Citations (172)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (16)
Li Yi, Shang Xuekun, Guan Qingwen & He Binbin. (2023) Strong and ductile medium manganese steel processed by low-temperature partitioning. Materials Science and Technology 39:10, pages 1214-1222.
Read now
Read now
S. Pan & B.B. He. (2021) The respective strain hardening of constituting phases during Lüders deformation of a medium-Mn steel. Philosophical Magazine Letters 101:5, pages 211-221.
Read now
Read now
B. B. He, M. Wang, L. Liu & M. X. Huang. (2019) High-strength medium Mn quenching and partitioning steel with low yield ratio. Materials Science and Technology 35:17, pages 2109-2114.
Read now
Read now
Yan Li, Wei Ding & Baofeng Wang. (2019) Intercritical annealing pre-treatment used in a hot-dip galvanised TRIP steel. Materials Science and Technology 35:11, pages 1372-1380.
Read now
Read now
M. Ghasri-Khouzani & J. R. McDermid. (2017) Microstructural evolution and mechanical behaviour of Fe-30Mn-C steels with various carbon contents. Materials Science and Technology 33:10, pages 1159-1170.
Read now
Read now
H. S. Zhao, W. Li, X. Zhu, X. H. Lu, L. Wang, S. Zhou & X. J. Jin. (2016) Quantitative assessment of retained austenite in quenching and partitioning treated multiphase steel. Materials Science and Technology 32:15, pages 1619-1624.
Read now
Read now
S. Li, P. Honarmandi, R. Arróyave & P. E. J. Rivera-Diaz-del-Castillo. (2015) Describing the deformation behaviour of TRIP and dual phase steels employing an irreversible thermodynamics formulation. Materials Science and Technology 31:13, pages 1658-1663.
Read now
Read now
S. Neelakantan, D. San Martin, P. E. J. Rivera-Díaz-del-Castillo & S. van der Zwaag. (2009) Plasticity induced transformation in a metastable β Ti-1023 alloy by controlled heat treatments. Materials Science and Technology 25:11, pages 1351-1358.
Read now
Read now
K. P. Das, S. Ganguly, P. P. Chattopadhyay, S. Tarafder & N. R. Bandyopadhyay. (2008) Exploring the Possibilities of Development of Directly Quenched TRIP-Aided Steel by the Artificial Neural Networks (ANN) Technique. Materials and Manufacturing Processes 24:1, pages 68-77.
Read now
Read now
S. Ganguly, S. Datta, P. P. Chattopadhyay & N. Chakraborti. (2008) Designing the Multiphase Microstructure of Steel for Optimal TRIP Effect: A Multiobjective Genetic Algorithm Based Approach. Materials and Manufacturing Processes 24:1, pages 31-37.
Read now
Read now
A. S. J. Suiker & S. Turteltaub. (2007) Crystalline damage growth during martensitic phase transformations. Philosophical Magazine 87:32, pages 5033-5063.
Read now
Read now
S. Chatterjee & H. K. D. H. Bhadeshia. (2007) Transformation induced plasticity assisted steels: stress or strain affected martensitic transformation?. Materials Science and Technology 23:9, pages 1101-1104.
Read now
Read now
S. Chatterjee, M. Murugananth & H. K. D. H. Bhadeshia. (2007)
δ TRIP steel. Materials Science and Technology 23:7, pages 819-827.
Read now
Read now
P. J. Jacques, Q. Furnemont, S. Godet, T. Pardoen, K. T. Conlon & F. Delannay. (2006) Micromechanical characterisation of TRIP-assisted multiphase steels by in situ neutron diffraction. Philosophical Magazine 86:16, pages 2371-2392.
Read now
Read now
M. Y. Sherif, C. Garcia Mateo, T. Sourmail & H. K. D. H. Bhadeshia. (2004) Stability of retained austenite in TRIP-assisted steels. Materials Science and Technology 20:3, pages 319-322.
Read now
Read now
Q. Furnémont, G. Lacroix, S. Godet, K.T. Conlon & P.J. Jacques. (2004) Critical Assessment of the Micromechanical Behaviour of Dual Phase and Trip-Assisted Multiphase Steels. Canadian Metallurgical Quarterly 43:1, pages 35-42.
Read now
Read now
Articles from other publishers (156)
Meng-wei Lu, Xin Chen, Wen-xi Liu, Yu-ru Chen, Qi Li, Kai Wang, Zu-min Wang & Yuan Huang. (2024) Mechanisms of strength–plasticity enhancement and stress-induced phase transition in a medium-carbon low-alloy steel. Journal of Iron and Steel Research International.
Crossref
Crossref
Yindong Shi, Aojie Zhang, Shunxing Liang, Xiliang Zhang, Shuai Ren, Hongji Liu, Dong Xu, Xinrui Yang, Zhenguo Xing & Lina Wang. (2024) Activation of multiple deformation mechanisms and HDI hardening devoting to significant work-hardening of gradient-dislocation structured TRIP steel. Materials Science and Engineering: A 893, pages 146131.
Crossref
Crossref
Joshua Kumpati, Sk. Md. Hasan, Manon Bonvalet Rolland & Annika Borgenstam. (2023) Deconstructing the Retained Austenite Stability: A Comparative Study of Two-Phase and Bulk Microstructures. Metallurgical and Materials Transactions A 55:2, pages 466-476.
Crossref
Crossref
Deepak Kumar, Indrani Sen & Tapas Kumar Bandyopadhyay. (2023) A Systematic Review of Medium‐Mn Steels with an Assessment of Fatigue Behavior. steel research international 95:2.
Crossref
Crossref
Harshad K.D.H. Bhadeshia & Robert W.K. Honeycombe. 2024. Steels. Steels
279
306
.
Chang-Gon Jeong, T.T.T. Trang, Youngyun Woo, Eun Yoo Yoon, Youngseon Lee & Yoon-Uk Heo. (2023) Effect of cooling rate on the final microstructure and tensile property in an Fe–Mn–Si–C-based multiphase TRIP steel. Materials Science and Engineering: A 887, pages 145696.
Crossref
Crossref
Jun Zhang, Binhan Sun, Zhigang Yang, Chi Zhang & Hao Chen. (2022) Enhancing the Hydrogen Embrittlement Resistance of Medium Mn Steels by Designing Metastable Austenite with a Compositional Core–shell Structure. Acta Metallurgica Sinica (English Letters) 36:7, pages 1059-1077.
Crossref
Crossref
Jingru Yan, Muyuan Zhou, Hui Wu, Xiaojun Liang, Zhao Xing, Hongbin Li, Liang Zhao, Sihai Jiao & Zhengyi Jiang. (2023) A Review of Key Factors Affecting the Wear Performance of Medium Manganese Steels. Metals 13:7, pages 1152.
Crossref
Crossref
Novin Rasooli, Hassan Shirazi & Mahmoud Nili-Ahmadabadi. (2023) Significance of Mn concentration on aging behavior, microstructure evolution and mechanical properties of Fe–Ni–Mn alloys. Journal of Materials Research and Technology 24, pages 1-15.
Crossref
Crossref
Ali Khajesarvi, Seyyed Sadegh Ghasemi Banadkouki, Seyed Abdolkarim Sajjadi & Mahesh C. Somani. (2023) Abnormal Trend of Ferrite Hardening in a Medium-Si Ferrite-Martensite Dual Phase Steel. Metals 13:3, pages 542.
Crossref
Crossref
Yi Li, Qingwen Guan & Binbin He. (2023) Improving the strength and ductility of medium Mn steel by depleting the stress-assisted martensite. Scripta Materialia 226, pages 115267.
Crossref
Crossref
Bao-Guang Zhang, Xiao-Ming Zhang, Hua-Bing Li & Hai-Tao Liu. (2022) Microstructure Characteristics, Mechanical Properties and Strain Hardening Behavior of Nitrogen-Bearing Fe-0.2 C-5Mn TRIP Steel. Metals and Materials International 29:3, pages 607-617.
Crossref
Crossref
Wei Zhang, Jiajia Shen, J.P. Oliveira, Bart J. Kooi & Yutao Pei. (2023) Crystallographic orientation-dependent deformation characteristics of additive manufactured interstitial-strengthened high entropy alloys. Scripta Materialia 222, pages 115049.
Crossref
Crossref
M. Polyakova, D. Konstantinov, A. Korchunov & M. Dabala’. 2023. Proceedings of the 8th International Conference on Industrial Engineering. Proceedings of the 8th International Conference on Industrial Engineering
196
206
.
A. Varshney. (2022) Effect of Post-austempering Cold Work on Thermal Stability of Retained Austenite and Mechanical Properties of Medium Carbon High Silicon Multiphase Steels. Journal of Materials Engineering and Performance 31:11, pages 9492-9503.
Crossref
Crossref
X. He, Y. P. Ye & B. B. He. (2022) A review on the science of plastic deformation in laser-based additively manufactured steel. Journal of Materials Science 57:24, pages 10803-10835.
Crossref
Crossref
M.C. Niu, K. Yang, J.H. Luan, W. Wang & Z.B. Jiao. (2022) Cu-assisted austenite reversion and enhanced TRIP effect in maraging stainless steels. Journal of Materials Science & Technology 104, pages 52-58.
Crossref
Crossref
Kazi M. H. Bhadhon, Xiang Wang, Elizabeth A. McNally & Joseph R. McDermid. (2022) Effect of Intercritical Annealing Parameters and Starting Microstructure on the Microstructural Evolution and Mechanical Properties of a Medium-Mn Third Generation Advanced High Strength Steel. Metals 12:2, pages 356.
Crossref
Crossref
K.M.H. Bhadhon, X. Wang & J.R. McDermid. (2022) Effects of CGL-compatible thermal processing, starting microstructure, and Sn micro-alloying on the mechanical properties of a medium-Mn third generation advanced high strength steel. Materials Science and Engineering: A 833, pages 142563.
Crossref
Crossref
Tianyi Zhang, Quan Shan, Zulai Li, Hong Wu & Yehua Jiang. (2021) Effects of TiC and residual austenite synergistic strengthening mechanism on impact-abrasive wear behavior of bainite steel. Wear 486-487, pages 204088.
Crossref
Crossref
Josh J. Mueller, David K. Matlock, John G. Speer & Emmanuel De Moor. (2021) Diffusional and Partitionless Ferrite‐to‐Austenite Phase Transformations during Intercritical Annealing of Medium‐Mn Steels. steel research international 92:12.
Crossref
Crossref
Qingwen Guan, Wenjun Lu & Binbin He. (2021) Recent Progress in Understanding the Nano/Micro-Mechanical Behavior of Austenite in Advanced High Strength Steels. Metals 11:12, pages 1927.
Crossref
Crossref
Hui Xu, Wanlin Wang, Cheng Lu, Peisheng Lv & Chenyang Zhu. (2021) Evolution of solidification structure for Si–Mn bearing AHSS under typical cooling rates. Journal of Materials Research and Technology 15, pages 524-530.
Crossref
Crossref
Thomas Ferrand & Damien Deldicque. (2021) Reduced Viscosity of Mg2GeO4 with Minor MgGeO3 between 1000 and 1150 °C Suggests Solid-State Lubrication at the Lithosphere–Asthenosphere Boundary. Minerals 11:6, pages 600.
Crossref
Crossref
Yang Liu, Yan-hui Sun & Hao-tian Wu. (2021) Effects of chromium on the microstructure and hot ductility of Nb-microalloyed steel. International Journal of Minerals, Metallurgy and Materials 28:6, pages 1011-1021.
Crossref
Crossref
J.J. Mueller, X. Hu, X. Sun, Y. Ren, K. Choi, E. Barker, J.G. Speer, D.K. Matlock & E. De Moor. (2021) Austenite formation and cementite dissolution during intercritical annealing of a medium-manganese steel from a martensitic condition. Materials & Design 203, pages 109598.
Crossref
Crossref
Yuming Zou, Hua Ding & Zhengyou Tang. (2021) Effect of Carbon Content on Deformation Behavior and Partitioning of Manganese in Medium-Mn Steels. Metals 11:4, pages 667.
Crossref
Crossref
Sandra Ebner, Ronald Schnitzer, Emad Maawad, Clemens Suppan & Christina Hofer. (2021) Influence of partitioning parameters on the mechanical stability of austenite in a Q&P steel: A comparative in-situ study. Materialia 15, pages 101033.
Crossref
Crossref
D. Frómeta, A. Lara, L. Grifé, T. Dieudonné, P. Dietsch, J. Rehrl, C. Suppan, D. Casellas & J. Calvo. (2021) Fracture Resistance of Advanced High-Strength Steel Sheets for Automotive Applications. Metallurgical and Materials Transactions A 52:2, pages 840-856.
Crossref
Crossref
Zongbiao Dai, Hao Chen, Ran Ding, Qi Lu, Chi Zhang, Zhigang Yang & Sybrand van der Zwaag. (2021) Fundamentals and application of solid-state phase transformations for advanced high strength steels containing metastable retained austenite. Materials Science and Engineering: R: Reports 143, pages 100590.
Crossref
Crossref
D. Frómeta, N. Cuadrado, J. Rehrl, C. Suppan, T. Dieudonné, P. Dietsch, J. Calvo & D. Casellas. (2021) Microstructural effects on fracture toughness of ultra-high strength dual phase sheet steels. Materials Science and Engineering: A 802, pages 140631.
Crossref
Crossref
E. Polatidis, G.N. Haidemenopoulos, D. Krizan, N. Aravas, T. Panzner, M. Šmíd, I. Papadioti, N. Casati, S. Van Petegem & H. Van Swygenhoven. (2021) The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: Experimental investigation and modelling the transformation kinetics. Materials Science and Engineering: A 800, pages 140321.
Crossref
Crossref
Yan Li, Runxun Wang, Baofeng Wang & Wei Ding. (2020) Influence of silicon addition on intercritical annealing process and tensile properties of medium Mn steel. Journal of Materials Science 56:2, pages 1783-1793.
Crossref
Crossref
Maryam Soleimani, Alireza Kalhor & Hamed Mirzadeh. (2020) Transformation-induced plasticity (TRIP) in advanced steels: A review. Materials Science and Engineering: A 795, pages 140023.
Crossref
Crossref
Binbin He. (2020) On the Factors Governing Austenite Stability: Intrinsic versus Extrinsic. Materials 13:15, pages 3440.
Crossref
Crossref
S. Hossein Zadeh, H.R. Jafarian, N. Park & A.R. Eivani. (2020) Regulating of tensile properties through microstructure engineering in Fe-Ni-C TRIP steel processed by different strain routes of severe deformation. Journal of Materials Research and Technology 9:3, pages 2903-2913.
Crossref
Crossref
Riccardo Fincato, Seiichiro Tsutsumi, Tatsuo Sakai & Kenjiro Terada. (2020) 3D crystal plasticity analyses on the role of hard/soft inclusions in the local slip formation. International Journal of Fatigue 134, pages 105518.
Crossref
Crossref
Xiaohong Liu, Lele Liu, Fengli Sui, Hongyun Bi, E Chang & Moucheng Li. (2020) Influence of Cu on the microstructure and corrosion resistance of cold-rolled type 204 stainless steels. Journal of Solid State Electrochemistry 24:5, pages 1197-1206.
Crossref
Crossref
M. Wang & M.X. Huang. (2020) Abnormal TRIP effect on the work hardening behavior of a quenching and partitioning steel at high strain rate. Acta Materialia 188, pages 551-559.
Crossref
Crossref
M. Zerouki, M. Ould Ouali & L. Benabou. (2019) Metallurgical Phase Transformation and Behavior of Steels Under Impact Loading. Metallurgical and Materials Transactions A 51:1, pages 252-262.
Crossref
Crossref
O.G. Nimaga, B.B. He, G.J. Cheng, H.W. Yen & M.X. Huang. (2019) Revealing orientation-dependent martensitic transformation in a medium Mn steel by micropillar compression. International Journal of Plasticity 123, pages 165-177.
Crossref
Crossref
Zhongping He, Huachu Liu, Zhenyu Zhu, Weisen Zheng, Yanlin He & Lin Li. (2019) Quantitative Description of External Force Induced Phase Transformation in Silicon–Manganese (Si–Mn) Transformation Induced Plasticity (TRIP) Steels. Materials 12:22, pages 3781.
Crossref
Crossref
Si-lian Chen, Zhao-xi Cao, Chang Wang, Chong-xiang Huang, Dirk Ponge & Wen-quan Cao. (2019) Effect of volume fraction and mechanical stability of austenite on ductility of medium Mn steel. Journal of Iron and Steel Research International 26:11, pages 1209-1218.
Crossref
Crossref
B. B. He, M. Wang & M. X. Huang. (2019) Improving Tensile Properties of Room-Temperature Quenching and Partitioning Steel by Dislocation Engineering. Metallurgical and Materials Transactions A 50:9, pages 4021-4026.
Crossref
Crossref
M. H. Razmpoosh, E. Biro, F. Goodwin & Y. Zhou. (2019) Dynamic Tensile Behavior of Fiber Laser Welds of Medium Manganese Transformation-Induced Plasticity Steel. Metallurgical and Materials Transactions A 50:8, pages 3578-3588.
Crossref
Crossref
A Lavakumar, M H Park, S Gao, A Shibata, Y Okitsu, W Gong, S Harjo & N Tsuji. (2019) In-situ neutron diffraction study on the deformation of a TRIP-assisted multi-phase steel composed of ferrite, austenite and martensite. IOP Conference Series: Materials Science and Engineering 580:1, pages 012036.
Crossref
Crossref
Z.J. Xie, G. Han, Y.S. Yu, C.J. Shang & R.D.K. Misra. (2019) The determining role of intercritical annealing condition on retained austenite and mechanical properties of a low carbon steel: Experimental and theoretical analysis. Materials Characterization 153, pages 208-214.
Crossref
Crossref
Lin Xie, Chunpeng Wang, Yuhui Wang, Guilin Wu & Xiaoxu Huang. (2019) Grain Size Effect on the Mechanical Behavior of Metastable Fe-23Cr-8.5Ni Alloy. Metals 9:7, pages 734.
Crossref
Crossref
B. B. He, M. Wang & M. X. Huang. (2019) Resetting the Austenite Stability in a Medium Mn Steel via Dislocation Engineering. Metallurgical and Materials Transactions A 50:6, pages 2971-2977.
Crossref
Crossref
Thien Q. Phan, Felix H. Kim & Darren C. Pagan. (2019) Micromechanical response quantification using high-energy X-rays during phase transformations in additively manufactured 17-4 stainless steel. Materials Science and Engineering: A 759, pages 565-573.
Crossref
Crossref
Hye-Jin Jeong, Ju-won Park, Kyeong Jae Jeong, Nong Moon Hwang, Sung-Tae Hong & Heung Nam Han. (2019) Effect of Pulsed Electric Current on TRIP-Aided Steel. International Journal of Precision Engineering and Manufacturing-Green Technology 6:2, pages 315-327.
Crossref
Crossref
Sohail Ahmad, Li-Feng Lv, Li-Ming Fu, Huan-Rong Wang, Wei Wang & Ai-Dang Shan. (2018) Effect of Annealing on Microstructure and Mechanical Properties of Ultrafine-Grained Low-Carbon Medium-Manganese Steel Produced by Heavy Warm Rolling. Acta Metallurgica Sinica (English Letters) 32:3, pages 361-371.
Crossref
Crossref
Gang Seob Jung & Markus J. Buehler. (2019) Atomic-scale hardening mechanisms apply on larger scales in ‘architected’ materials. Nature 565:7739, pages 303-304.
Crossref
Crossref
Lianbo Luo, Wei Li, Shilong Liu, Li Wang & Xuejun Jin. (2019) Effect of intermediate temperature annealing on the stability of retained austenite and mechanical properties of medium Mn-TRIP steel. Materials Science and Engineering: A 742, pages 69-77.
Crossref
Crossref
Y. Ru, K.Y. Yu, F. Guo, Y. Ren & L. Cui. (2018) Temperature-dependent plastic deformation mechanisms of a Cu/steel transforming nanolamellar composite. Materials Science and Engineering: A 734, pages 77-84.
Crossref
Crossref
Manjunath Dakshinamurthy & Anxin Ma. (2018) Crack propagation in TRIP assisted steels modeled by crystal plasticity and cohesive zone method. Theoretical and Applied Fracture Mechanics 96, pages 545-555.
Crossref
Crossref
B. B. He, L. Liu & M. X. Huang. (2018) Room-Temperature Quenching and Partitioning Steel. Metallurgical and Materials Transactions A 49:8, pages 3167-3172.
Crossref
Crossref
S. Celotto, H. Ghadbeigi, C. Pinna, B. A. Shollock & P. Efthymiadis. (2018) Deformation-Induced Microstructural Banding in TRIP Steels. Metallurgical and Materials Transactions A 49:7, pages 2893-2906.
Crossref
Crossref
Li Liu, Binbin He & Mingxin Huang. (2018) The Role of Transformation‐Induced Plasticity in the Development of Advanced High Strength Steels. Advanced Engineering Materials 20:6.
Crossref
Crossref
Chenghao Song, Hao Yu, Jun Lu, Tao Zhou & Shufeng Yang. (2018) Stress partitioning among ferrite, martensite and retained austenite of a TRIP-assisted multiphase steel: An in-situ high-energy X-ray diffraction study. Materials Science and Engineering: A 726, pages 1-9.
Crossref
Crossref
B.B. He, B.M. Huang, S.H. He, Y. Qi, H.W. Yen & M.X. Huang. (2018) Increasing yield strength of medium Mn steel by engineering multiple strengthening defects. Materials Science and Engineering: A 724, pages 11-16.
Crossref
Crossref
Zhen‐Lei Li, Dong Chen, Jian Kang, Guo Yuan & Guo‐Dong Wang. (2018) The Effect of Heat Treatment and Precipitation on Grain Growth of TRIP Steel. steel research international 89:5.
Crossref
Crossref
Binhan Sun, Fateh Fazeli, Colin Scott, Nicolas Brodusch, Raynald Gauvin & Stephen Yue. (2018) The influence of silicon additions on the deformation behavior of austenite-ferrite duplex medium manganese steels. Acta Materialia 148, pages 249-262.
Crossref
Crossref
Wen Cui, Marius Gintalas & Pedro E.J. Rivera-Diaz-del-Castillo. (2018) Stability of retained austenite in martensitic high carbon steels. Part II: Mechanical stability. Materials Science and Engineering: A 711, pages 696-703.
Crossref
Crossref
W. Q. Mao, S. Gao, W. Gong, M. H. Park, Y. Bai, A. Shibata & N. Tsuji. 2018. Proceedings of the International Conference on Martensitic Transformations: Chicago. Proceedings of the International Conference on Martensitic Transformations: Chicago
95
98
.
Yu Li, Wei Li, Na Min, Wenqing Liu & Xuejun Jin. (2017) Effects of hot/cold deformation on the microstructures and mechanical properties of ultra-low carbon medium manganese quenching-partitioning-tempering steels. Acta Materialia 139, pages 96-108.
Crossref
Crossref
Mohamed Soliman & Heinz Palkowski. 2017. Rolling of Advanced High Strength Steels. Rolling of Advanced High Strength Steels
323
356
.
Meng Wang & Zhenyu Liu. (2017) Effects of Ultra-Fast Cooling After Hot Rolling and Intercritical Treatment on Microstructure and Cryogenic Toughness of 3.5%Ni Steel. Journal of Materials Engineering and Performance 26:7, pages 3016-3024.
Crossref
Crossref
Rumana Hossain, Farshid Pahlevani & Veena Sahajwalla. (2017) Effect of small addition of Cr on stability of retained austenite in high carbon steel. Materials Characterization 125, pages 114-122.
Crossref
Crossref
P. Honarmandi & R. Arroyave. (2017) Using Bayesian framework to calibrate a physically based model describing strain-stress behavior of TRIP steels. Computational Materials Science 129, pages 66-81.
Crossref
Crossref
B.L. Ennis, E. Jimenez-Melero, E.H. Atzema, M. Krugla, M.A. Azeem, D. Rowley, D. Daisenberger, D.N. Hanlon & P.D. Lee. (2017) Metastable austenite driven work-hardening behaviour in a TRIP-assisted dual phase steel. International Journal of Plasticity 88, pages 126-139.
Crossref
Crossref
Yu Li, Wei Li, Jin Cheng Hu, Hong Mei Song & Xue Jun Jin. (2017) Compatible strain evolution in two phases due to epsilon martensite transformation in duplex TRIP-assisted stainless steels with high hydrogen embrittlement resistance. International Journal of Plasticity 88, pages 53-69.
Crossref
Crossref
Harshad Bhadeshia & Robert Honeycombe. 2017. Steels: Microstructure and Properties. Steels: Microstructure and Properties
271
301
.
Lucia Morales-Rivas, Carlos Garcia-Mateo, Thomas Sourmail, Matthias Kuntz, Rosalia Rementeria & Francisca Caballero. (2016) Ductility of Nanostructured Bainite. Metals 6:12, pages 302.
Crossref
Crossref
Xu Zhu, Wei Li, Hongshan Zhao, Qihang Han, Li Wang, Huisheng Jiao & Xuejun Jin. (2016) Unveiling the Origin of Work Hardening Behavior in an Ultrafine-Grained Manganese Transformation-Induced Plasticity Steel by Hydrogen Investigation. Metallurgical and Materials Transactions A 47:9, pages 4362-4367.
Crossref
Crossref
B. B. He & M. X. Huang. (2016) On the Mechanical Stability of Austenite Matrix After Martensite Formation in a Medium Mn Steel. Metallurgical and Materials Transactions A 47:7, pages 3346-3353.
Crossref
Crossref
Kun Yan, Klaus-Dieter Liss, Ilana B. Timokhina & Elena V. Pereloma. (2016) In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel. Materials Science and Engineering: A 662, pages 185-197.
Crossref
Crossref
B.B. He, H.W. Luo & M.X. Huang. (2016) Experimental investigation on a novel medium Mn steel combining transformation-induced plasticity and twinning-induced plasticity effects. International Journal of Plasticity 78, pages 173-186.
Crossref
Crossref
Seyed Mohammad Kazem Hosseini, Abbass Zarei-Hanzaki & Steve Yue. (2016) Microstructure Development and Mechanical Properties of Low-Silicon-Content TRIP-Assisted Steels after Coiling Process. steel research international 87:2, pages 146-156.
Crossref
Crossref
Caner Şimşir & C. Hakan Gür. 2016. Encyclopedia of Iron, Steel, and Their Alloys. Encyclopedia of Iron, Steel, and Their Alloys
2892
2939
.
H.S. Zhao, W. Li, X. Zhu, X.H. Lu, L. Wang, S. Zhou & X.J. Jin. (2016) Analysis of the relationship between retained austenite locations and the deformation behavior of quenching and partitioning treated steels. Materials Science and Engineering: A 649, pages 18-26.
Crossref
Crossref
Hao Lyu, Annie Ruimi & Hussein M. Zbib. (2015) A dislocation-based model for deformation and size effect in multi-phase steels. International Journal of Plasticity 72, pages 44-59.
Crossref
Crossref
Sourena Yadegari, Sergio Turteltaub & Akke S. J. Suiker. (2015) Generalized grain cluster method for multiscale response of multiphase materials. Computational Mechanics 56:2, pages 193-219.
Crossref
Crossref
Zhikai Guo, Longfei Li, Wangyue Yang & Zuqing Sun. (2015) Microstructures and Mechanical Properties of High-Mn TRIP Steel Based on Warm Deformation of Martensite. Metallurgical and Materials Transactions A 46:4, pages 1704-1714.
Crossref
Crossref
Z.H. Cai, H. Ding, R.D.K. Misra & Z.Y. Ying. (2015) Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content. Acta Materialia 84, pages 229-236.
Crossref
Crossref
A. Varshney, D. Verma, S. Sangal & K. Mondal. (2014) High Strength High Carbon Low Alloy Pearlite-Ferrite-Tempered Martensite Steels. Transactions of the Indian Institute of Metals 68:1, pages 117-128.
Crossref
Crossref
Robin Woracek, Dayakar Penumadu, Nikolay Kardjilov, Andre Hilger, Mirko Boin, John Banhart & Ingo Manke. (2015) Neutron Bragg Edge Tomography for Phase Mapping. Physics Procedia 69, pages 227-236.
Crossref
Crossref
Xianming Zhao, Yongfeng Shen, Lina Qiu, Yandong Liu, Xin Sun & Liang Zuo. (2014) Effects of Intercritical Annealing Temperature on Mechanical Properties of Fe-7.9Mn-0.14Si-0.05Al-0.07C Steel. Materials 7:12, pages 7891-7906.
Crossref
Crossref
Yang Li, Gui-yong Xiao, Lu-bin Chen & Yu-peng Lu. (2014) Acoustic emission study of the plastic deformation of quenched and partitioned 35CrMnSiA steel. International Journal of Minerals, Metallurgy, and Materials 21:12, pages 1196-1204.
Crossref
Crossref
W.H. Zhou, H. Guo, Z.J. Xie, C.J. Shang & R.D.K. Misra. (2014) Copper precipitation and its impact on mechanical properties in a low carbon microalloyed steel processed by a three-step heat treatment. Materials & Design 63, pages 42-49.
Crossref
Crossref
A. Mertens, E.M. Bellhouse & J.R. McDermid. (2014) Microstructure and mechanical properties of a mixed Si–Al TRIP-assisted steel subjected to continuous galvanizing heat treatments. Materials Science and Engineering: A 608, pages 249-257.
Crossref
Crossref
A.-P. Pierman, O. Bouaziz, T. Pardoen, P.J. Jacques & L. Brassart. (2014) The influence of microstructure and composition on the plastic behaviour of dual-phase steels. Acta Materialia 73, pages 298-311.
Crossref
Crossref
Jie Shi, Jun Hu, Chang Wang, Cun-yu Wang, Han Dong & Wen-quan Cao. (2014) Ultrafine Grained Duplex Structure Developed by ART-annealing in Cold Rolled Medium-Mn Steels. Journal of Iron and Steel Research International 21:2, pages 208-214.
Crossref
Crossref
Ercan Cakmak, Sven C. Vogel & Hahn Choo. (2014) Effect of martensitic phase transformation on the hardening behavior and texture evolution in a 304L stainless steel under compression at liquid nitrogen temperature. Materials Science and Engineering: A 589, pages 235-241.
Crossref
Crossref
Stefan BrauserArne KrommEitan DabahThomas KannengiesserMichael Rethmeier. (2013) Thermal Stability of Retained Austenite in Low Alloyed TRIP-Steel Determined by High Energy Synchrotron Radiation. Materials Science Forum 772, pages 129-133.
Crossref
Crossref
Xun Liu, Shuhuai Lan & Jun Ni. (2013) Experimental study of Electro-Plastic Effect on Advanced High Strength Steels. Materials Science and Engineering: A 582, pages 211-218.
Crossref
Crossref
Han DongWen Quan CaoJie Shi. (2013) Formation of an Ultrafine-Grained Austenite-Containing Microstructure from a Cold-Rolled Medium-Manganese Steel Processed Using Intercritical Annealing. Materials Science Forum 762, pages 31-37.
Crossref
Crossref
R. Zhu, S. Li, M. Song, I. Karaman & R. Arroyave. (2013) Phase constitution effect on the ductility of low alloy multiphase transformation induced plasticity steels. Materials Science and Engineering: A 569, pages 137-143.
Crossref
Crossref
Yong-tao Fu, Jing Liu, Jie Shi, Wen-quan Cao & Han Dong. (2013) Effects of Cold Rolling Reduction on Retained Austenite Fraction and Mechanical Properties of High-Si TRIP Steel. Journal of Iron and Steel Research International 20:5, pages 50-56.
Crossref
Crossref
Tanmay Bhattacharyya, Shiv Brat Singh, Swati Sikdar (Dey)Sandip Bhattacharyya, Wolfgang Bleck & Debashish Bhattacharjee. (2013) Microstructural prediction through artificial neural network (ANN) for development of transformation induced plasticity (TRIP) aided steel. Materials Science and Engineering: A 565, pages 148-157.
Crossref
Crossref
Chang Wang, Wenquan Cao, Jie Shi, Chongxiang Huang & Han Dong. (2013) Deformation microstructures and strengthening mechanisms of an ultrafine grained duplex medium-Mn steel. Materials Science and Engineering: A 562, pages 89-95.
Crossref
Crossref
Wael Dabboussi & James Alan Nemes. (2013) Systematic Characterization of the Crashworthiness Properties of Low Alloys Silicon Bearing TRIP Steels. ISIJ International 53:8, pages 1462-1470.
Crossref
Crossref
O. Bouaziz. (2013) Geometrically induced strain hardening. Scripta Materialia 68:1, pages 28-30.
Crossref
Crossref
Shanqiang Ying & Han Dong. 2013. Proceedings of the FISITA 2012 World Automotive Congress. Proceedings of the FISITA 2012 World Automotive Congress
933
947
.
Swarup Kumar Ghosh & Partha Protim Chattopadhyay. (2012) Phase Evolution and Mechanical Behavior of 0.36 wt% C High Strength TRIP‐Assisted Steel. steel research international 83:12, pages 1163-1171.
Crossref
Crossref
C. Hakan GürCaner Şimşir. (2012) Simulation of Quenching: A Review. Materials Performance and Characterization 1:1, pages 104479.
Crossref
Crossref
E. M. Bellhouse & J. R. McDermid. (2012) Selective Oxidation and Reactive Wetting During Hot-Dip Galvanizing of a 1.0 pct Al-0.5 pct Si TRIP-Assisted Steel. Metallurgical and Materials Transactions A 43:7, pages 2426-2441.
Crossref
Crossref
Han Dong. (2012) High performance steels: Initiative and practice. Science China Technological Sciences 55:7, pages 1774-1790.
Crossref
Crossref
WenQuan Cao, Chang Wang, CunYu Wang, Jie Shi, MaoQiu Wang, Han Dong & YuQing Weng. (2012) Microstructures and mechanical properties of the third generation automobile steels fabricated by ART-annealing. Science China Technological Sciences 55:7, pages 1814-1822.
Crossref
Crossref
Wurong Wang, Bimeng Guo, Yurong Ji, Changwei He & Xicheng Wei. (2012) The study on the threshold strain of microvoid formation in TRIP steels during tensile deformation. Materials Science and Engineering: A 546, pages 272-278.
Crossref
Crossref
F. Dahmene, A. Laksimi, S. Hariri, C. Hervé, L. Jaubert, M. Cherfaoui & A. Mouftiez. (2012) Acoustic wave propagation in austenitic stainless steel AISI 304L: Application examples. International Journal of Pressure Vessels and Piping 92, pages 77-83.
Crossref
Crossref
Rongmin Sun, Wenhuan Xu, Cunyu Wang, Jie Shi, Han Dong & Wenquan Cao. (2012) Work Hardening Behavior of Ultrafine Grained Duplex Medium‐Mn Steels Processed by ART‐Annealing. steel research international 83:4, pages 316-321.
Crossref
Crossref
P.J. Jacques. 2012. Phase Transformations in Steels. Phase Transformations in Steels
213
246
.
J. R. McDermid, H. S. Zurob & Y. Bian. (2011) Stability of Retained Austenite in High-Al, Low-Si TRIP-Assisted Steels Processed via Continuous Galvanizing Heat Treatments. Metallurgical and Materials Transactions A 42:12, pages 3627-3637.
Crossref
Crossref
E. M. Bellhouse & J. R. McDermid. (2011) Selective Oxidation and Reactive Wetting during Galvanizing of a CMnAl TRIP-Assisted Steel. Metallurgical and Materials Transactions A 42:9, pages 2753-2768.
Crossref
Crossref
R. Mahnken, A. Schneidt, S. Tschumak & H.J. Maier. (2011) On the simulation of austenite to bainite phase transformation. Computational Materials Science 50:6, pages 1823-1829.
Crossref
Crossref
Tanmay Bhattacharyya, Shiv Brat Singh, Sourav Das, Arunansu Haldar & Debashish Bhattacharjee. (2011) Development and characterisation of C–Mn–Al–Si–Nb TRIP aided steel. Materials Science and Engineering: A 528:6, pages 2394-2400.
Crossref
Crossref
C.M. Fang, M.A. van Huis & H.W. Zandbergen. (2011) Stability and structures of the ε-phases of iron nitrides and iron carbides from first principles. Scripta Materialia 64:3, pages 296-299.
Crossref
Crossref
D.D. Tjahjanto, A.S.J. Suiker, S. Turteltaub & S. van der Zwaag. (2011) Parametric study of multiphase TRIP steels undergoing cyclic loading. Computational Materials Science 50:4, pages 1490-1498.
Crossref
Crossref
Han Dong, Xingjun Sun, Wenquan Cao, Zhengdong Liu, Maoqiu Wang & Yuqing Weng. 2011. Advanced Steels. Advanced Steels
35
57
.
Wenquan Cao, Jie Shi, Chang Wang, Cunyu Wang, Le Xu, Maoqiu Wang, Yuqing Weng & Han Dong. 2011. Advanced Steels. Advanced Steels
209
227
.
Jie Shi, Xinjun Sun, Maoqiu Wang, Weijun Hui, Han Dong & Wenquan Cao. (2010) Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite. Scripta Materialia 63:8, pages 815-818.
Crossref
Crossref
Caner Simsir & C Gur. 2010. Quenching Theory and Technology, Second Edition. Quenching Theory and Technology, Second Edition.
E.M. Bellhouse & J.R. McDermid. (2010) Selective Oxidation and Reactive Wetting of 1.0 Pct Si-0.5 Pct Al and 1.5 Pct Si TRIP-Assisted Steels. Metallurgical and Materials Transactions A 41:6, pages 1539-1553.
Crossref
Crossref
E.M. Bellhouse & J.R. McDermid. (2010) Effect of Continuous Galvanizing Heat Treatments on the Microstructure and Mechanical Properties of High Al-Low Si Transformation Induced Plasticity Steels. Metallurgical and Materials Transactions A 41:6, pages 1460-1473.
Crossref
Crossref
Rolf Mahnken & Andreas Schneidt. (2009) A thermodynamics framework and numerical aspects for transformation-induced plasticity at large strains. Archive of Applied Mechanics 80:3, pages 229-253.
Crossref
Crossref
Hiroshi Matsuda, Hisata Noro, Yasunobu Nagataki & Yoshihiro Hosoya. (2010) Effect of Retained Austenite Stability on Mechanical Properties of 590MPa Grade TRIP Sheet Steels. Materials Science Forum 638-642, pages 3374-3379.
Crossref
Crossref
J.A. Jiménez, M. Carsí, O.A. Ruano & G. Frommeyer. (2009) Effect of testing temperature and strain rate on the transformation behaviour of retained austenite in low-alloyed multiphase steel. Materials Science and Engineering: A 508:1-2, pages 195-199.
Crossref
Crossref
Denny Tjahjanto, Sergio Turteltaub, Akke Suiker & Sybrand van der Zwaag. (2009) A Micromechanical Study of the Deformation Behavior of TRIP‐Assisted Multiphase Steels as a Function of the Microstructural Parameters of the Retained Austenite. Advanced Engineering Materials 11:3, pages 153-157.
Crossref
Crossref
Caner Şimşir & C. Hakan Gür. (2009) A Review on Modeling and Simulation of Quenching. Journal of ASTM International 6:2, pages 1-29.
Crossref
Crossref
Olivier Bouaziz, S. Allain, D. Barcelo & R. Niang. (2011) Strengthening by plastic corrugated reinforcements: an efficient way for strain-hardening improvement by architecture. MRS Proceedings 1188.
Crossref
Crossref
M. Shaira, N. Godin, P. Guy, L. Vanel & J. Courbon. (2008) Evaluation of the strain-induced martensitic transformation by acoustic emission monitoring in 304L austenitic stainless steel: Identification of the AE signature of the martensitic transformation and power-law statistics. Materials Science and Engineering: A 492:1-2, pages 392-399.
Crossref
Crossref
G. Lacroix, T. Pardoen & P.J. Jacques. (2008) The fracture toughness of TRIP-assisted multiphase steels. Acta Materialia 56:15, pages 3900-3913.
Crossref
Crossref
O. Muránsky, P. Šittner, J. Zrník & E.C. Oliver. (2008) In situ neutron diffraction investigation of the collaborative deformation–transformation mechanism in TRIP-assisted steels at room and elevated temperatures. Acta Materialia 56:14, pages 3367-3379.
Crossref
Crossref
E.V. Pereloma, K.F. Russell, M.K. Miller & I.B. Timokhina. (2008) Effect of pre-straining and bake hardening on the microstructure of thermomechanically processed CMnSi TRIP steels with and without Nb and Mo additions. Scripta Materialia 58:12, pages 1078-1081.
Crossref
Crossref
D. D. Tjahjanto, S. Turteltaub & A. S. J. Suiker. (2007) Crystallographically based model for transformation-induced plasticity in multiphase carbon steels. Continuum Mechanics and Thermodynamics 19:7, pages 399-422.
Crossref
Crossref
E. Jimenez-Melero, N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright & S. van der Zwaag. (2007) Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels. Acta Materialia 55:20, pages 6713-6723.
Crossref
Crossref
D.D. Tjahjanto, A.S.J. Suiker, S. Turteltaub, P.E.J. Rivera Diaz del Castillo & S. van der Zwaag. (2007) Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters. Computational Materials Science 41:1, pages 107-116.
Crossref
Crossref
Gyeong Choel Lee, Jae Seong Kim, Bo Young Lee & Sang Yul Lee. (2007) Studies for the Influences of Welding Parameters of GMA Welded 600MPa Grade TRIP Steel. Advanced Materials Research 26-28, pages 503-506.
Crossref
Crossref
Xicheng Wei, Qun Xie, Mei Zhang, Lin Li & Patrick Wollants. (2007) Influence of Strain-Induced Retained Austenite Transformation on the Dynamic Tensile Behaviour of TRIP-aided Steels. steel research international 78:7, pages 554-559.
Crossref
Crossref
P.J. Jacques, Q. Furnémont, F. Lani, T. Pardoen & F. Delannay. (2007) Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing. Acta Materialia 55:11, pages 3681-3693.
Crossref
Crossref
F. Lani, Q. Furnémont, T. Van Rompaey, F. Delannay, P.J. Jacques & T. Pardoen. (2007) Multiscale mechanics of TRIP-assisted multiphase steels: II. Micromechanical modelling. Acta Materialia 55:11, pages 3695-3705.
Crossref
Crossref
Mei Zhang, Lin Li, Yu Su, Renyu Fu, Zi Wan & Bruno C. De Cooman. (2016) Forming Limit Curve (FLC) and Fracture Mechanism of Newly Developed Low‐Carbon Low‐Silicon TRIP Steel. steel research international 78:6, pages 501-505.
Crossref
Crossref
Stéphane GodetC. Georges & Pascal J. Jacques. (2007) On the Phase Transformations in Hot Rolled TRIP-Assisted Multiphase Steels. Materials Science Forum 539-543, pages 4333-4338.
Crossref
Crossref
E. Jimenez-Melero, N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright & S. van der Zwaag. (2007) Martensitic transformation of individual grains in low-alloyed TRIP steels. Scripta Materialia 56:5, pages 421-424.
Crossref
Crossref
Akke S J Suiker & Sergio Turteltaub. (2007) Numerical modelling of transformation-induced damage and plasticity in metals. Modelling and Simulation in Materials Science and Engineering 15:1, pages S147-S166.
Crossref
Crossref
G. Lacroix, Q. Furnemont, P. J. Jacques & T. Pardoen. 2006. Fracture of Nano and Engineering Materials and Structures. Fracture of Nano and Engineering Materials and Structures
819
820
.
V. Andrade-Carozzo & Pascal J. Jacques. (2005) TRIP-Assisted Multiphase Steels with Niobium Additions. Microstructures and Properties. Materials Science Forum 500-501, pages 445-452.
Crossref
Crossref
Akke S. J. Suiker & Sergio Turteltaub. (2005) Computational modelling of plasticity induced by martensitic phase transformations. International Journal for Numerical Methods in Engineering 63:12, pages 1655-1693.
Crossref
Crossref
M. Radu, J. Valy, A.F. Gourgues, F. Le Strat & A. Pineau. (2005) Continuous magnetic method for quantitative monitoring of martensitic transformation in steels containing metastable austenite. Scripta Materialia 52:6, pages 525-530.
Crossref
Crossref
P.J. Jacques. (2004) Transformation-induced plasticity for high strength formable steels. Current Opinion in Solid State and Materials Science 8:3-4, pages 259-265.
Crossref
Crossref
A. Perlade, O. Bouaziz & Q. Furnémont. (2003) A physically based model for TRIP-aided carbon steels behaviour. Materials Science and Engineering: A 356:1-2, pages 145-152.
Crossref
Crossref
. 2003. Thermodynamics, Microstructures and Plasticity. Thermodynamics, Microstructures and Plasticity.
Hiroshi Matsuda, Fusato Kitano, Kohei Hasegawa, Toshiaki Urabe & Yoshihiro Hosoya. (2016) Metallurgy of continuously annealed high strength TRIP steel sheet. Steel Research 73:6-7, pages 211-217.
Crossref
Crossref
Q. Furnémont, M. Kempf, P.J. Jacques, M. Göken & F. Delannay. (2002) On the measurement of the nanohardness of the constitutive phases of TRIP-assisted multiphase steels. Materials Science and Engineering: A 328:1-2, pages 26-32.
Crossref
Crossref
John Mueller, xiao hu, Xiangge Sun, Yan Ren, Jin Kyung Choi, Carol E. Barker, John G. Speer, D. K. Matlock & E. De Moor. (2021) Austenite Formation and Cementite Dissolution During Intercritical Annealing of a Medium-Manganese Steel from a Martensitic Condition. SSRN Electronic Journal.
Crossref
Crossref