Advanced search
Publication Cover
Philosophical Magazine A Volume 52, 1985 - Issue 5
Journal homepage
25
Views
30
CrossRef citations to date
0
Altmetric
Original Articles

Craze plasticity in a series of polystyrene/polybutadiene di-block copolymers with spherical morphology

C. E. Schwier Massachusetts Institute of Technology, Cambridge, Massachusetts, 02139, U.S.A.; Monsanto Polymer Products Co., Springfield, Mass, 01151, U.S.A.
,
A. S. Argon Massachusetts Institute of Technology, Cambridge, Massachusetts, 02139, U.S.A.
&
R. E. Cohen Massachusetts Institute of Technology, Cambridge, Massachusetts, 02139, U.S.A.
Pages 581-603 | Received 04 Dec 1984, Accepted 10 May 1985, Published online: 13 Sep 2006

Citations (30)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (1)

Z. Bartczak. (2002) MECHANISMS OF TOUGHNESS IMPROVEMENT OF SEMI-CRYSTALLINE POLYMERS. Journal of Macromolecular Science, Part B 41:4-6, pages 1205-1229.
Read now

Articles from other publishers (29)

Vincent M. Torres, Erik Furton, Jensen N. Sevening, Elisabeth C. Lloyd, Masafumi Fukuto, Ruipeng Li, Darren C. Pagan, Allison M. Beese, Bryan D. Vogt & Robert J. Hickey. (2023) Revealing Deformation Mechanisms in Polymer-Grafted Thermoplastic Elastomers via In Situ Small-Angle X-ray Scattering . ACS Applied Materials & Interfaces 15:50, pages 57941-57949.
Crossref
Tianren Zhang, Ning Wang & Robert A. Riggleman. (2022) Failure and Mechanical Properties of Glassy Diblock Copolymer Thin Films. Macromolecules 55:24, pages 10880-10890.
Crossref
Ingrid N. Haugan, Bongjoon Lee, Michael J. Maher, Aristotelis Zografos, Haley J. Schibur, Seamus D. Jones, Marc A. Hillmyer & Frank S. Bates. (2019) Physical Aging of Polylactide-Based Graft Block Polymers. Macromolecules 52:22, pages 8878-8894.
Crossref
Bekele Gurmessa & Andrew B. Croll. (2015) Influence of Thin Film Confinement on Surface Plasticity in Polystyrene and Poly(2-vinylpyridine) Homopolymer and Block Copolymer Films. Macromolecules 48:16, pages 5670-5676.
Crossref
Z. Bartczak & A. Galeski. 2014. Polymer Blends Handbook. Polymer Blends Handbook 1203 1297 .
A. S. Argon. 2013. The Physics of Deformation and Fracture of Polymers. The Physics of Deformation and Fracture of Polymers 342 390 .
Goerg H. Michler & Francisco J. Baltá-CallejaGoerg H. Michler & Francisco J. Baltá-Calleja. 2012. Nano- and Micromechanics of Polymers. Nano- and Micromechanics of Polymers 415 500 .
Goerg H. Michler & Francisco J. Baltá-CallejaGoerg H. Michler & Francisco J. Baltá-Calleja. 2012. Nano- and Micromechanics of Polymers. Nano- and Micromechanics of Polymers 415 500 .
Jia (Daniel) Liu, Hung-Jue Sue, Zachary J. Thompson, Frank S. Bates, Marv Dettloff, George Jacob, Nikhil Verghese & Ha Pham. (2008) Nanocavitation in Self-Assembled Amphiphilic Block Copolymer-Modified Epoxy. Macromolecules 41:20, pages 7616-7624.
Crossref
Jong-Young Lee & Alfred J. Crosby. (2005) Crazing in Glassy Block Copolymer Thin Films. Macromolecules 38:23, pages 9711-9717.
Crossref
I. A. Van Casteren, R. A. M. Van Trier, J. G. P. Goossens, H. E. H. Meijer & P. J. Lemstra. (2004) The influence of hydrogen bonding on the preparation and mechanical properties of PS‐diblock copolymer blends. Journal of Polymer Science Part B: Polymer Physics 42:11, pages 2137-2160.
Crossref
A.S. Argon & R.E. Cohen. (2003) Toughenability of polymers. Polymer 44:19, pages 6013-6032.
Crossref
R. Weidisch, M. Ensslen, G. H. Michler & H. Fischer. (1999) Deformation Behavior of Weakly Segregated Block Copolymers. 1. Influence of Morphology of Poly(styrene- b -butyl methacrylate) Diblock Copolymers . Macromolecules 32:16, pages 5375-5382.
Crossref
D. Mathur & E. B. Nauman. (1999) Impact strength of bulk PS/PB blends: Compatibilization and fracture studies. Journal of Applied Polymer Science 72:9, pages 1151-1164.
Crossref
J. Qin, A. S. Argon & R. E. Cohen. (1999) Toughening of glassy polymers by prepackaged deformation-activated diluents. Journal of Applied Polymer Science 71:9, pages 1469-1490.
Crossref
R. Weidisch, M. Stamm, G. H. Michler, H. Fischer & R. Jérôme. (1999) Mechanical Properties of Weakly Segregated Block Copolymers. 3. Influence of Strain Rate and Temperature on Tensile Properties of Poly(styrene- b -butyl methacrylate) Diblock Copolymers with Different Morphologies . Macromolecules 32:3, pages 742-750.
Crossref
Drago Hace, Vera Kovacevic & Davorka Pajc‐Liplin. (2004) Thermally stimulated oxidative degradation of high impact polystyrene with nitric acid. Polymer Engineering & Science 36:8, pages 1140-1151.
Crossref
C. Cheng, A. Hiltner, E. Baer, P. R. Soskey & S. G. Mylonakis. (2003) Deformation of rubber‐toughened polycarbonate: Microscale and nanoscale analysis of the damage zone. Journal of Applied Polymer Science 55:12, pages 1691-1702.
Crossref
N. S. Ramesh, Don H. Rasmussen & Gregory A. Campbell. (2004) The heterogeneous nucleation of microcellular foams assisted by the survival of microvoids in polymers containing low glass transition particles. Part I: Mathematical modeling and numerical simulation. Polymer Engineering & Science 34:22, pages 1685-1697.
Crossref
Stephen H. Spiegelberg, Ali S. Argon & Robert E. Cohen. (2003) Kinetics of crazing in polybutadiene/polystyrene blends. Journal of Applied Polymer Science 53:9, pages 1251-1259.
Crossref
A.S. Argon, R.E. Cohen & T.M. Mower. (1994) Mechanisms of toughening brittle polymers. Materials Science and Engineering: A 176:1-2, pages 79-90.
Crossref
I. Yamaoka & M. Kimura. (1993) Effects of morphology on mechanical properties of a SBS triblock copolymer. Polymer 34:21, pages 4399-4409.
Crossref
Stephen H. Spiegelberg, Ali S. Argon & Robert E. Cohen. (2003) Measurements of craze velocities in polystyrene‐polybutadiene blends. Journal of Applied Polymer Science 48:1, pages 85-97.
Crossref
O.V. Arzhakova, L.M. Yarysheva, S.Yu. Yermusheva, A.L. Volynskii & N.F. Bakeyev. (1991) Aspects of the formation of the porous structure of polymer films based on the two-component system PVC plus rubber modifier on their strain in a liquid adsorption-active medium. Polymer Science U.S.S.R. 33:12, pages 2399-2405.
Crossref
A. S. Argon & R. E. Cohen. 1990. Crazing in Polymers Vol. 2. Crazing in Polymers Vol. 2 301 351 .
F. J. Guild & R. J. Young. (1989) A predictive model for particulate filled composite materials. Journal of Materials Science 24:7, pages 2454-2460.
Crossref
RP Wei & RP GangloffAS Argon. 1989. Fracture Mechanics: Perspectives and Directions (Twentieth Symposium). Fracture Mechanics: Perspectives and Directions (Twentieth Symposium) 127 148 .
J.A. DiCorleto & R.E. Cohen. (1988) Physical ageing and toughness of diblock copolymers. Polymer 29:7, pages 1245-1254.
Crossref
J.A. DiCorleto & R.E. Cohen. (1988) A re-examination of the cavitation model for craze growth in block copolymers with spherical morphology. Polymer 29:7, pages 1240-1244.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.