Citations (149)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (15)
Zhengzhi Wang, Ping Gu, Hui Zhang, Zhong Zhang & Xiaoping Wu. (2016) Indenter geometrical effects on sub-micro/nano indentation and scratch behaviors of polymeric surfaces. Mechanics of Advanced Materials and Structures 23:3, pages 291-300.
Read now
Read now
G. Guillonneau, G. Kermouche, J. Teisseire, E. Barthel, S. Bec & J.-L. Loubet. (2015) Is the second harmonic method applicable for thin films mechanical properties characterization by nanoindentation?. Philosophical Magazine 95:16-18, pages 1999-2011.
Read now
Read now
S.J. Bull. (2015) A simple method for the assessment of the contact modulus for coated systems. Philosophical Magazine 95:16-18, pages 1907-1927.
Read now
Read now
İlkay Ulusoy, Erdem Akagündüz & Gerhard-Wilhelm Weber. (2010) Inverse solution for parameter estimation of a dynamic volume spline based forehead skin model. Inverse Problems in Science and Engineering 18:5, pages 585-612.
Read now
Read now
Z.-H. Xu & X. Li. (2007) Effect of sample tilt on nanoindentation behaviour of materials. Philosophical Magazine 87:16, pages 2299-2312.
Read now
Read now
G. Kermouche, J. L. Loubet & J. M. Bergheau. (2006) A new index to estimate the strain rate sensitivity of glassy polymers using conical/pyramidal indentation. Philosophical Magazine 86:33-35, pages 5667-5677.
Read now
Read now
S. Bec, A. Tonck & J. L. Loubet. (2006) A simple guide to determine elastic properties of films on substrate from nanoindentation experiments. Philosophical Magazine 86:33-35, pages 5347-5358.
Read now
Read now
S. Bec, A. Tonck & J. Fontaine. (2006) Nanoindentation and nanofriction on DLC films. Philosophical Magazine 86:33-35, pages 5465-5476.
Read now
Read now
E. Felder & C. Ramond-Angélélis. (2006) Mechanical analysis of indentation experiments with a conical indenter. Philosophical Magazine 86:33-35, pages 5219-5230.
Read now
Read now
Yong Yee Lim
& M. Munawar Chaudhri
. (2003) Experimental investigations of the normal loading of elastic spherical and conical indenters on to elastic flats
. Philosophical Magazine 83:30, pages 3427-3462.
Read now
Read now
O. Rodríguez de la Fuente, M. A. González & J. M. Rojo. (2003) Dislocation configurations around a nanoindentation in the surface of a fcc metal. Philosophical Magazine 83:4, pages 485-502.
Read now
Read now
K. Miyahara, N. Nagashima & S. Matsuoka. (2002) Development and application of a combined atomic force microscopy-nanoindentation system with a silicon tip and a diamond indenter. Philosophical Magazine A 82:10, pages 2149-2160.
Read now
Read now
Nicholas X. Randall. (2002) Direct measurement of residual contact area and volume during the nanoindentation of coated materials as an alternative method of calculating hardness. Philosophical Magazine A 82:10, pages 1883-1892.
Read now
Read now
Yong Yee Lim & M. Munawar Chaudhri. (1999) The effect of the indenter load on the nanohardness of ductile metals: An experimental study on polycrystalline work-hardened and annealed oxygen-free copper. Philosophical Magazine A 79:12, pages 2979-3000.
Read now
Read now
G. Hochstetter, A. Jimenez & J.L. Loubet. (1999) Strain-rate effects on hardness of glassy polymers in the nanoscale range. Comparison between quasi-static and continuous stiffness measurements. Journal of Macromolecular Science, Part B 38:5-6, pages 681-692.
Read now
Read now
Articles from other publishers (134)
Fenglei Xu, Guijing Dou, Jianfeng Chen, Hanyang Jiang, Taihua Zhang & Guangjian Peng. (2024) A Correction Function to Improve the Accuracy of Measuring Elastic Modulus by Instrumented Spherical Indentation. Journal of Testing and Evaluation 52:4, pages 20230320.
Crossref
Crossref
Prakash Sarkar & Sandhya Verma. (2024) Effect of Viscous Behavior on Young’s Modulus Estimation of Thermoplastic Glassy Polymers via Nanoindentation. Journal of Materials Engineering and Performance.
Crossref
Crossref
Zhentao Li, Yun Ye, Guanjun Zhang, Fengjiao Guan, Junjie Luo, Panfeng Wang, Jiao Zhao & Li Zhao. (2023) Research on Determining Elastic–Plastic Constitutive Parameters of Materials from Load Depth Curves Based on Nanoindentation Technology. Micromachines 14:5, pages 1051.
Crossref
Crossref
Iakov A. Lyashenko, Valentin L. Popov & Vadym Borysiuk. (2023) Experimental Verification of the Boundary Element Method for Adhesive Contacts of a Coated Elastic Half-Space. Lubricants 11:2, pages 84.
Crossref
Crossref
D. Chicot, A. Mejias, F. Roudet, A. Montagne, D. Betrancourt & T. Coorevits. (2022) Self-calibration in compliance and indenter tip defect for instrumented indentation. Journal of Materials Research 37:17, pages 2775-2792.
Crossref
Crossref
Vincent Fauvel, Yves Gaillard, Raphaël Guillemet, Patrick Garabédian & Fabrice Richard. (2022) Simultaneous extraction of the elastic-plastic properties of a thin film and its substrate from an identifiability-based design of depth-sensing nanoindentation testing. Journal of the Mechanics and Physics of Solids 163, pages 104860.
Crossref
Crossref
Simón Roa, Martín Sirena, Carolina Redondo & Rafael Morales. (2022) AFM nanoindentation-based mechanical investigation of 3D confinement effects on nanoarchitectonic arrays of Ag nanodisks. Journal of Physics and Chemistry of Solids 163, pages 110605.
Crossref
Crossref
Javier Gil, José Angel Delgado-García-Menocal, Eugenio Velasco-Ortega, Begoña Bosch, Luis Delgado, Román Pérez-Antoñanzas & Mariano Fernández-Fairén. (2021) Comparison of zirconia degradation in dental implants and femoral balls: an X-ray diffraction and nanoindentation study. International Journal of Implant Dentistry 7:1.
Crossref
Crossref
Akinsanya D. Baruwa, Olayinka O. Abegunde, Esther T. Akinlabi, Oluseyi P. Oladijo, Elizabeth M. Makhatha, Omolayo M. Ikumapayi, Shree Krishna & Jyotsna Dutta Majumdar. (2021) Radio Frequency Magnetron Sputtering Coatings of Biomedical Implants Using Nanostructured Titanium Carbide Thin films. Journal of Bio- and Tribo-Corrosion 7:4.
Crossref
Crossref
M. Bentoumi, E.H. Raouache, Z. Driss, A. Montagne, A. Iost, A. Mejias & D. Chicot. (2021) Multicyclic indentation on brittle glasses. Ceramics International 47:18, pages 26168-26177.
Crossref
Crossref
Solène Comby-Dassonneville, Gabrielle Tiphéne, Alejandro Borroto, Gaylord Guillonneau, Lucian Roiban, Guillaume Kermouche, Jean-François Pierson, Jean-Luc Loubet & Philippe Steyer. (2021) Real-time high-temperature scanning indentation: Probing physical changes in thin-film metallic glasses. Applied Materials Today 24, pages 101126.
Crossref
Crossref
S. Habibi, D. Chicot, A. Mejias, B. Boutabout, E. Zareb, D. E. Semsoum, S. Benaissa, A. Mezough & H. Merzouk. (2021) The P–h2 relationship on load–displacement curve considering pile-up deformation mode in instrumented indentation. Journal of Materials Research 36:15, pages 3074-3085.
Crossref
Crossref
Gabrielle Tiphéne, Paul Baral, Solène Comby-Dassonneville, Gaylord Guillonneau, Guillaume Kermouche, Jean-Michel Bergheau, Warren Oliver & Jean-Luc Loubet. (2021) High-Temperature Scanning Indentation: A new method to investigate in situ metallurgical evolution along temperature ramps. Journal of Materials Research 36:12, pages 2383-2396.
Crossref
Crossref
Simón Roa & Martín Sirena. (2021) Elastic behavior analysis of multilayers by finite element method. Engineering Research Express 3:2, pages 022002.
Crossref
Crossref
Mohamad Idriss, Olivier Bartier, Gérard Mauvoisin & Xavier Hernot. (2021) A phenomenological study of the influence of the hardening type on the indentation F-h cyclic curve. International Journal of Mechanical Sciences 197, pages 106336.
Crossref
Crossref
Fabien Volpi, Morgan Rusinowicz, Solène Comby-Dassonneville, Guillaume Parry, Chaymaa Boujrouf, Muriel Braccini, Didier Pellerin & Marc Verdier. (2021) Resistive-nanoindentation on gold: Experiments and modeling of the electrical contact resistance. Review of Scientific Instruments 92:3.
Crossref
Crossref
Sylvain Meille. 2021. Encyclopedia of Materials: Technical Ceramics and Glasses. Encyclopedia of Materials: Technical Ceramics and Glasses
745
761
.
Olayinka Oluwatosin Abegunde, Esther Titilayo Akinlabi & Oluseyi Philip Oladijo. 2021. Trends in Manufacturing and Engineering Management. Trends in Manufacturing and Engineering Management
583
590
.
Olayinka Oluwatosin Abegunde, Esther Titilayo Akinlabi & Oluseyi Philip Oladijo. 2021. Trends in Manufacturing and Engineering Management. Trends in Manufacturing and Engineering Management
145
155
.
Jianghong Gong, Bin Deng, Haipeng Qiu & Danyu Jiang. (2020) Description of the nanoindentation unloading curves with a universal function: Theoretical consideration and applications to brittle materials. Materials Chemistry and Physics 251, pages 123165.
Crossref
Crossref
Olayinka Oluwatosin Abegunde, Esther Titilayo Akinlabi & Oluseyi Philip Oladijo. (2020) RETRACTED: Influence of sputtering parameters on the structural and mechanical properties of TiC thin film coating. Applied Surface Science 520, pages 146323.
Crossref
Crossref
Olayinka Oluwatosin Abegunde, Esther Titilayo Akinlabi & Philip Oluseyi Oladijo. (2020) Dataset on microstructural, structural and tribology characterization of TiC thin film on CpTi substrate grown by RF magnetron sputtering. Data in Brief 29, pages 105205.
Crossref
Crossref
L.B. Coelho, S. Kossman, A. Mejias, X. Noirfalise, A. Montagne, A. Van Gorp, M. Poorteman & M.-G. Olivier. (2020) Mechanical and corrosion characterization of industrially treated 316L stainless steel surfaces. Surface and Coatings Technology 382, pages 125175.
Crossref
Crossref
Olayinka Abegunde, Esther Akinlabi & Philip Oladijo. (2020) Influence of TiC thin film growth morphology deposited by RF magnetron sputtering on the mechanical and tribology properties of Ti6Al4V. Materials Today: Proceedings 26, pages 1469-1472.
Crossref
Crossref
S. Meille, M. Gallo, P. Clément, S. Tadier & J. Chevalier. (2019) Spherical instrumented indentation as a tool to characterize porous bioceramics and their resorption. Journal of the European Ceramic Society 39:15, pages 4459-4472.
Crossref
Crossref
Gaylord Guillonneau, Jeffrey M. Wheeler, Juri Wehrs, Laetitia Philippe, Paul Baral, Heinz Werner Höppel, Mathias Göken & Johann Michler. (2019) Determination of the true projected contact area by in situ indentation testing. Journal of Materials Research 34:16, pages 2859-2868.
Crossref
Crossref
Thierry Coorevits, Stephania Kossman, Didier Chicot, François Hennebelle, Alex Montagne & Alain Iost. (2019) Virtual machine concept applied to uncertainties estimation in instrumented indentation testing. Journal of Materials Research 34:14, pages 2501-2516.
Crossref
Crossref
N. Menga, C. Putignano, L. Afferrante & G. Carbone. (2019) The Contact Mechanics of Coated Elastic Solids: Effect of Coating Thickness and Stiffness. Tribology Letters 67:1.
Crossref
Crossref
Nadia Chakroun, Aymen Tekaya, Hedi Belhadjsalah & Tarek Benameur. 2019. Advances in Mechanical Engineering and Mechanics. Advances in Mechanical Engineering and Mechanics
47
53
.
Nadia Chakroun & Hedi Belhadjsalah. 2019. Materials Design and Applications II. Materials Design and Applications II
453
466
.
Angel Ochoa Brezmes & Cornelia Breitkopf. (2018) Influence of indenter tip diameter and film thickness on flat indentations into elastic-plastic films by means of the finite element method. Thin Solid Films 653, pages 49-56.
Crossref
Crossref
A. Mejias, D. Chicot, A. Pertuz, A. Iost, A. Montagne & P. Cadenas. (2018) Hardness evaluation from a bilayer coating system of Ni-P deposited on carbon steel plates by multicycle indentation tests. Surface and Coatings Technology 334, pages 410-419.
Crossref
Crossref
Arnaud Gerthoffer, Christophe Poulain, Frédéric Roux, Fabrice Emieux, Louis Grenet & Simon Perraud. (2017) CIGS solar cells on ultra-thin glass substrates: Determination of mechanical properties by nanoindentation and application to bending-induced strain calculation. Solar Energy Materials and Solar Cells 166, pages 254-261.
Crossref
Crossref
Zhaoliang Qu, Qiang Zhang, Rujie He, Yongmao Pei & Daining Fang. (2017) Characterization of oxidation film on SiC ceramic substrate based on indentation method. Ceramics International 43:5, pages 4399-4404.
Crossref
Crossref
Hashina Parveen ANWAR ALI & Arief BUDIMAN. (2017) Designing Novel Metallic Multilayer Nanocomposites Through Atomic Engineering of Interfaces – Influence of Heat of Mixing. Procedia Engineering 215, pages 226-237.
Crossref
Crossref
Naoki Fujisawa, Teng Fei Zhang, Byoung Hun Lee & Kwang Ho Kim. (2016) A robust method for extracting the mechanical properties of thin films with rough surfaces by nanoindentation. Journal of Materials Research 31:23, pages 3777-3785.
Crossref
Crossref
S. Msolli, J. Alexis, H.S. Kim, O. Dalverny & M. Karama. (2016) Assessment of candidate metallization systems deposited on diamond using nano-indentation and nano-scratching tests. Thin Solid Films 619, pages 53-60.
Crossref
Crossref
A. Rubin, D. Favier, P. Danieau, M. Giraudel, J-P. Chambard & C. Gauthier. (2016) Direct observation of contact on non transparent viscoelastic polymers surfaces: A new way to study creep and recovery. Progress in Organic Coatings 99, pages 134-139.
Crossref
Crossref
Vincent Jardret. 2016. Medical Coatings and Deposition Technologies. Medical Coatings and Deposition Technologies
605
630
.
Dimitrios A. Dragatogiannis, Elias P. Koumoulos, Ioannis A Kartsonakis & Costas A. Charitidis. (2016) Deformation mechanism during nanoindentation creep and corrosion resistance of Zn. International Journal of Structural Integrity 7:1, pages 47-69.
Crossref
Crossref
D. Chicot, M. Yetna N’Jock, F. Roudet, X. Decoopman, M.H. Staia & E.S. Puchi-Cabrera. (2016) Some improvements for determining the hardness of homogeneous materials from the work-of-indentation. International Journal of Mechanical Sciences 105, pages 279-290.
Crossref
Crossref
Sina Amiri, Xi Chen, Andrea Manes & Marco Giglio. (2016) Investigation of the mechanical behaviour of lithium-ion batteries by an indentation technique. International Journal of Mechanical Sciences 105, pages 1-10.
Crossref
Crossref
J. Yang, V. Fridrici, M. Messaadi & Ph. Kapsa. (2015) The effect of porous substrate on the tribological performance of a MoS 2 based coating in fretting by statistical analysis. Wear 330-331, pages 122-135.
Crossref
Crossref
E.S. Puchi-Cabrera, M.H. Staia & A. Iost. (2015) A description of the composite elastic modulus of multilayer coated systems. Thin Solid Films 583, pages 177-193.
Crossref
Crossref
G. Minatchy, P. Thomas, P. Bilas, N. Nomede-Martyr & L. Romana. (2014) Macro- and Nanotribological Properties of Graphite Tribofilms: Influence of the Sliding Interface. Tribology Letters 56:3, pages 443-456.
Crossref
Crossref
G. Guillonneau, G. Kermouche, S. Bec & J.-L. Loubet. (2014) A simple method to minimize displacement measurement uncertainties using dynamic nanoindentation testing. Tribology International 70, pages 190-198.
Crossref
Crossref
Michael Burkinshaw, Anne Neville, Ardian Morina & Mike Sutton. (2014) ZDDP and its interactions with an organic antiwear additive on both aluminium–silicon and model silicon surfaces. Tribology International 69, pages 102-109.
Crossref
Crossref
L. Hemmouche, D. Chicot, A. Amrouche, A. Iost, M.A. Belouchrani, X. Decoopman, G. Louis & E.S. Puchi-Cabrera. (2013) An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques. Materials Science and Engineering: A 585, pages 155-164.
Crossref
Crossref
Galina Lasko, Zaklina Burghard, Joachim Bill, Immanuel Schäfer, Ulrich Weber & Siegfried Schmauder. (2013)
Simulation of Mechanical Properties of Bio‐
I
nspired Ti
O
2
/
PE
Nanocomposites
. Advanced Engineering Materials 15:10, pages 908-920.
Crossref
Crossref
Yong Ma, Ying Zhang, Xiaohong Yao, Xiangyu Zhang, Xuefeng Shu & Bin Tang. (2013) Characterization of Mo surface modified Ti by indentation techniques. Surface and Coatings Technology 226, pages 75-81.
Crossref
Crossref
M.J. Wald, J.M. Considine & K.T. Turner. (2013) Determining the Elastic Modulus of Compliant Thin Films Supported on Substrates from Flat Punch Indentation Measurements. Experimental Mechanics 53:6, pages 931-941.
Crossref
Crossref
Julien van Kuilenburg, Marc A Masen & Emile van der Heide. (2012) Contact modelling of human skin: What value to use for the modulus of elasticity?. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 227:4, pages 349-361.
Crossref
Crossref
J. Yang, V. Fridrici, M. Messaadi & Ph. Kapsa. (2013) Survival and factorial analysis of durability and friction coefficient of a solid lubricant under different working conditions. Wear 302:1-2, pages 998-1009.
Crossref
Crossref
Jian Chen, Xinli Guo, Quan Tang, Chongyuan Zhuang, Jianshuang Liu, Shenqing Wu & Ben D. Beake. (2013) Nanomechanical properties of graphene on poly(ethylene terephthalate) substrate. Carbon 55, pages 144-150.
Crossref
Crossref
S. Bec, J. Fontaine, M. Belin, T. Takeno & H. Miki. (2013) Propriétés mécaniques de tribofilms formés dans un contact frottant CuDLC / acier. Matériaux & Techniques 101:3, pages 304.
Crossref
Crossref
Gaylord Guillonneau, Guillaume Kermouche, Sandrine Bec & Jean-Luc Loubet. (2012) Determination of mechanical properties by nanoindentation independently of indentation depth measurement. Journal of Materials Research 27:19, pages 2551-2560.
Crossref
Crossref
G. Guillonneau, G. Kermouche, S. Bec & J.-L. Loubet. (2011) Extraction of Mechanical Properties with Second Harmonic Detection for Dynamic Nanoindentation Testing. Experimental Mechanics 52:7, pages 933-944.
Crossref
Crossref
Z.S. Ma, Y.C. Zhou, S.G. Long & C.S. Lu. (2012) An Inverse Approach for Extracting Elastic–plastic Properties of Thin Films from Small Scale Sharp Indentation. Journal of Materials Science & Technology 28:7, pages 626-635.
Crossref
Crossref
O.G. Lysenko. (2012) Multifunction Scanning Probe Microscope with Diamond Tip. Nanotechnological Research at Ambient Conditions. Nauka ta innovacii 8:2, pages 8-12.
Crossref
Crossref
Michael Burkinshaw, Anne Neville, Ardian Morina & Mike Sutton. (2012) Calcium sulphonate and its interactions with ZDDP on both aluminium–silicon and model silicon surfaces. Tribology International 46:1, pages 41-51.
Crossref
Crossref
Jiangting Wang, Peter D. Hodgson & Chunhui Yang. (2011) Effects of mechanical properties on the contact profile in Berkovich nanoindentation of elastoplastic materials. Journal of Materials Research 27:1, pages 313-319.
Crossref
Crossref
V. Le Saux, Y. Marco, G. Bles, S. Calloch, S. Moyne, S. Plessis & P. Charrier. (2011) Identification of constitutive model for rubber elasticity from micro-indentation tests on natural rubber and validation by macroscopic tests. Mechanics of Materials 43:12, pages 775-786.
Crossref
Crossref
Toshio Osada, Nobuo Nagashima, Yuefeng Gu, Yong Yuan, Tadaharu Yokokawa & Hiroshi Harada. (2011) Factors contributing to the strength of a polycrystalline nickel–cobalt base superalloy. Scripta Materialia 64:9, pages 892-895.
Crossref
Crossref
Jennifer Hay & Bryan Crawford. (2011) Measuring substrate-independent modulus of thin films. Journal of Materials Research 26:6, pages 727-738.
Crossref
Crossref
Maria Datcheva, Sabina Cherneva, Maria Stoycheva, Roumen Iankov & Dimitar Stoychev. (2011) Determination of Anodized Aluminum Material Characteristics by Means of Nano-Indentation Measurements. Materials Sciences and Applications 02:10, pages 1452-1464.
Crossref
Crossref
B. C. Prorok, B. Frye, B. Zhou & K. Schwieker. 2011. MEMS and Nanotechnology, Volume 4. MEMS and Nanotechnology, Volume 4
39
43
.
B. Zhou, K. Schwieker, B. Frye & B. C. Prorok. 2011. MEMS and Nanotechnology, Volume 4. MEMS and Nanotechnology, Volume 4
75
81
.
Bo Zhou & Barton C. Prorok. (2011) A new paradigm in thin film indentation. Journal of Materials Research 25:9, pages 1671-1678.
Crossref
Crossref
S. Roy, E. Darque-Ceretti, E. Felder, F. Raynal & I. Bispo. (2010) Experimental analysis and finite element modelling of nano-scratch test applied on 40–120nm SiCN thin films deposited on Cu/Si substrate. Thin Solid Films 518:14, pages 3859-3865.
Crossref
Crossref
Lucas A. Berla, Aileen M. Allen, Seung Min Han & William D. Nix. (2011) A physically based model for indenter tip shape calibration for nanoindentation. Journal of Materials Research 25:4, pages 735-745.
Crossref
Crossref
Jacques Breuils, Hervé Pelletier, Joël Krier & Vincent Vignal. (2010) Determination of elastoplastic properties of TiO2 thin films deposited on dual phase stainless steel using nanoindentation tests. Surface and Coatings Technology 204:12-13, pages 2068-2072.
Crossref
Crossref
Pablo Sevilla, Clara Sandino, Milena Arciniegas, Jordi Martínez-Gomis, Maria Peraire & Francisco Javier Gil. (2010) Evaluating mechanical properties and degradation of YTZP dental implants. Materials Science and Engineering: C 30:1, pages 14-19.
Crossref
Crossref
C.A. Charitidis. (2010) Nanomechanical and nanotribological properties of carbon-based thin films: A review. International Journal of Refractory Metals and Hard Materials 28:1, pages 51-70.
Crossref
Crossref
Jaroslav Menčík, Li Hong He & Michael V. Swain. (2009) Determination of viscoelastic–plastic material parameters of biomaterials by instrumented indentation. Journal of the Mechanical Behavior of Biomedical Materials 2:4, pages 318-325.
Crossref
Crossref
Jennifer Hay. (2011) Measuring substrate-independent modulus of dielectric films by instrumented indentation. Journal of Materials Research 24:3, pages 667-677.
Crossref
Crossref
R. Côte, T. Van der Donck, J.-P. Celis & C. Glorieux. (2009) Surface acoustic wave characterization of a thin, rough polymer film. Thin Solid Films 517:8, pages 2697-2701.
Crossref
Crossref
O. Lysenko, N. Novikov, V. Grushko, A. Shcherbakov, A. Katrusha, S. Ivakhnenko, V. Tkach & A. Gontar. (2008) Fabrication and characterization of single crystal semiconductive diamond tip for combined scanning tunneling microscopy. Diamond and Related Materials 17:7-10, pages 1316-1319.
Crossref
Crossref
N. Fujisawa & M.V. Swain. (2011) Mechanical properties characterization of a viscoelastic solid using low-frequency large-amplitude oscillatory indentations with a sharp tip. Journal of Materials Research 23:6, pages 1557-1563.
Crossref
Crossref
C. Pailler-Mattei, S. Bec & H. Zahouani. (2008) In vivo measurements of the elastic mechanical properties of human skin by indentation tests. Medical Engineering & Physics 30:5, pages 599-606.
Crossref
Crossref
G. Kermouche, J.L. Loubet & J.M. Bergheau. (2008) Extraction of stress–strain curves of elastic–viscoplastic solids using conical/pyramidal indentation testing with application to polymers. Mechanics of Materials 40:4-5, pages 271-283.
Crossref
Crossref
Roman Heuberger, Antonella Rossi & Nicholas D. Spencer. (2007) Pressure Dependence of ZnDTP Tribochemical Film Formation: A Combinatorial Approach. Tribology Letters 28:2, pages 209-222.
Crossref
Crossref
C. Pailler-Mattei, S. Pavan, R. Vargiolu, F. Pirot, F. Falson & H. Zahouani. (2007) Contribution of stratum corneum in determining bio-tribological properties of the human skin. Wear 263:7-12, pages 1038-1043.
Crossref
Crossref
Maksym Rybachuk & John M. Bell. (2007) The effect of sp2 fraction and bonding disorder on micro-mechanical and electronic properties of a-C:H films. Thin Solid Films 515:20-21, pages 7855-7860.
Crossref
Crossref
P. Lemoine, J.P. Quinn, P.D. Maguire, J.F. Zhao & J.A. McLaughlin. (2007) Intrinsic mechanical properties of ultra-thin amorphous carbon layers. Applied Surface Science 253:14, pages 6165-6175.
Crossref
Crossref
Naoki Fujisawa & Michael V. Swain. (2011) On the indentation contact area of a creeping solid during constant-strain-rate loading by a sharp indenter. Journal of Materials Research 22:4, pages 893-899.
Crossref
Crossref
O Lysenko, N Novikov, A Gontar, V Grushko & A Shcherbakov. (2007) Combined Scanning Nanoindentation and Tunneling Microscope Technique by Means of Semiconductive Diamond Berkovich Tip. Journal of Physics: Conference Series 61, pages 740-744.
Crossref
Crossref
G. Kermouche, J.L. Loubet & J.M. Bergheau. (2007) Cone indentation of time-dependent materials: The effects of the indentation strain rate. Mechanics of Materials 39:1, pages 24-38.
Crossref
Crossref
Karim Demmou, Sandrine Bec, Jean-Luc Loubet & Jean-Michel Martin. (2006) Temperature effects on mechanical properties of zinc dithiophosphate tribofilms. Tribology International 39:12, pages 1558-1563.
Crossref
Crossref
Yong Yee Lim & M. Munawar Chaudhri. (2006) Indentation of elastic solids with a rigid Vickers pyramidal indenter. Mechanics of Materials 38:12, pages 1213-1228.
Crossref
Crossref
D. Kaczorowski & J.Ph. Vernot. (2006) Wear problems in nuclear industry. Tribology International 39:10, pages 1286-1293.
Crossref
Crossref
K. Kese & Z.C. Li. (2006) Semi-ellipse method for accounting for the pile-up contact area during nanoindentation with the Berkovich indenter. Scripta Materialia 55:8, pages 699-702.
Crossref
Crossref
Haitao Xu & G.M. Pharr. (2006) An improved relation for the effective elastic compliance of a film/substrate system during indentation by a flat cylindrical punch. Scripta Materialia 55:4, pages 315-318.
Crossref
Crossref
Ilze Manika & Janis Maniks. (2006) Size effects in micro- and nanoscale indentation. Acta Materialia 54:8, pages 2049-2056.
Crossref
Crossref
Maksym Rybachuk & John M. Bell. (2006) The observation of sp2 fraction disorder using dual wavelength Raman spectroscopy in a-C:H films fabricated using an open inductively coupled plasma reactor. Diamond and Related Materials 15:4-8, pages 977-981.
Crossref
Crossref
Naoki Fujisawa & Michael V. Swain. (2006) Effect of unloading strain rate on the elastic modulus of a viscoelastic solid determined by nanoindentation. Journal of Materials Research 21:3, pages 708-714.
Crossref
Crossref
E. Gacoin, C. Fretigny, A. Chateauminois, A. Perriot & E. Barthel. (2006) Measurement of the mechanical properties of thin films mechanically confined within contacts. Tribology Letters 21:3, pages 245-252.
Crossref
Crossref
J. Cayer-Barrioz, D. Mazuyer, A. Tonck, Ph. Kapsa & A. Chateauminois. (2006) Nanoscratch and friction: An innovative approach to understand the tribological behaviour of poly(amide) fibres. Tribology International 39:2, pages 62-69.
Crossref
Crossref
J. Cayer-Barrioz, D. Mazuyer, A. Tonck, Ph. Kapsa & A. Chateauminois. 2006. Scratching of Materials and Applications. Scratching of Materials and Applications
85
101
.
S.M. Chung & A.U.J. Yap. (2005) Effects of surface finish on indentation modulus and hardness of dental composite restoratives. Dental Materials 21:11, pages 1008-1016.
Crossref
Crossref
Guillaume Kermouche, Jean-Luc Loubet & Jean-Michel Bergheau. (2005) An approximate solution to the problem of cone or wedge indentation of elastoplastic solids. Comptes Rendus. Mécanique 333:5, pages 389-395.
Crossref
Crossref
M. A. Nicholls, P. R. Norton, G. M. Bancroft, M. Kasrai, G. De. Stasio & L. M. Wiese. (2005) Spatially resolved nanoscale chemical and mechanical characterization of ZDDP antiwear films on aluminum?silicon alloys under cylinder/bore wear conditions. Tribology Letters 18:3, pages 261-278.
Crossref
Crossref
J. Cayer‐Barrioz, A. Tonck, D. Mazuyer, Ph. Kapsa & A. Chateauminois. (2004) Nanoscale mechanical characterization of polymeric fibers. Journal of Polymer Science Part B: Polymer Physics 43:3, pages 264-275.
Crossref
Crossref
Tsunetaka Sumomogi, Masashi Yoshida, Masayoshi Nakamura, Hiroto Osono & Takao Kino. (2005) Nanoscale Mechanical Properties of Ultrahigh-Purity Aluminum. MATERIALS TRANSACTIONS 46:9, pages 1996-2002.
Crossref
Crossref
M. Matheron, T. Gacoin, J.-P. Boilot, A. Bourgeois, A. Brunet-Bruneau, J. Rivory, A. Jimenez & J. Biteau. 2005. Nanoporous Materials IV, Proceedings of the 4th International Symposium on Nanoporous Materials. Nanoporous Materials IV, Proceedings of the 4th International Symposium on Nanoporous Materials
327
334
.
S. Bec, A. Tonck, J. M. Georges & G. W. Roper. (2004) Synergistic Effects of MoDTC and ZDTP on Frictional Behaviour of Tribofilms at the Nanometer Scale. Tribology Letters 17:4, pages 797-809.
Crossref
Crossref
Yang-Tse Cheng & Che-Min Cheng. (2004) Scaling, dimensional analysis, and indentation measurements. Materials Science and Engineering: R: Reports 44:4-5, pages 91-149.
Crossref
Crossref
P Bruno, G Cicala, A.M Losacco & P Decuzzi. (2004) Mechanical properties of PECVD hydrogenated amorphous carbon coatings via nanoindentation and nanoscratching techniques. Surface and Coatings Technology 180-181, pages 259-264.
Crossref
Crossref
Tsunetaka Sumomogi, Masashi Yoshida, Masayoshi Nakamura, Hiroto Osono & Takao Kino. (2004) Mechanical Properties of Ultra High-Purity Aluminum. Journal of the Japan Institute of Metals 68:11, pages 958-964.
Crossref
Crossref
W.C. Oliver & G.M. Pharr. (2011) Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. Journal of Materials Research 19:1, pages 3-20.
Crossref
Crossref
G. Hochstetter, A. Jimenez, J.P. Cano & E. Felder. (2003) An attempt to determine the true stress-strain curves of amorphous polymers by nanoindentation. Tribology International 36:12, pages 973-985.
Crossref
Crossref
Ting Y. Tsui, C. A. Ross & G. M. Pharr. (2011) A method for making substrate-independent hardness measurements of soft metallic films on hard substrates by nanoindentation. Journal of Materials Research 18:6, pages 1383-1391.
Crossref
Crossref
M. Verdier, M. Montagnat, S. Maîtrejean & G. Passemard. (2011)
Investigation of mechanical properties of mesoporous methyl-substituted SiO
2
thin films (Methylsilesquioxane materials).
. MRS Proceedings 795.
Crossref
Crossref
S. Roche, S. Bec & J.L. Loubet. (2011) Analysis of the Elastic Modulus of a Thin Polymer Film. MRS Proceedings 778.
Crossref
Crossref
A Chateauminois & B.J Briscoe. (2003) Nano-rheological properties of polymeric third bodies generated within fretting contacts. Surface and Coatings Technology 163-164, pages 435-443.
Crossref
Crossref
W Veiga & C.M Lepienski. (2002) Nanomechanical properties of lead iodide (PbI2) layered crystals. Materials Science and Engineering: A 335:1-2, pages 6-13.
Crossref
Crossref
P Bertrand-Lambotte, J.L Loubet, C Verpy & S Pavan. (2001) Nano-indentation, scratching and atomic force microscopy for evaluating the mar resistance of automotive clearcoats: study of the ductile scratches. Thin Solid Films 398-399, pages 306-312.
Crossref
Crossref
Yong Yee Lim & M Munawar Chaudhri. (2001) Do residual nano indentations in metals and ceramics relax with time?. Journal of Physics D: Applied Physics 34:13, pages L70-L78.
Crossref
Crossref
Damien Kaczorowski, Jean-Mary Georges, Sandrine Bec, André Tonck, André Bernard Vannes & Jean-Philippe Vernot. (2001) Wear of a stainless steel in pressurised high temperature water. Comptes Rendus de l'Académie des Sciences - Series IV - Physics 2:5, pages 739-747.
Crossref
Crossref
J. Shieh & M.H. Hon. (2001) Nanostructure and hardness of titanium aluminum nitride prepared by plasma enhanced chemical vapor deposition. Thin Solid Films 391:1, pages 101-108.
Crossref
Crossref
E Martínez. (2001) Study of the mechanical properties of tetrahedral amorphous carbon films by nanoindentation and nanowear measurements. Diamond and Related Materials 10:2, pages 145-152.
Crossref
Crossref
P. Bertrand-Lambotte, J.L. Loubet & C. Verpy. 2001. Tribology Research: From Model Experiment to Industrial Problem - A Century of Efforts in Mechanics, Materials Science and Physico-Chemistry, Proceedings of the 27th Leeds-Lyon Symposium on Tribology. Tribology Research: From Model Experiment to Industrial Problem - A Century of Efforts in Mechanics, Materials Science and Physico-Chemistry, Proceedings of the 27th Leeds-Lyon Symposium on Tribology
883
893
.
D. Mazuyer, A. Tonck, S. Bec, J.-L. Loubet & J.-M. Georges. 2001. Tribology Research: From Model Experiment to Industrial Problem - A Century of Efforts in Mechanics, Materials Science and Physico-Chemistry, Proceedings of the 27th Leeds-Lyon Symposium on Tribology. Tribology Research: From Model Experiment to Industrial Problem - A Century of Efforts in Mechanics, Materials Science and Physico-Chemistry, Proceedings of the 27th Leeds-Lyon Symposium on Tribology
273
282
.
S. Bec, A. Tonck, J. M. Georges, R. C. Coy, J. C. Bell & G. W. Roper. (1999) Relationship between mechanical properties and structures of zinc dithiophosphate anti–wear films. Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences 455:1992, pages 4181-4203.
Crossref
Crossref
N.K Kuromoto, D.L Fiusa, M.P Cantão & C.M Lepienski. (1999) Nanoscratching characterization of austenitic stainless steel modified by cathodic hydrogenation. Materials Science and Engineering: A 269:1-2, pages 83-89.
Crossref
Crossref
Y. Y. Lim, M. M. Chaudhri & Y. Enomoto. (2011) Accurate determination of the mechanical properties of thin aluminum films deposited on sapphire flats using nanoindentations. Journal of Materials Research 14:6, pages 2314-2327.
Crossref
Crossref
A Tonck, S Bec, D Mazuyer, J-M Georges & A. A. Lubrecht. (2005) The École Centrale de Lyon surface force apparatus: An application overview. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 213:5, pages 353-361.
Crossref
Crossref
A. Tonck, S. Bec, J.M. Georges, R.C. Coy, J.C. Bell & G.W. Roper. 1999. Lubrication at the Frontier - The Role of the Interface and Surface Layers in the Thin Film and Boundary Regime, Proceedings of the 25th Leeds-Lyon Symposium on Tribology. Lubrication at the Frontier - The Role of the Interface and Surface Layers in the Thin Film and Boundary Regime, Proceedings of the 25th Leeds-Lyon Symposium on Tribology
39
47
.
Yang-Tse Cheng & Che-Min Cheng. (1998) Scaling approach to conical indentation in elastic-plastic solids with work hardening. Journal of Applied Physics 84:3, pages 1284-1291.
Crossref
Crossref
J. D. Kiely & J. E. Houston. (1998) Nanomechanical properties of Au (111), (001), and (110) surfaces. Physical Review B 57:19, pages 12588-12594.
Crossref
Crossref
A. Tonck & S. Bec. (2011) Nano-Machining With A Surface Force Apparatus. MRS Proceedings 522.
Crossref
Crossref
Yang-Tse Cheng & Che-Min Cheng. (2011) Scaling Relationships in Conical Indentation in Elastic-Plastic Solids with Work-Hardening. MRS Proceedings 522.
Crossref
Crossref
N.X Randall, C Julia-Schmutz, J.M Soro, J von Stebut & G Zacharie. (1997) Novel nanoindentation method for characterising multiphase materials. Thin Solid Films 308-309, pages 297-303.
Crossref
Crossref
Shefford P Baker. (1997) Between nanoindentation and scanning force microscopy: measuring mechanical properties in the nanometer regime. Thin Solid Films 308-309, pages 289-296.
Crossref
Crossref
Simón Andre Roa, Martín Sirena, Carolina Redondo & Rafael Morales. (2021) Effects of 3-D Confinement on the Mechanical Behavior of Ag Nanodisks: Novel Insights into Nanomaterials Mechanics. SSRN Electronic Journal.
Crossref
Crossref