Advanced search
Publication Cover
Philosophical Magazine A Volume 55, 1987 - Issue 3
Journal homepage
292
Views
209
CrossRef citations to date
0
Altmetric
Original Articles

Plastic deformation of the intermetallic compound Al3Ti

M. Yamaguchi Department of Materials Science and Engineering, Faculty of Engineering, Osaka University, Yamada-oka 2-1, Suita, Osaka, 565, Japan
,
Y. Umakoshi Department of Materials Science and Engineering, Faculty of Engineering, Osaka University, Yamada-oka 2-1, Suita, Osaka, 565, Japan
&
T. Yamane Department of Materials Science and Engineering, Faculty of Engineering, Osaka University, Yamada-oka 2-1, Suita, Osaka, 565, Japan
Pages 301-315 | Received 16 Jun 1986, Accepted 17 Sep 1986, Published online: 20 Aug 2006

Citations (209)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (11)

Joël Douin, Armelle Girard, Muriel Hantcherli & Florence Pettinari-Sturmel. (2013) Weak-beam study of dislocations in D022-Al3Ti deformed at 400°C. Philosophical Magazine 93:1-3, pages 38-49.
Read now
J.B. Singh, M. Sundararaman & P. Mukhopadhyay. (2000) Propagation of stacking faults across domain boundaries in Ni-V and Ni-V-Nb alloys with D022 structure. Philosophical Magazine A 80:9, pages 1983-2010.
Read now
C. Angeles, G. Rosas & R. Perez. (2000) Preparation of Al3Ti and L12 Al3Ti-Base Alloys Microalloyed with Fe by a Melting/Casting Rapid-Solidification Technique. Materials and Manufacturing Processes 15:2, pages 207-219.
Read now
Ying Gao, Jing Zhu & D.E. Mikolla. (1993) Transmission electron microscopy study of the microstructure and dislocation configuration in Al67Co8Ti25 . Philosophical Magazine A 68:3, pages 517-524.
Read now
Armelle François, Gilles Hug & Patrick Veyssière. (1992) The fine structure of dislocations in ni3v. Philosophical Magazine A 66:2, pages 269-288.
Read now
K. S. Kumar & J. D. Whittenberger. (1992) Discontinuously reinforced intermetallic matrix composites via XD synthesis. Materials Science and Technology 8:4, pages 317-330.
Read now
M. Yamaguchi. (1992) High temperature intermetallics – with particular emphasis on TiAl. Materials Science and Technology 8:4, pages 299-307.
Read now
H. Inui, D.E. Luzzi, W.D. Porter, D.P. Pope, V. Vitek & M. Yamaguchi. (1992) Transmission electron microscopy study of dislocation structures in iron-doped al3ti with the l12 structure. Philosophical Magazine A 65:1, pages 245-259.
Read now
H.R. P. Inoue†M. Kitamura‡C.M. Wayman and & Haydn Chen. (1991) Phase stability of Al3Nb as a function of nickel additions. Philosophical Magazine Letters 63:6, pages 345-353.
Read now
D.G. Morris & R. Lerf. (1991) Plastic deformation of the intermetallic Al3Ti. Philosophical Magazine A 63:6, pages 1195-1206.
Read now
Robert Wheeler, VijayK. Vasudevan & HamishL. Fraser. (1990) Factors influencing the deformation mechanisms in the intermetallic compounds Al3Ti and Al3V. Philosophical Magazine Letters 62:3, pages 143-151.
Read now

Articles from other publishers (198)

Asuka Suzuki, Terumasa Fujishiro, Naoki Takata & Makoto Kobashi. (2024) Combustion Foaming of Porous (Al, Fe)<sub>3</sub>Ti with L1<sub>2</sub> Ordered Structure. MATERIALS TRANSACTIONS 65:4, pages 414-421.
Crossref
Li'na Gao, Shufeng Li, Lei Liu, Xinghua Ji, Xin Zhang, Bo Li, Shaolong Li, Xin Li, Wenge Chen & Deng Pan. (2023) Preparation and toughness mechanism of in-situ Ti3AlC2 enhanced and toughened TiAl3 matrix composites. Intermetallics 161, pages 107963.
Crossref
Yoshimi Watanabe, Mami Mihara-Narita & Hisashi Sato. (2023) Grain Refinement of Cast Aluminum by Heterogeneous Nucleation Site Particles with High Lattice Matching. MATERIALS TRANSACTIONS 64:6, pages 1083-1097.
Crossref
Sepehr Nafissi, Nasim Hassani & Afshan Mohajeri. (2022) Hydrogen Adsorption on Ti–V Binary and Ti–V–Al Ternary Alloys of Ti11 Cluster. Journal of Cluster Science 34:3, pages 1337-1346.
Crossref
Satyajeet Kumar, Shailesh Mani Pandey & Jay Shankar Kumar. 2023. Recent Trends in Mechanical Engineering. Recent Trends in Mechanical Engineering 211 219 .
S. Vorotilo, A.A. Nepapushev, D.O. Moskovskikh, V.S. Buinevich, G.V. Trusov, D. Yu. Kovalev, A.O. Semenyuk, N.D. Stepanov, K. Vorotilo, A.Y. Nalivaiko & A.A. Gromov. (2022) Engineering of strong and hard in-situ Al-Al3Ti nanocomposite via high-energy ball milling and spark plasma sintering. Journal of Alloys and Compounds 895, pages 162676.
Crossref
Meini YUAN, Zhijun WANG & Fangzhou HAN. (2022) Effects of sintering temperature and time on defect evolution and compression properties of Ti-Al3Ti laminated composites. Chinese Journal of Aeronautics 35:1, pages 137-143.
Crossref
Jung Bahadur SinghJung Bahadur Singh. 2022. Alloy 625. Alloy 625 111 174 .
Sven Müller & Peer Woizeschke. (2021) Feasibility of a laser powder bed fusion process for additive manufacturing of hybrid structures using aluminum-titanium powder-substrate pairings. Additive Manufacturing 48, pages 102377.
Crossref
Takamasa Inukai, Asuka Suzuki, Naoki Takata, Makoto Kobashi, Yuji Okada & Yuichi Furukawa. (2021) In Situ X‐Ray Observations and Microstructural Characterizations for Understanding Combustion Foaming and Reaction Processes to Synthesize Porous Al 3 Ti Composites From Al–Ti–B 4 C Powders . Advanced Engineering Materials 23:5.
Crossref
Y. Ma, Q.S. Mei, C.L. Li, L. Wan, J.Y. Li, F. Chen, X.M. Mei & Z.H. Chen. (2020) Microstructure and mechanical behavior of Al–TiAl3 composites containing high content uniform dispersion of TiAl3 particles. Materials Science and Engineering: A 786, pages 139435.
Crossref
Amlan Kar, Devinder Yadav, Satyam Suwas & Satish V. Kailas. (2020) Role of plastic deformation mechanisms during the microstructural evolution and intermetallics formation in dissimilar friction stir weld. Materials Characterization 164, pages 110371.
Crossref
Yang Cao, Dan-dan Zhang, Jian-xiu Liu, Kun Liu, Jin-guang Du, Wen-bin He & Jun Ma. (2020) The mechanical performance and a rate-dependent constitutive model for Al3Ti compound. Defence Technology 16:3, pages 627-634.
Crossref
Jeong-Han Lee, Hyun-Kuk Park, Ju-Hun Kim, Jun-Ho Jang, Sung-Kil Hong & Ik-Hyun Oh. (2020) Constitutive behavior and microstructural evolution in Ti–Al–Si ternary alloys processed by mechanical milling and spark plasma sintering. Journal of Materials Research and Technology 9:2, pages 2247-2258.
Crossref
Alireza Rezaei & Hamid Reza Madaah Hosseini. (2020) Investigating the effect of heat treatment on the fracture toughness of a hot extruded Al–Ti composite produced by powder metallurgy route. Materials Science and Engineering: A 771, pages 138573.
Crossref
Peer Woizeschke. 2020. Revolutionizing Aircraft Materials and Processes. Revolutionizing Aircraft Materials and Processes 303 335 .
Chenwei Shao, Shuo Zhao, Xuegang Wang, Yankun Zhu, Zhefeng Zhang & Robert O. Ritchie. (2019) Architecture of high-strength aluminum–matrix composites processed by a novel microcasting technique. NPG Asia Materials 11:1.
Crossref
Zuqi Hu, Chezheng Cao, Marta Pozuelo, Maximilian Sokoluk, Jenn-Ming Yang & Xiaochun Li. (2019) Microstructure Formation and Micropillar Compression of Al-TiC Nanocomposite Manufactured by Solidification Nanoprocessing. Metallurgical and Materials Transactions A 50:10, pages 4620-4631.
Crossref
Zuqi Hu, Marta Pozuelo, Maximilian Sokoluk, Suveen Mathaudhu, Christian Roach, Xiaochun Li & Jenn-Ming Yang. (2019) Micro-mechanical properties of homogeneous- and inhomogeneous-structured pillars in Al–TiC nanocomposite: An in-situ study. Materials Science and Engineering: A 762, pages 138084.
Crossref
Sarath Babu Duraisamy, Hisashi Sato, Tadachika Chiba & Yoshimi Watanabe. (2019) Fragmentation process of platelet Al 3 Ti particles in compressed Al-Al 3 Ti alloy observed by serial sectioning and EBSD analysis . Materials Research Express 6:9, pages 096575.
Crossref
Hisashi Sato & Yoshimi Watanabe. (2018) Three-dimensional microstructural analysis of fragmentation behavior of platelet Al3Ti particles in Al-Al3Ti composite deformed by equal-channel angular pressing. Materials Characterization 144, pages 305-315.
Crossref
Ehsan Ghasali, Masoud Alizadeh & Touradj Ebadzadeh. (2017) TiO 2 ceramic particles-reinforced aluminum matrix composite prepared by conventional, microwave, and spark plasma sintering . Journal of Composite Materials 52:19, pages 2609-2619.
Crossref
Zichuan Lu, Fengchun Jiang, Yunpeng Chang, Zhongyi Niu, Zhenqiang Wang & Chunhuan Guo. (2018) Multi-phase intermetallic mixture structure effect on the ductility of Al3Ti alloy. Materials Science and Engineering: A 721, pages 274-285.
Crossref
Feng Wang, Iakovos Tzanakis, Dmitry Eskin, Jiawei Mi & Thomas Connolley. (2017) In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys. Ultrasonics Sonochemistry 39, pages 66-76.
Crossref
Yang Cao, Ningxia Wei, Xiaoxiao Han, Chunhuan Guo, Jinguang Du, Wenbin He, Jun Ma & Fengchun Jiang. (2017) Mechanical response of titanium tri-aluminide intermetallic alloy. Materials Science and Engineering: A 706, pages 242-248.
Crossref
Zichuan Lu, Chunhuan Guo, Peng Li, Zhenqiang Wang, Yunpeng Chang, Guoyi Tang & Fengchun Jiang. (2017) Effect of electropulsing treatment on microstructure and mechanical properties of intermetallic Al3Ti alloy. Journal of Alloys and Compounds 708, pages 834-843.
Crossref
Alireza Rezaei & Hamid Reza Madaah Hosseini. (2017) Evolution of microstructure and mechanical properties of Al-5 wt% Ti composite fabricated by P/M and hot extrusion: Effect of heat treatment. Materials Science and Engineering: A 689, pages 166-175.
Crossref
Qian Li, Zi-Wei Chen, Qun Luo & Bao-Wei Li. (2017) Experimental investigation and thermodynamic calculation of the Al-rich corner in the ternary Al-Ti-V system. Materials & Design 115, pages 339-347.
Crossref
Feng Wang, Iakovos Tzanakis, Dmitry Eskin, Jiawei Mi & Thomas Connolley. 2017. Light Metals 2017. Light Metals 2017 213 219 .
Yong Li, Xiao-Juan Ma, Qi-Jun Liu, Ge-Xing Kong, Hai-Xia Ma, Wen-Peng Wang, Yi-Gao Wang, Zhen Jiao, Fu-Sheng Liu & Zheng-Tang Liu. (2016) Theoretics-directed effect of copper or aluminum content on the ductility characteristics of Al-based (Al 3 Ti, AlTi, AlCu, AlTiCu 2 ) intermetallic compounds . Chinese Physics B 25:11, pages 113101.
Crossref
Zichuan Lu, Ningxia Wei, Peng Li, Chunhuan Guo & Fengchun Jiang. (2016) Microstructure and mechanical properties of intermetallic Al3Ti alloy with residual aluminum. Materials & Design 110, pages 466-474.
Crossref
Ningxia Wei, Xiaoxiao Han, Xueyi Zhang, Yang Cao, Chunhuan Guo, Zichuan Lu & Fengchun Jiang. (2016) Characterization and properties of intermetallic Al 3 Ti alloy synthesized by reactive foil sintering in vacuum . Journal of Materials Research 31:17, pages 2706-2713.
Crossref
R. Boulechfar, H. Meradji, Z. Chouahda, S. Ghemid, S. Drablia & R. Khenata. (2014) FP-LAPW investigation of the structural, electronic and thermodynamic properties of Al 3 Ta compound . International Journal of Modern Physics B 29:02, pages 1450244.
Crossref
Lei Li, Qingfeng Zhu, Hui Zhang, Yubo Zuo, Chunyan Ban, Lizi He, Haitao Liu & Jianzhong Cui. (2014) Morphological and crystallographic characterization of solidified Al–3Ti–1B master alloy under a high magnetic field. Materials Characterization 95, pages 1-11.
Crossref
Jian Li, Ming Zhang & Xian Luo. (2013) Theoretical investigations on phase stability, elastic constants and electronic structures of D022- and L12-Al3Ti under high pressure. Journal of Alloys and Compounds 556, pages 214-220.
Crossref
M. P. Brady, B. A. Pint, P. F. Tortorelli, I. G. Wright & R. J. HanrahanJr.Jr.. 2006. Materials Science and Technology. Materials Science and Technology.
Wang Hai-Yan, Li Chang-Yun, Gao Jie, Hu Qian-Ku & Mi Guo-Fa. (2013) First-principles studies of the structural and thermodynamic properties of TiAl3 under high pressure. Acta Physica Sinica 62:6, pages 068105.
Crossref
Hisashi Sato, Yusuke Noda & Yoshimi Watanabe. (2013) 3-Dimensional Microstructural Evaluation of Wear-Induced Layer in Al&ndash;Al<sub>3</sub>Ti Functionally Graded Materials by Serial Sectioning. MATERIALS TRANSACTIONS 54:8, pages 1274-1280.
Crossref
J. Li, Y.Q. Yang & X. Luo. (2012) First-principles study of the Al(001)/Al3Ti(001) interfacial properties. Computational Materials Science 62, pages 136-141.
Crossref
Masashi Yoshida & Takafumi Yumitate. (2012) Mechanical Properties of TiB<sub>2</sub>&ndash;Al<sub>3</sub>Ti and TiB<sub>2</sub>&ndash;(Al,Ni)<sub>3</sub>Ti Composites. MATERIALS TRANSACTIONS 53:11, pages 1933-1937.
Crossref
Masashi Yoshida. (2012) Effects of Al 3 Ti and (Al,Ni) 3 Ti Addition on the Sintering of TiB 2 . MRS Proceedings 1373.
Crossref
Masashi Yoshida. (2011) Effects of Al 3 Ti Addition on the Sintering of TiB 2 . MRS Proceedings 1307.
Crossref
R. Mitra, N. Eswara Prasad & Y. R. Mahajan. (2012) Mechanical behaviour of Ti5Si3 based alloys and composites. Transactions of the Indian Institute of Metals 61:5, pages 427-433.
Crossref
Xiaoma Tao, Yifang Ouyang, Huashan Liu, Yuanping Feng, Yong Du & Zhanpeng Jin. (2008) First-principles calculations of the thermodynamic and elastic properties of the L1 2 -based Al 3 RE (RE = Sc, Y, La–Lu) . International Journal of Materials Research 99:6, pages 582-588.
Crossref
Naoki Mizuta, Kiyotaka Matsuura, Munekazu Ohno, Yoshinari Miyamoto & Soshu Kirihara. (2008) Titanium aluminide coating on titanium surface using aluminum plating and surface melting. Journal of Japan Institute of Light Metals 58:12, pages 656-661.
Crossref
V. Vitek & V. Paidar. 2008. A Tribute to F.R.N. Nabarro. A Tribute to F.R.N. Nabarro 439 514 .
D. Roy, S. Kumari, R. Mitra & I. Manna. (2007) Microstructure and mechanical properties of mechanically alloyed and spark plasma sintered amorphous–nanocrystalline Al65Cu20Ti15 intermetallic matrix composite reinforced with TiO2 nanoparticles. Intermetallics 15:12, pages 1595-1605.
Crossref
Toshitada Shimozaki, Kenichi Takasaki, Takahisa Okino & C.G. Lee. (2006) Oxidation Behavior of TiAl<sub>3</sub> Formed in Ti/Al Diffusion Couple and Reaction Diffusion in Ti/TiAl<sub>3</sub> Multi-Phase Diffusion Couple. Defect and Diffusion Forum 258-260, pages 340-345.
Crossref
Gerhard Sauthoff. 2006. Materials Science and Technology. Materials Science and Technology.
Ming Xu, Youming Liu, Liuhe Li, Xun Cai, Qiulong Chen & Paul K. Chu. (2006) Experimental and numerical evaluations of adhesion strength and stress in TiN films deposited on ti-implanted aluminum. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 24:2, pages 212-217.
Crossref
JIANG XU, YIDE KAN & WENJIN LIU. (2012) IN-SITU SYNTHETIC TiB 2 PARTICULATE REINFORCED METAL MATRIX COMPOSITE COATING ON AA2024 ALUMINUM ALLOY BY LASER CLADDING TECHNOLOGY . Surface Review and Letters 12:04, pages 561-567.
Crossref
Y.Q. Xie, H.J. Peng, X.B. Liu & K. Peng. (2005) Atomic states, potential energies, volumes, stability and brittleness of ordered FCC Ti3Al-type alloys. Physica B: Condensed Matter 362:1-4, pages 1-17.
Crossref
R. W. Hayes, P. B. Berbon & R. S. Mishra. (2004) Microstructure characterization and creep deformation of an Al-10 Wt Pct Ti-2 Wt Pct Cu nanocomposite. Metallurgical and Materials Transactions A 35:12, pages 3855-3861.
Crossref
Y.Q. Xie, X.B. Liu, K. Peng & H.J. Peng. (2004) Atomic states, potential energies, volumes, stability, and brittleness of ordered FCC TiAl3-type alloys. Physica B: Condensed Matter 353:1-2, pages 15-33.
Crossref
Hee Sup Jang, Chang Won Kang, Yangdo Kim, Kyung Tae Hong & Seon-Jin Kim. (2004) Effects of Mn addition on microstructure and mechanical properties of (Al+x at.%Mn)3Ti intermetallic compounds prepared by mechanical alloying and spark plasma sintering. Intermetallics 12:5, pages 477-485.
Crossref
Chang Won Kang, Hee Sup Jang & Seon Jin Kim. (2004) Thermal Stability and Mechanical Properties of Nanocrystalline L1<sub>2</sub> Al<sub>3</sub>Hf and (Al+12.5 at.%Zn)<sub>3</sub>Hf Prepared by MA and SPS. Materials Science Forum 449-452, pages 809-812.
Crossref
S.S. Nayak & B.S. Murty. (2004) Synthesis and stability of L12–Al3Ti by mechanical alloying. Materials Science and Engineering: A 367:1-2, pages 218-224.
Crossref
M.S. Chu & S.K. Wu. (2004) Improvement in the oxidation resistance of α2-Ti3Al by sputtering Al film and subsequent interdiffusion treatment. Surface and Coatings Technology 179:2-3, pages 257-264.
Crossref
B. Bhattacharya & R. K. Ray. (2004) Recrystallization behavior of a heavily cold-rolled Ni3Al(B,Zr) alloy. Metallurgical and Materials Transactions A 35:1, pages 71-81.
Crossref
Georg Frommeyer & Sven Knippscheer. 2003. Handbook of Aluminum. Handbook of Aluminum.
J.S. Marte, S.L. Kampe & A.A. Wereszczak. (2003) Elevated temperature deformation behavior of discontinuous-reinforced titanium aluminide matrix composites. Materials Science and Engineering: A 346:1-2, pages 292-301.
Crossref
Woong-Seong Chang & B. C. Muddle. (2003) Structure and stability of a new ternary hexagonal phase in Al3 Ti-based Al-Ti-V alloys. Metallurgical and Materials Transactions A 34:3, pages 491-501.
Crossref
Hee Sup Jang, Chang Won Kang, Young-Seok Kim & Seon-Jin Kim. (2011) Fracture Toughness of Nanocrystalline L1 2 (Al+X at.%Mn) 3 Ti Prepared by Mechanical Alloying and Consolidated by SPS . MRS Proceedings 778.
Crossref
Toshio Matsubara, Tomohide Shibutani, Keisuke Uenishi & Kojiro F Kobayashi. (2002) Fabrication of TiB2 reinforced Al3Ti composite layer on Ti substrate by reactive-pulsed electric current sintering. Materials Science and Engineering: A 329-331, pages 84-91.
Crossref
J.W. CHRISTIAN. 2002. The Theory of Transformations in Metals and Alloys. The Theory of Transformations in Metals and Alloys 859 960 .
Fu-Sheng Sun, Chun-Xiao Cao, Seung-Eon Kim, Yong-Tai Lee & Ming-Gao Yan. (2001) Effect of Nd on the microstructure and properties of a TiAl alloy. Scripta Materialia 44:12, pages 2775-2780.
Crossref
Yoshimi Watanabe, Hiroyuki Eryu & Kiyotaka Matsuura. (2001) Evaluation of three-dimensional orientation of Al3Ti platelet in Al-based functionally graded materials fabricated by a centrifugal casting technique. Acta Materialia 49:5, pages 775-783.
Crossref
B. Bhattacharya & R. K. Ray. (2000) Deformation behavior of a Ni3Al(B,Zr) alloy during cold rolling: Part I. changes in order and structure. Metallurgical and Materials Transactions A 31:12, pages 3001-3010.
Crossref
D.B. Lee, S.H. Kim, K. Niinobe, C.W. Yang & M. Nakamura. (2000) Effect of Cr on the high temperature oxidation of L12-type Al3Ti intermetallics. Materials Science and Engineering: A 290:1-2, pages 1-5.
Crossref
H. X. Peng, Z. Fan & D. Z. Wang. (2011) In situ Al 3 Ti–Al 2 O 3 intermetallic matrix composite: Synthesis, microstructure, and compressive behavior . Journal of Materials Research 15:9, pages 1943-1949.
Crossref
Jung-Gu Kim, Yun-Je Choi, Dong-Bok Lee & M Nakamura. (2000) Effect of chromium on the corrosion behavior of Al3Ti in 3.5% NaCl solution. Scripta Materialia 43:7, pages 579-584.
Crossref
T Matsubara, T Shibutani, K Uenishi & K.F Kobayashi. (2000) Fabrication of a thick surface layer of Al3Ti on Ti substrate by reactive-pulsed electric current sintering. Intermetallics 8:7, pages 815-822.
Crossref
M. P. Brady, B. A. Pint, P. F. Tortorelli, I. G. Wright & R. J. Hanrahan Jr.. 2000. Materials Science and Technology: A Comprehensive Treatment. Materials Science and Technology: A Comprehensive Treatment 229 325 .
Hiroshi Mabuchi, Hitoshi Nagayama, Hiroshi Tsuda, Toshiyuki Matsui & Kenji Morii. (2000) Formation of Ternary L1<SUB>2</SUB> Intermetallic Compound and Phase Relation in the Al&ndash;Ti&ndash;Fe System. Materials Transactions, JIM 41:6, pages 733-738.
Crossref
Ken Yamashita, Chihiro Watanabe, Shinji Kumai, Masaharu Kato, Akikazu Sato & Yoshimi Watanabe. (2000) Cyclic Deformation and Development of Dislocation Structures in a Centrifugally Cast Al&ndash;Al<SUB>3</SUB>Ti of Functionally Graded Material. Materials Transactions, JIM 41:10, pages 1322-1328.
Crossref
H Mabuchi, H Tsuda, T Kawakami, S Nakamatsu, T Matsui & K Morii. (1999) Oxidation-resistant coating for gamma titanium aluminides by pack cementation. Scripta Materialia 41:5, pages 511-516.
Crossref
I. C. I. Okafor & R. G. Reddy. (1999) The oxidation behavior of high-temperature aluminides. JOM 51:6, pages 35-40.
Crossref
T. Nakano, A. Negishi, K. Hayashi & Y. Umakoshi. (1999) Ordering process of Al5Ti3, h-Al2Ti and r-Al2Ti with f.c.c.-based long-period superstructures in rapidly solidified Al-rich TiAl alloys. Acta Materialia 47:4, pages 1091-1104.
Crossref
Tadashi Kawakami, Hiroshi Mabuchi, Hiroshi Tsuda, Toshiyuki Matsui & Kenji Morii. (1999) Oxidation Resistant Coating of L1<SUB>2</SUB>-(Al, Cr)<SUB>3</SUB>Ti on TiAl Alloys by Pack Cementation. Materials Transactions, JIM 40:5, pages 381-384.
Crossref
C. Angeles, G. Rosas & R. Perez. (1998) Microstructural and chemical characterization of Al3Ti alloy obtained with a rapid solidification technique. Materials Chemistry and Physics 56:3, pages 262-265.
Crossref
Woong-Seong ChangB. C. Muddle. (1998) Microstructural and Crystallographic Characterization of Multiphase Al<SUB>62</SUB>Ti<SUB>10</SUB>V<SUB>28</SUB> Alloy. Materials Transactions, JIM 39:9, pages 975-981.
Crossref
Ken Yamashita, Ichiro Fujimoto, Shinji Kumai & Akikazu Sato. (1998) Plastic Deformation of D0<SUB>22</SUB> Ordered Al<SUB>3</SUB>Ti in a Centrifugally Cast Al&ndash;Al<SUB>3</SUB>Ti Composite. Materials Transactions, JIM 39:8, pages 824-833.
Crossref
V. Vitek. (1998) Atomic structure of dislocations in intermetallics with close packed structures: a comparative study. Intermetallics 6:7-8, pages 579-585.
Crossref
W.H. Tian & M. Nemoto. (1998) Phase decomposition and hardening of Ag-modified L12Al3Ti. Intermetallics 6:3, pages 193-200.
Crossref
T. Klassen, M. Oehring & R. Bormann. (1997) Microscopic mechanisms of metastable phase formation during ball milling of intermetallic TiAl phases. Acta Materialia 45:9, pages 3935-3948.
Crossref
N.Q. Wu, G.-X. Wang, W. Li, J.M. Wu & Z.Z. Li. (1997) Mechanically driven synthesis of nanophase composite powder. Materials Letters 32:4, pages 259-262.
Crossref
Kang-Yull Lee & Jung-Ho Ahn. (1997) Properties of mechanically alloyed Al75-x Ti25Crx. Materials Science and Engineering: A 229:1-2, pages 63-67.
Crossref
Woong-Seong Chang & B. C. Muddle. (1997) Microstructure and properties of duplex δ-Al3(Ti, V)/β-(Ti, V) alloys. Metallurgical and Materials Transactions A 28:4, pages 927-938.
Crossref
Hiroshi Mabuchi, Hiroshi Tsuda, Toshiyuki Matsui & Kenji Morii. (1997) Microstructure and Mechanical Properties of Ternary L1<SUB>2</SUB> Intermetallic Compound in Al&ndash;Ti&ndash;Cr System. Materials Transactions, JIM 38:6, pages 560-565.
Crossref
Woong -Seong Chang & B. C. Muddle. (1997) Trialuminide intermetallic alloys for elevated temperature applications—overview. Metals and Materials 3:1, pages 1-15.
Crossref
T. Yamamoto & J. Mazumder. (1996) Synthesis of nanocrystalline NbAl3 by laser ablation technique. Nanostructured Materials 7:3, pages 305-312.
Crossref
J. C. Ma, M. J. Lukitsch, C. E. Ambrow & J. E. Benci. (2011) Fracture Toughness of Stoichiometric, Non-Stoichiometric and Ternary-Alloyed Al 2 Ti . MRS Proceedings 460.
Crossref
Jinmin Chen, W. E. Frazier & E. V. Barrera. (2011) Microstructure Analysis of Melt-Spun Al 3 Ti Intermetallics by XRD and EXAFS . MRS Proceedings 460.
Crossref
Senying Liu, Rongze Hu & Chongyu Wang. (1996) Electronic and physical properties of Al3V x Ti1− x ( x =1, 0.875, and 0) alloys . Journal of Applied Physics 79:1, pages 214-221.
Crossref
P. HAASEN†. 1996. Physical Metallurgy. Physical Metallurgy 2009 2073 .
P.B. Desch, R.B. Schwarz & P. Nash. (1996) Mechanical alloying to produce L12 phases in the AlZr system. Scripta Materialia 34:1, pages 37-43.
Crossref
T.J. Jewett, B. Ahrens & M. Dahms. (1996) Phase equilibria involving the τ-L12 and TiAl2 phases in the TiAlCr system. Intermetallics 4:7, pages 543-556.
Crossref
C.-P. Reip & G. Sauthoff. (1996) Deformation behaviour of the intermetallic phase Al3Nb with DO22 structure and of the Al3Nb-base alloys. Part II: creep behaviour. Intermetallics 4:5, pages 377-385.
Crossref
Seung Zeon Han, Byung Sup Rho, Hyuck Mo Lee & Si Kyung Choi. (1996) Effect of alloyed Ti:Zr ratio on phase stability of Al66Mn9(Ti, Zr)25 intermetallic compounds. Intermetallics 4:3, pages 245-249.
Crossref
Mohamed Y. Nazmy. 1996. Physical Metallurgy and processing of Intermetallic Compounds. Physical Metallurgy and processing of Intermetallic Compounds 95 125 .
K. S. Kumar. 1996. Physical Metallurgy and processing of Intermetallic Compounds. Physical Metallurgy and processing of Intermetallic Compounds 392 440 .
Kyosuke Kishida, Shigenobu Yokoshima, David R. Johnson, Haruyuki Inui & Masaharu Yamaguchi. 1996. Stability of Materials. Stability of Materials 547 579 .
Bong Goo Kim, Gil Moo Kim & Chong Jip Kim. (1995) Oxidation behavior of TiAl-X (X = Cr, V, Si, Mo or Nb) intermetallics at elevated temperature. Scripta Metallurgica et Materialia 33:7, pages 1117-1125.
Crossref
D.G. Morris, R. Lerf & M. Leboeuf. (1995) The influence of alloying modifications on mechanical properties, phase stability, and fault energies in cubic titanium trialuminide-based alloys. Acta Metallurgica et Materialia 43:7, pages 2825-2836.
Crossref
Gerhard Sauthoff. 1995. Intermetallics. Intermetallics 120 157 .
M. Khantha, D.P. Pope & V. Vitek. (1995) Dislocation generation instability and the brittle-to-ductile transition. Materials Science and Engineering: A 192-193, pages 435-442.
Crossref
Joël Douin, K. Sharvan Kumar & Patrick Veyssière. (1995) Dislocation structure in L12 Mn-stabilized Al3Ti deformed between 77 and 873 K. Materials Science and Engineering: A 192-193, pages 92-96.
Crossref
J.E. Benci, J.C. Ma & T.P. Feist. (1995) Evaluation of the intermetallic compound Al2Ti for elevated-temperature applications. Materials Science and Engineering: A 192-193, pages 38-44.
Crossref
J.W. Christian & S. Mahajan. (1995) Deformation twinning. Progress in Materials Science 39:1-2, pages 1-157.
Crossref
Liu Senying, Hu Rongze & Wang Chongyu. (1994) Electronic and physical properties of the intermetallic compounds Al3Ti+X(X = Mn, Fe, or Cu). Solid State Communications 92:4, pages 303-307.
Crossref
M Khantha, V Vitek & D P Pope. (1994) Atomistic modeling of planar faults, dislocations and twins in a non-cubic intermetallic compound. Modelling and Simulation in Materials Science and Engineering 2:3A, pages 587-596.
Crossref
Z.L. Wu & D.P. Pope. (1994) Ll2 Al3 Ti-based alloys with Al2Ti precipitates—II. Deformation behavior of single crystals. Acta Metallurgica et Materialia 42:2, pages 519-526.
Crossref
John C. Ma, John E. Benci & Thomas P. Feist. (2011) Effects of Processing on the Mechanical Properties and Oxidation behavior of Al 2 Ti . MRS Proceedings 364.
Crossref
David G. Morris, Reto Lerf & Mireille Leboeuf. (2011) Alloying of Cubic Alloys Based on Al 3 Ti: Phase Instabilities and the Control of Fault Energies . MRS Proceedings 364.
Crossref
U. Bohnenkamp, G.A. Wang, T.J. Jewett & M. Dahms. (1994) A quantitative investigation of phase formation during annealing of cold-extruded elemental powder mixtures Ti-48 at. % Al and Ti-48 at. % Al-2 at. % Cr. Intermetallics 2:4, pages 275-283.
Crossref
R. B. Schwarz, P. B. Desch & S. Srinivasan. 1994. Statics and Dynamics of Alloy Phase Transformations. Statics and Dynamics of Alloy Phase Transformations 81 101 .
Senying Liu, Rongze Hu & Chongyu Wang. (1993) Electronic-structure effects on the intermetallic compounds Al3Ti with the addition of the alloying elements Cr or Mn. Journal of Applied Physics 74:5, pages 3204-3210.
Crossref
D.G. Morris, M.A. Morris & M. Leboeuf. (1993) Fracture of a manganese-modified titanium trialuminide alloy. Acta Metallurgica et Materialia 41:7, pages 2077-2090.
Crossref
R.N. Wright, A.E. Erickson, M.H. O'Brien & B.H. Rabin. (1993) Characterization of Al2Ti precipitates in cubic Al64.5Ti27.5Cr8. Scripta Metallurgica et Materialia 28:10, pages 1293-1297.
Crossref
D.G Morris & M Leboeuf. (1993) The preparation and properties of composite materials based on cubic titanium trialuminide. Scripta Metallurgica et Materialia 28:7, pages 827-832.
Crossref
Y. Ma & J. Gj⊘nnes. (2011) TEM study on laser processed intermetallic phases: Al 16 Ti 6 (Fe or Ni) 7 . Journal of Materials Research 8:3, pages 421-429.
Crossref
Y. Nakayama & H. Mabuchi. (1993) Formation of ternary L12 compounds in Al3Ti-base alloys. Intermetallics 1:1, pages 41-48.
Crossref
C.-P. Reip & G. Sauthoff. (1993) Deformation behaviour of the intermetallic phase Al3Nb with DO22 structure and of Al3Nb-base alloys: Part I. Physical properties and short-term behaviour. Intermetallics 1:3, pages 159-169.
Crossref
D.G. Morris, M.A. Morris, S. Günter, M. Leboeuf & G. Hollrigl. (1992) Spray deposition of intermetallics based on Al3Ti and TiAl. Scripta Metallurgica et Materialia 27:11, pages 1645-1650.
Crossref
S. Sircar, K. Chattopadhyay & J. Mazumder. (1992) Nonequilibrium synthesis of NbAl3 and Nb-Al-V Alloys by Laser Cladding: Part I. Microstructure. Metallurgical Transactions A 23:9, pages 2419-2429.
Crossref
Shipu Chen, Wei Zhang, Yuanhu Zhang, Gengxiang Hu, Tiefan Li, Jianian Shen & Longjiang Zhou. (1992) Oxidation behavior of Al3Ti-based L12-type intermetallic alloys. Scripta Metallurgica et Materialia 27:4, pages 455-460.
Crossref
D.G. Morris, M.A. Morris & M. LeBoeuf. (1992) The mechanical behaviour of some titanium trialuminide intermetallics prepared using mechanical milling techniques. Materials Science and Engineering: A 156:1, pages 11-19.
Crossref
Hu Gengxiang, Chen Shipu, Wu Xiaohua & Chen Xiaofu. (2011) Reply to comments of D. H. Zeuch. Journal of Materials Research 7:7, pages 1959-1960.
Crossref
David H. Zeuch. (2011) Comment on “Plastic deformation and fracture behavior of a Fe-modified Al 3 Ti-base L1 2 intermetallic alloy” [J. Mater. Res. 6 , 957 (1991)]: The importance of specimen length-to-width ratios and end constraints in compression testing of brittle and semibrittle materials . Journal of Materials Research 7:7, pages 1956-1959.
Crossref
Y. Ma, T. Arnesen, J. Gj⊘nnes & J. Taft⊘. (2011) Laser processed Al 3 Ti-based intermetallics: Al 5± X Ti 2± Y (Fe, Ni, or Cu) 1±z . Journal of Materials Research 7:7, pages 1722-1734.
Crossref
Mohan G. Hebsur, Ivan E. Locci, S.V. Raj & Michael V. Nathal. (2011) Influence of processing on the microstructure and mechanical properties of a NbAl 3 -base alloy . Journal of Materials Research 7:7, pages 1696-1706.
Crossref
S. Srinivasan, S.R. Chen & R.B. Schwarz. (1992) Synthesis of Al/Al3Ti two-phase alloys by mechanical alloying. Materials Science and Engineering: A 153:1-2, pages 691-695.
Crossref
Xiaofu Chen, Shipu Chen, Xiaohua Wu, Lianhua Fang & Gengxiang Hu. (1992) The role of hot-working on the microstructure and mechanical properties of the L12-type manganese-modified Al3Ti alloy. Materials Science and Engineering: A 153:1-2, pages 370-376.
Crossref
T Kumagai & S Hanada. (1992) Microstructure of Nb2AlNbAl3 eutectic alloys produced by unidirectional solidification. Materials Science and Engineering: A 152:1-2, pages 349-355.
Crossref
M. Khantha, V. Vitek & D.P. Pope. (1992) An atomistic study of dislocations and their mobility in a model DO22 alloy. Materials Science and Engineering: A 152:1-2, pages 89-94.
Crossref
N Durlu & O.T Inal. (1992) Phase relations in TiAl2-based ternary titanium aluminides of iron or nickel. Materials Science and Engineering: A 152:1-2, pages 67-75.
Crossref
Hyuck Mo Lee. (1992) Design of Al3(Ti,V,Zr) systems through phase stability calculations. Materials Science and Engineering: A 152:1-2, pages 26-30.
Crossref
P.A. Earvolino, M.E. Fine, J.R. Weertman & V.R. Parameswaran. (1992) Processing an metal-matrix composite by conventional melting, casting and rolling. Scripta Metallurgica et Materialia 26:6, pages 945-948.
Crossref
D.G. Morris. (2011) Dislocations in plastically deformed L1 2 compounds based on Al 3 Ti . Journal of Materials Research 7:2, pages 303-312.
Crossref
S. Srinivasan, S.R. Chen & R.B. Schwarz. 1992. High Temperature Aluminides and Intermetallics. High Temperature Aluminides and Intermetallics 691 695 .
Xiaofu Chen, Shipu Chen, Xiaohua Wu, Lianhua Fang & Gengxiang Hu. 1992. High Temperature Aluminides and Intermetallics. High Temperature Aluminides and Intermetallics 370 376 .
T. Kumagai & S. Hanada. 1992. High Temperature Aluminides and Intermetallics. High Temperature Aluminides and Intermetallics 349 355 .
M. Khantha, V. Vitek & D.P. Pope. 1992. High Temperature Aluminides and Intermetallics. High Temperature Aluminides and Intermetallics 89 94 .
N. Durlu & O.T. Inal. 1992. High Temperature Aluminides and Intermetallics. High Temperature Aluminides and Intermetallics 67 75 .
Hyuck Mo Lee. 1992. High Temperature Aluminides and Intermetallics. High Temperature Aluminides and Intermetallics 26 30 .
V. Vitek. (1992) Structure of dislocation cores in metallic materials and its impact on their plastic behaviour. Progress in Materials Science 36, pages 1-27.
Crossref
N. Durlu & O. T. Inal. (1992) Study on TiAl2-based ternary (Fe or Ni) titanium aluminides. Journal of Materials Science 27:5, pages 1175-1178.
Crossref
S. Srinivasan, P.B. Desch & R.B. Schwarz. (1991) Metastable phases in the Al3X (X = Ti, Zr, and Hf) intermetallic system. Scripta Metallurgica et Materialia 25:11, pages 2513-2516.
Crossref
Erol S. Metin & Osman T. Inal. (1991) Structural analysis of a TiAl3 + ZrO2 particulate composite. Materials Science and Engineering: A 148:1, pages 115-122.
Crossref
H. Inui, A. Nakamura, M.H. Oh & M. Yamaguchi. (1991) High-resolution electron microscope study of lamellar boundaries in Ti-rich TiAl polysynthetically twinned crystals. Ultramicroscopy 39:1-4, pages 268-278.
Crossref
I. S. Virk & R. A. Varin. (1991) Development of structure and porosity in cast Al5CuZr2 and Al66Mn9Zr25 intermetallic compounds. Metallurgical Transactions A 22:11, pages 2545-2552.
Crossref
R. Lerf & D.G. Morris. (1991) Plastic deformation of an iron-modified titanium trialuminide alloy. Acta Metallurgica et Materialia 39:10, pages 2419-2430.
Crossref
S.R. Nishitani, K. Masaki, Y. Shirai & M. Yamaguchi. (1991) Anomalous temperature dependence of electrical resistivity of Ll2 intermetallic compounds formed by alloying Al3Ti with Mn and Fe. Scripta Metallurgica et Materialia 25:8, pages 1921-1925.
Crossref
P.R. Munroe & I. Baker. (1991) Microstructure of As-Cast Al69Ti23Ni8. Materials Characterization 27:1, pages 45-52.
Crossref
K. Hirukawa, H. Mabuchi & Y. Nakayama. (1991) Oxidation behavior of TiAl3-based alloys with the L12 structure. Scripta Metallurgica et Materialia 25:5, pages 1211-1216.
Crossref
M.S. DiPietro, K.S. Kumar & J.D. Whittenberger. (2011) Compression behavior of TiB 2 -particulate-reinforced composites of Al 22 Fe 3 Ti 8 . Journal of Materials Research 6:3, pages 530-538.
Crossref
L.J. Parfitt, J.L. Smialek, J.P. Nic & D.E. Mikkola. (1991) Oxidation behavior of cubic phases formed by alloying Al3Ti with Cr and Mn. Scripta Metallurgica et Materialia 25:3, pages 727-731.
Crossref
D.G. Morris. (1991) The influence of annealing on dislocations in Al5Ti2Fe. Scripta Metallurgica et Materialia 25:3, pages 713-716.
Crossref
T. Hong & A.J. Freeman. (2011) Effect of ternary additions on the structural stability and electronic structure of intermetallic compounds: Al 3 Ti + Cu . Journal of Materials Research 6:2, pages 330-338.
Crossref
Gerhard SAUTHOFF. 1991. Frontiers of Materials Research: Electronic and Optical Materials. Frontiers of Materials Research: Electronic and Optical Materials 17 24 .
H.-J. Engell, A. v. Keitz & G. Sauthoff. 1991. Advanced Structural and Functional Materials. Advanced Structural and Functional Materials 91 132 .
Z.L. Wu, D.P. Pope & V. Vitek. (1990) Deformation of L12 AlTiFe single crystalline alloys. Scripta Metallurgica et Materialia 24:11, pages 2191-2196.
Crossref
S.A. Brown, K.S. Kumar & J.D. Whittenberger. (1990) Compression behavior of the forged L12 compounds Al67Ti25Cr8 and Al66Ti25Mn9. Scripta Metallurgica et Materialia 24:10, pages 2001-2006.
Crossref
K.S. Kumar. (2013) X-Ray Peak Intensities for the Binary Compound Al 3 Ti . Powder Diffraction 5:3, pages 165-166.
Crossref
E. P. George, J. A. Horton, W. D. Porter & J. H. Schneibel. (2011) Brittle cleavage of L1 2 trialuminides . Journal of Materials Research 5:8, pages 1639-1648.
Crossref
H. Mabuchi, K. Hirukawa, K. Katayama, H. Tsuda & Y. Nakayama. (1990) Formation of ternary L12 compounds in TiAl3-base alloys containing Ag. Scripta Metallurgica et Materialia 24:8, pages 1553-1558.
Crossref
T.G. Nieh & J. Wadsworth. (1990) Hot indentation tests of refractory metal beryllides. Scripta Metallurgica et Materialia 24:8, pages 1489-1494.
Crossref
H.R. Pak, J.S.L. Pak, J.M. Rigsbee & C.M. Wayman. (1990) Fabrication of the D022-type intermetallic compound Al3Ta via powder metallurgy processes and its characterization. Materials Science and Engineering: A 128:1, pages 129-139.
Crossref
R. Lerf & D.G. Morris. (1990) Mechanical alloying of AlTi alloys. Materials Science and Engineering: A 128:1, pages 119-127.
Crossref
T. Hanamura, T. Sugai & M. Tanino. (1990) Rapidly quenched intermetallic compounds, TiAl and Al3Ti. Journal of Materials Science 25:7, pages 3286-3290.
Crossref
T. Hong, T. J. Watson-Yang, A. J. Freeman, T. Oguchi & Jian-hua Xu. (1990) Crystal structure, phase stability, and electronic structure of Ti-Al intermetallics: . Physical Review B 41:18, pages 12462-12467.
Crossref
J.P. Nic, S. Zhang & D.E. Mikkola. (1990) Observations on the systematic alloying of Al3Ti with fourth period elements to yield cubic phases. Scripta Metallurgica et Materialia 24:6, pages 1099-1104.
Crossref
C. L. Fu. (2011) Electronic, elastic, and fracture properties of trialuminide alloys: Al 3 Sc and Al 3 Ti . Journal of Materials Research 5:5, pages 971-979.
Crossref
H. Mabuchi, K. Hirukawa, H. Tsuda & Y. Nakayama. (1990) Formation of structural L12 compounds in the ternary Al/1bTi/1bCr system. Scripta Metallurgica et Materialia 24:3, pages 505-508.
Crossref
Ei-ichi FURUBAYASHI. (1990) Lattice Structures and Mechanical Properties of Intermetallic Compounds Containing Titanium. Tetsu-to-Hagane 76:2, pages 158-171.
Crossref
J.P. Nic, S. Zhang & D.E. Mikkola. (2011) Alloying of Al 3 Ti With Mn and Cr to Form Cubic L1 2 Phases . MRS Proceedings 213.
Crossref
David G. Morris & Reto Lerf. (2011) Deformation and Ductility in Alloys Based on Al 3 Ti . MRS Proceedings 213.
Crossref
M. Khantha, V. Vitek & D.P. Pope. (2011) Dislocation Core Structures and Mechanical Behavior of DO 22 Type Alloys . MRS Proceedings 213.
Crossref
Mohan Paruchuri & T.B. Massalski. (2011) Phase Diagram Relationships in the Ternary System Ti-Ai-V. MRS Proceedings 213.
Crossref
E. P. George & C. T. Liu. (2011) Alloy Design of Ordered Intermetallics. MRS Proceedings 186.
Crossref
S. Zhang, J.P. Nic & D.E. Mikkola. (1990) New cubic phases formed by alloying Al3Ti with Mn and Cr. Scripta Metallurgica et Materialia 24:1, pages 57-62.
Crossref
W. O. Powers & J. A. Wert. (1990) Microstructure, deformation, and fracture characteristics of an Al67Pd8Ti25 intermetallic alloy. Metallurgical Transactions A 21:1, pages 145-151.
Crossref
P.M. Hazzledine, M.H. Yoo & Y.Q. Sun. (1989) The geometry of glide in Ni3Al at temperatures above the flow stress peak. Acta Metallurgica 37:12, pages 3235-3244.
Crossref
Hiroshi Mabuchi, Ken-ichi Hirukawa & Yutaka Nakayama. (1989) Formation of structural L12 compounds in TiAl3-base alloys containing Mn. Scripta Metallurgica 23:10, pages 1761-1765.
Crossref
C.D. Turner, W.O. Powers & J.A. Wert. (1989) Microstructure, deformation and fracture characteristics of an Al67Ni8Ti25 intermetallic alloy. Acta Metallurgica 37:10, pages 2635-2643.
Crossref
F.H. Froes, Young-Won Kim & S. Krishnamurthy. (1989) Rapid solidification of lightweight metal alloys. Materials Science and Engineering: A 117, pages 19-32.
Crossref
Hiroshi Mabuchi, Tatsuya Asai & Yutaka Nakayama. (1989) Aluminide coatings on TiAl compound. Scripta Metallurgica 23:5, pages 685-689.
Crossref
Y. Umakoshi, M. Yamaguchi, T. Sakagami & T. Yamane. (1989) Oxidation resistance of intermetallic compounds Al3Ti and TiAl. Journal of Materials Science 24:5, pages 1599-1603.
Crossref
M. H. Yoo. (2011) Deformation twinning in superlattice structures. Journal of Materials Research 4:1, pages 50-54.
Crossref

Displaying 200 of 209 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.