Stankovic. (2012) A universal programmed start dimming ballast platform. A universal programmed start dimming ballast platform.
J. P. de Lopes, M. F. da Silva, Marco A. Dalla Costa, F. E. Bisogno, Ricardo N. do Prado & Álysson R. Seidel. (2012) Feedforward Regulation Method for Self-Oscillating Electronic Ballast for Fluorescent Lamps. IEEE Transactions on Industrial Electronics 59:4, pages 1869-1878.
Crossref
Crossref
Hung-Liang Cheng & Yung-Hsin Huang. (2010) Design and Implementation of Dimmable Electronic Ballast for Fluorescent Lamps Based on Power-Dependent Lamp Model. IEEE Transactions on Plasma Science 38:7, pages 1644-1650.
Crossref
Crossref
Chin Sien Moo, Kuo Hsing Lee, Hung Liang Cheng & Wei Ming Chen. (2009) A Single-Stage High-Power-Factor Electronic Ballast With ZVS Buck–Boost Conversion. IEEE Transactions on Industrial Electronics 56:4, pages 1136-1146.
Crossref
Crossref
Ying-Chun Chuang, Chin-Sien Moo, Hsien-Wen Chen & Tsai-Fu Lin. (2009) A Novel Single-Stage High-Power-Factor Electronic Ballast With Boost Topology for Multiple Fluorescent Lamps. IEEE Transactions on Industry Applications 45:1, pages 323-331.
Crossref
Crossref
Lucas B. Oliveira, Guilherme S. Oliveira, Jackson Piazza, Murilo Cervi, Ricardo N. Prado & Alysson R. Seidel. (2008) Fixed Frequency Self-Oscillating Electronic Ballast Design Procedure. Fixed Frequency Self-Oscillating Electronic Ballast Design Procedure.
Claudinor Bitencourt Nascimento & Arnaldo Jos� Perin. (2008) High Power Factor Electronic Ballast for Fluorescent Lamps With Reduced Input Filter and Low Cost of Implementation. IEEE Transactions on Industrial Electronics 55:2, pages 711-721.
Crossref
Crossref
Ying-Chun Chuang, Yu-Lung Ke & Hung-Shiang Chuang. (2007) Battery-Operated Electronic Ballast of Fluorescent Lamps for Photovoltaic Applications. Battery-Operated Electronic Ballast of Fluorescent Lamps for Photovoltaic Applications.
Ying-Chun Chuang & Hsien-Wen Chen. (2007) A Novel Single-Stage High-Power-Factor Electronic Ballast with Boost Topology for Multiple Fluorescent Lamps. A Novel Single-Stage High-Power-Factor Electronic Ballast with Boost Topology for Multiple Fluorescent Lamps.
Ying-Chun Chuang & Hung-Liang Cheng. (2007) Single-Stage Single-Switch High-Power-Factor Electronic Ballast for Fluorescent Lamps. IEEE Transactions on Industry Applications 43:6, pages 1434-1440.
Crossref
Crossref
Alysson Raniere Seidel, Fabio Ecke Bisogno & Ricardo Nederson do Prado. (2007) A Design Methodology for a Self-Oscillating Electronic Ballast. IEEE Transactions on Industry Applications 43:6, pages 1524-1533.
Crossref
Crossref
Yuming Chen & Dahua Chen. (2006) Simulation the Impedance of Electrodeless Fluoresent Lamp. Simulation the Impedance of Electrodeless Fluoresent Lamp.
Claudinor B. Nascimento, Joabel Moia & Arnaldo José Perin. (2006) A voltage source charge pump power factor correction electronic ballast for fluorescent lamp with no start-up capacitor. A voltage source charge pump power factor correction electronic ballast for fluorescent lamp with no start-up capacitor.
Ying-Chun Chuang & Hung-Liang Cheng. (2006) Single-Stage Single-Switch High-Power-Factor Electronic Ballast for Fluorescent Lamps. Single-Stage Single-Switch High-Power-Factor Electronic Ballast for Fluorescent Lamps.
M.A. Dalla Costa & R. Nederson do Prado. (2005) High Power Factor Self-Oscillating Electronic Ballast to Supply Four Fluorescent Lamps. IEEE Latin America Transactions 3:2, pages 165-171.
Crossref
Crossref
C.B. Nascimento, E.I. Pereira & A.J. Perin. (2005) Low Cost High Power Factor Electronic Ballast with No Input Filter. Low Cost High Power Factor Electronic Ballast with No Input Filter.
Yong N. Chang, Chee S. Lam, Chin S. Moo & Hau C. Yen. (2005) Electronic Ballast with Multi-phase Outputs for Fluorescent Lighting. Electronic Ballast with Multi-phase Outputs for Fluorescent Lighting.
A. Campos, M.A.D. Costa, R.A. Pinto & R.N. Prado. (2004) Fixed frequency self-oscillating electronic ballast to supply multiple lamps. Fixed frequency self-oscillating electronic ballast to supply multiple lamps.
A.R. Seidel, F.E. Bisogno, H. Pinheiro & R.N. do Prado. (2003) Self-oscillating dimmable electronic ballast. IEEE Transactions on Industrial Electronics 50:6, pages 1267-1274.
Crossref
Crossref
H.L. Cheng, C.S. Moo & W.M. Chen. (2003) A novel single-stage high-power-factor electronic ballast with symmetrical topology. IEEE Transactions on Industrial Electronics 50:4, pages 759-766.
Crossref
Crossref
C.S. Moo, T.F. Lin & Y.C. Chuang. (2003) Electronic ballast for operating fluorescent lamps over wide temperature range. IEE Proceedings - Electric Power Applications 150:2, pages 153.
Crossref
Crossref
M.A. Dalla Costa, A.R. Seidel, F.E. Bisogno & R.N. do Prado. (2002) Self-oscillating dimmable electronic ballast to supply two independent lamps. Self-oscillating dimmable electronic ballast to supply two independent lamps.
L.H. Hwang, J.H. Yoo, J.R. Kim, E.S. Jang, C.S. Lee, M.T. Cho & J.S. Kim. (2002) A study on the T5 fluorescent lamp ballast used contour vibration mode piezoelectric transformer using a one-chip microcontroller. A study on the T5 fluorescent lamp ballast used contour vibration mode piezoelectric transformer using a one-chip microcontroller.
M. Cervi, A.R. Seidel, F.E. Bisogno & R.N. do Prado. (2002) Fluorescent lamp model based on the equivalent resistance variation. Fluorescent lamp model based on the equivalent resistance variation.
A.L. Michel, D. Pappis, A. Campos & R.N. do Prado. (2002) Electronic ballast with automatic luminous variation and presence detection using microcontroller and self-oscillating command. Electronic ballast with automatic luminous variation and presence detection using microcontroller and self-oscillating command.
M.A.D. Costa, A.R. Seidel, F.E. Bisogno & R.N. do Prado. (2002) Self-oscillating dimmable electronic ballast to supply two independent lamps. Self-oscillating dimmable electronic ballast to supply two independent lamps.
S. Ben-Yaakov, M. Shvartsas & J. Lester. (2002) A behavioral SPICE compatible model of an electrodeless fluorescent lamp. A behavioral SPICE compatible model of an electrodeless fluorescent lamp.
H.L. Cheng, C.S. Moo & W.M. Chen. (2001) A novel single-stage high-power-factor electronic ballast with symmetrical topology. A novel single-stage high-power-factor electronic ballast with symmetrical topology.
A.R. Seidel, F.E. Bisogno, R.N. Prado, H. Pinheiro & R.K. Pavao. (2001) Self-oscillating dimmable electronic ballast. Self-oscillating dimmable electronic ballast.
R.K. Pavao, F.E. Bisogno, A.R. Seidel & R.N. do Prado. (2001) Self-oscillating electronic ballast design based on the point of view of control system. Self-oscillating electronic ballast design based on the point of view of control system.
S. Ben-Yaakov & M. Shvartsas. (2001) An electronic ballast for fluorescent lamps with no series passive elements. An electronic ballast for fluorescent lamps with no series passive elements.
C.S. Moo, T.F. Lin & Y.C. Hsieh. (2001) Single-stage high power factor electronic ballast for fluorescent lamps with constant power operation. IEE Proceedings - Electric Power Applications 148:5, pages 465.
Crossref
Crossref
C.S. Moo, H.L. Cheng & Y.N. Chang. (2001) Single-stage high-power-factor dimmable electronic ballast with asymmetrical pulse-width-modulation for fluorescent lamps. IEE Proceedings - Electric Power Applications 148:2, pages 125.
Crossref
Crossref
R.N. do Prado, A.R. Seidel, F.E. Bisogno & M.A.D. Costa. (2000) A design method for electronic ballast for fluorescent lamps. A design method for electronic ballast for fluorescent lamps.
C.S. Moo, H.L. Cheng & Y.N. Chang. (2000) A single-stage high-power-factor dimmable electronic ballast with asymmetrical pulse-width-modulation for fluorescent lamps. A single-stage high-power-factor dimmable electronic ballast with asymmetrical pulse-width-modulation for fluorescent lamps.
C.S. Moo, T.F. Lin & Y.C. Chuang. (2000) An electronic ballast for operating fluorescent lamps in wide temperature range. An electronic ballast for operating fluorescent lamps in wide temperature range.
S. A. El‐Hamamsy & M. H. Kheraluwala. 2000. Wiley Encyclopedia of Electrical and Electronics Engineering. Wiley Encyclopedia of Electrical and Electronics Engineering.
C.S. Moo, H.L. Cheng, T.F. Lin & H.C. Yen. (1999) Designing a dimmable electronic ballast with voltage control for fluorescent lamp. Designing a dimmable electronic ballast with voltage control for fluorescent lamp.
C.S. Moo, H.L. Cheng, H.N. Chen & H.C. Yen. (1999) Designing dimmable electronic ballast with frequency control. Designing dimmable electronic ballast with frequency control.
R.N.D. Prado & S.A. Bonafldo. (1999) A high-power-factor electronic ballast using a flyback push-pull integrated converter. IEEE Transactions on Industrial Electronics 46:4, pages 796-802.
Crossref
Crossref
C.S. Moo, Y.C. Chuang & C.R. Lee. (1998) A new power-factor-correction circuit for electronic ballasts with series-load resonant inverter. IEEE Transactions on Power Electronics 13:2, pages 273-278.
Crossref
Crossref
C. Brafias, F.J. Azcondo & S. Bracho. (1998) PWM control of electronic ballast for high-pressure Na lamps in comparison to fluorescent lamps. Introduction to quasi-optimum control. PWM control of electronic ballast for high-pressure Na lamps in comparison to fluorescent lamps. Introduction to quasi-optimum control.
R.N. do Prado, S.A. Bonalso & D.S. Greff. (1998) A high power factor flyback-half-bridge converter for fluorescent lighting. A high power factor flyback-half-bridge converter for fluorescent lighting.
C.S. Moo, S.Y. Chan & C.R. Lee. (1997) A single-stage high power factor electronic ballast with duty-ratio controlled series resonant inverter. A single-stage high power factor electronic ballast with duty-ratio controlled series resonant inverter.
T.J. Liang, T.S. Liu & F.J. Chang. (1997) Design and analysis of dimming electronic ballast. Design and analysis of dimming electronic ballast.
C. Branas, F.J. Azcondo & S. Bracho. (1997) Pulsewidth modulation control of electronic ballast for dimming control of fluorescent lamps. Pulsewidth modulation control of electronic ballast for dimming control of fluorescent lamps.
Zhi Li, P.K.T. Mok, Wing-Hung Ki & J.K.O. Sin. (1997) A simple method to design resonant circuits of electronic ballast for fluorescent lamps. A simple method to design resonant circuits of electronic ballast for fluorescent lamps.
R.N. de Prado, S.A. Bonaldo, D.S. Greff & F.E. Bisogno. (1997) A unity power factor electronic ballast for fluorescent lighting. A unity power factor electronic ballast for fluorescent lighting.
T. Leyh & S. Fancher. (1997) Fluorescent lamp high frequency evaluation. Fluorescent lamp high frequency evaluation.
S. Ben-Yaakov & M. Gulko. (1997) Design and performance of an electronic ballast for high-pressure sodium (HPS) lamps. IEEE Transactions on Industrial Electronics 44:4, pages 486-491.
Crossref
Crossref
S. Kataoka & K. Atagi. (1997) Preventing IR interference between infrared waves emitted by high-frequency fluorescent lighting systems and infrared remote controls. IEEE Transactions on Industry Applications 33:1, pages 239-245.
Crossref
Crossref
R.N. do Prado, S.A. Bonaldo, M.C. Moreira & D.L.R. Vidor. (1996) Electronic ballast with a high power factor for fluorescent lamps. Electronic ballast with a high power factor for fluorescent lamps.
Yong-Sik Youn & Gyu-Hyeong Cho. (1996) Regenerative signal amplifying gate driver of self-excited electronic ballast for high pressure sodium (HPS) lamp. Regenerative signal amplifying gate driver of self-excited electronic ballast for high pressure sodium (HPS) lamp.
C.S. Moo, Y.C. Chuang, Y.H. Huang & H.N. Chen. (1996) Modeling of fluorescent lamps for dimmable electronic ballasts. Modeling of fluorescent lamps for dimmable electronic ballasts.
C.S. Moo, Y.C. Chuang & C.R. Lee. (1996) A new power factor correction circuit for electronic ballasts with series-load resonant inverter. A new power factor correction circuit for electronic ballasts with series-load resonant inverter.
U. Mader. (1996) Steady-state analysis of a voltage-fed inverter with second-order network and fluorescent lamp load. Steady-state analysis of a voltage-fed inverter with second-order network and fluorescent lamp load.
J.P. Agrawal, O. Farook, C.R. Sekhar & M.A. Schurman. (1995) A high efficiency and high power factor electronic ballast using ZVS-PLR inverter. A high efficiency and high power factor electronic ballast using ZVS-PLR inverter.
C.S. Moo, Y.C. Chuang & J.C. Lee. (1995) A new dynamic filter for the electronic ballast with the parallel-load resonant inverter. A new dynamic filter for the electronic ballast with the parallel-load resonant inverter.
S. Ben-Yaakov & M. Gulko. (1995) Design and performance of an electronic ballast for high pressure sodium (HPS) lamps. Design and performance of an electronic ballast for high pressure sodium (HPS) lamps.
S. Kataoka & K. Atagi. (1995) Prevention of IR interference from high frequency fluorescent lighting to IR remote-control systems. Prevention of IR interference from high frequency fluorescent lighting to IR remote-control systems.
S. Ben-Yaakov & M. Gulko. (1995) Design and performance of an electronic ballast for high pressure sodium (HPS) lamps. Design and performance of an electronic ballast for high pressure sodium (HPS) lamps.
T.-H. Yu, H.-M. Huang & T.-F. Wu. (1995) Self excited half-bridge series resonant parallel loaded fluorescent lamp electronic ballasts. Self excited half-bridge series resonant parallel loaded fluorescent lamp electronic ballasts.
M. Gulko & S. Ben-Yaakov. (1994) Current-sourcing push-pull parallel-resonance inverter (CS-PPRI): theory and application as a discharge lamp driver. IEEE Transactions on Industrial Electronics 41:3, pages 285-291.
Crossref
Crossref
T.-F. Wu, T.-H. Yu & H.-M. Huang. (1994) Complete analysis and performance-characteristic compromise for self-excited half-bridge parallel resonant electronic ballasts. Complete analysis and performance-characteristic compromise for self-excited half-bridge parallel resonant electronic ballasts.
T.-H. Yu, L.-M. Wu & T.-F. Wu. (1994) Comparisons among self-excited parallel resonant, series resonant and current-fed push-pull electronic ballasts. Comparisons among self-excited parallel resonant, series resonant and current-fed push-pull electronic ballasts.
M.C. Cosby & R.M. Nelms. (1994) A resonant inverter for electronic ballast applications. IEEE Transactions on Industrial Electronics 41:4, pages 418-425.
Crossref
Crossref
W.R. Alling. (1993) Preserving lamp life using a low cost elctronic ballast with compact fluorescent lamps, a new approach. Preserving lamp life using a low cost elctronic ballast with compact fluorescent lamps, a new approach.
M.C. Cosby & R.M. Nelms. (1993) Designing a parallel-loaded resonant inverter for an electronic ballast using the fundamental approximation. Designing a parallel-loaded resonant inverter for an electronic ballast using the fundamental approximation.
M. Gulko & S. Ben-Yaakov. (1993) Current-sourcing push-pull parallel-resonance inverter (CS-PPRI): theory and application as a fluorescent lamp driver. Current-sourcing push-pull parallel-resonance inverter (CS-PPRI): theory and application as a fluorescent lamp driver.
E.E. Hammer. (1990) Starting voltage characteristics of 40-W biaxial fluorescent lamps. IEEE Transactions on Industry Applications 26:3, pages 498-502.
Crossref
Crossref
W.R. Alling. (1989) Important design parameters for solid-state ballasts. IEEE Transactions on Industry Applications 25:2, pages 203-207.
Crossref
Crossref
E.E. Hammer. (1988) Starting voltage characteristics of 40 W biaxial fluorescent lamps. Starting voltage characteristics of 40 W biaxial fluorescent lamps.