Citations (79)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
Shigeo Saimoto, Marek Niewczas, Michael R. Langille & Bradley Diak. (2019) Specific resistivity of dislocations and vacancies for super-pure aluminium at 4.2 K determined in-situ and post-recovery deformation and correlated to flow stress. Philosophical Magazine 99:22, pages 2770-2788.
Read now
Read now
X. H. Fan, M. Li, D. Y. Li, Y. C. Shao, S. R. Zhang & Y. H. Peng. (2014) Dynamic recrystallisation and dynamic precipitation in AA6061 aluminium alloy during hot deformation. Materials Science and Technology 30:11, pages 1263-1272.
Read now
Read now
E Sjölander & S Seifeddine. (2013) Influence of alloy composition, solidification rate and artificial aging on plastic deformation behaviour of Al–Si–Cu–Mg casting alloys. International Journal of Cast Metals Research 26:1, pages 28-36.
Read now
Read now
A. Deschamps, F. Bley, F. Livet, D. Fabregue & L. David. (2003) In-situ small-angle X-ray scattering study of dynamic precipitation in an Al-Zn-Mg-Cu alloy. Philosophical Magazine 83:6, pages 677-692.
Read now
Read now
Articles from other publishers (75)
Jiongshen Chen, Li Rong, Hui Huang, Chenxi Ma, Wu Wei, Shengping Wen, Zezhong Wang & Zuoren Nie. (2024) The effects of η phases and Al3(Er, Zr) particles pre-precipitation on the hot workability and recrystallization of Al–Zn–Mg–Er–Zr alloy. Journal of Materials Research and Technology 29, pages 2414-2424.
Crossref
Crossref
Xiuzhen Zhang, Chao Yang, Lei Meng, Zhenghao Chen, Wu Gong, Binhan Sun, Shiteng Zhao, Deliang Zhang, Yue Li & Dengshan Zhou. (2024) The influence of precipitation on plastic deformation in a high Mg-containing AlMgZn-based crossover alloy: Slip localization and strain hardening. International Journal of Plasticity 173, pages 103896.
Crossref
Crossref
Farnousheh Sharifian Amiri, Seyed Jamal Hosseinipour, Hamed Jamshidi Aval & Roohollah Jamaati. (2024) Evaluation of strength and electrical conductivity of copper clad-AA6063 bimetallic composite wire after annealing treatment. Materials Chemistry and Physics 312, pages 128660.
Crossref
Crossref
Philip Aster, Phillip Dumitraschkewitz, Peter J. Uggowitzer, Florian Schmid, Georg Falkinger, Katharina Strobel, Peter Kutlesa, Michael Tkadletz & Stefan Pogatscher. (2023) Strain-induced clustering in Al alloys. Materialia 32, pages 101964.
Crossref
Crossref
Yeonju Noh, Min-Su Lee, Umer Masood Chaudry & Tea-Sung Jun. (2023) Effect of strain rate on the deformation of 6061-T6 aluminum alloy at cryogenic temperature. Materials Characterization 206, pages 113403.
Crossref
Crossref
Wahaz Nasim, Tarang Mungole, Mert Efe & Aashish Rohatgi. (2023) Simultaneous improvement in strength and ductility in 7xxx Al through a combination of natural aging and deformation. Materials Science and Engineering: A 884, pages 145566.
Crossref
Crossref
Nguyen Q. Chinh, Dániel Olasz, Anwar Q. Ahmed, Elena V. Bobruk & Ruslan Z. Valiev. (2023) Review on Grain Size- and Grain Boundary Phenomenon in Unusual Mechanical Behavior of Ultrafine-Grained Al Alloys. MATERIALS TRANSACTIONS 64:8, pages 1844-1855.
Crossref
Crossref
Meng Liu, Quanyi Wang, Yifan Cai, Dong Lu, Yubing Pei, Hong Zhang, Yongjie Liu & Qingyuan Wang. (2022) Dependence on Manufacturing Directions of Tensile Behavior and Microstructure Evolution of Selective Laser Melting Manufactured Inconel 625. Journal of Materials Engineering and Performance 32:16, pages 7488-7500.
Crossref
Crossref
Emad Scharifi, Victoria A. Yardley, Ursula Weidig, Damian Szegda, Jianguo Lin & Kurt Steinhoff. (2023) Hot Sheet Metal Forming Strategies for High‐Strength Aluminum Alloys: A Review—Fundamentals and Applications. Advanced Engineering Materials 25:16.
Crossref
Crossref
Myung-Sung Kim, Taehyun Lee, Yeonhong Son, Junesung Park, Minsung Kim, Hyeonjun Eun, Jong-Won Park & Yongjin Kim. (2022) Metallic Material Evaluation of Liquid Hydrogen Storage Tank for Marine Application Using a Tensile Cryostat for 20 K and Electrochemical Cell. Processes 10:11, pages 2401.
Crossref
Crossref
Xiuzhen Zhang, Dengshan Zhou, Yue Li & Deliang Zhang. (2022) Concurrent dynamic strain aging and dynamic precipitation evades strength-ductility trade-off in a high Mg-content aluminum crossover alloy. Materials Science and Engineering: A 854, pages 143800.
Crossref
Crossref
Ren jie Dai, Kun kun Deng, Cui ju Wang, Kai bo Nie, Guo wei Zhang & Wei Liang. (2022) Effects of precipitates and solute atoms on the work hardening and softening behavior of Zn-rich aluminum alloy. Materials Science and Engineering: A 848, pages 143388.
Crossref
Crossref
Z.Z. Song, R.M. Niu, X.Y. Cui, E.V. Bobruk, M. Murashkin, N.A. Enikeev, R.Z. Valiev, S.P. Ringer & X.Z. Liao. (2022) Room-temperature-deformation-induced chemical short-range ordering in a supersaturated ultrafine-grained Al-Zn alloy. Scripta Materialia 210, pages 114423.
Crossref
Crossref
Maowen Liu, Ruixiao Zheng, Wenlong Xiao, Jin Li, Guodong Li, Qiuming Peng & Chaoli Ma. (2021) Bulk nanostructured Al-Si alloy with remarkable improvement in strength and ductility. Scripta Materialia 201, pages 113970.
Crossref
Crossref
Francois-Xavier Hoche, Loeïz Naze, Luc Remy, Alain Köster & Pierre Osmond. (2021) Effect of Thermomechanical Fatigue on Precipitation Microstructure in Two Precipitation-Hardened Cast Aluminum Alloys. Metallurgical and Materials Transactions A 52:8, pages 3232-3246.
Crossref
Crossref
Joseph Indeck, Gabriel Demeneghi, Jason Mayeur, Cyril Williams & Kavan Hazeli. (2021) Influence of reversible and non-reversible fatigue on the microstructure and mechanical property evolution of 7075-T6 aluminum alloy. International Journal of Fatigue 145, pages 106094.
Crossref
Crossref
Peng Zhang, Kunkun Shi, Jianjun Bian, Jinyu Zhang, Yong Peng, Gang Liu, Alexis Deschamps & Jun Sun. (2021) Solute cluster evolution during deformation and high strain hardening capability in naturally aged Al–Zn–Mg alloy. Acta Materialia 207, pages 116682.
Crossref
Crossref
Lukas Stemper, Matheus A. Tunes, Phillip Dumitraschkewitz, Francisca Mendez-Martin, Ramona Tosone, Daniel Marchand, William A. Curtin, Peter J. Uggowitzer & Stefan Pogatscher. (2021) Giant hardening response in AlMgZn(Cu) alloys. Acta Materialia 206, pages 116617.
Crossref
Crossref
A. Lervik, E. Thronsen, J. Friis, C.D. Marioara, S. Wenner, A. Bendo, K. Matsuda, R. Holmestad & S.J. Andersen. (2021) Atomic structure of solute clusters in Al–Zn–Mg alloys. Acta Materialia 205, pages 116574.
Crossref
Crossref
W.U. Mirihanage, J.D. Robson, S. Mishra, P. Hidalgo-Manrique, J. Quinta da Fonseca, C.S. Daniel, P.B. Prangnell, S. Michalik, O.V. Magdysyuk, T. Connolley & M. Drakopoulos. (2021) Direct observation of the dynamic evolution of precipitates in aluminium alloy 7021 at high strain rates via high energy synchrotron X-rays. Acta Materialia 205, pages 116532.
Crossref
Crossref
J. D. Robson. (2020) Deformation Enhanced Diffusion in Aluminium Alloys. Metallurgical and Materials Transactions A 51:10, pages 5401-5413.
Crossref
Crossref
Muhammad Abubaker Khan, Yangwei Wang, Ghulam Yasin, Faisal Nazeer, Abdul Malik, Waheed Qamar Khan, Tahir Ahmad, Hao Zhang & Mohamed A. Afifi. (2020) The effect of strain rates on the microstructure and the mechanical properties of an over-aged Al-Zn-Mg-Cu alloy. Materials Characterization 167, pages 110472.
Crossref
Crossref
Mohamed A. Afifi, Ying Chun Wang & Terence G. Langdon. (2020) Effect of dynamic plastic deformation on the microstructure and mechanical properties of an Al–Zn–Mg alloy. Materials Science and Engineering: A 784, pages 139287.
Crossref
Crossref
Suhas Eswarappa Prameela, Peng Yi, Beatriz Medeiros, Vance Liu, Laszlo J. Kecskes, Michael L. Falk & Timothy P. Weihs. (2020) Deformation assisted nucleation of continuous nanoprecipitates in Mg–Al alloys. Materialia 9, pages 100583.
Crossref
Crossref
Suhas Eswarappa Prameela, Elaine Lipkin, Joey Chen, Laszlo Kecskes, Zhigang Xu & Timothy Weihs. (2020) Enhanced Precipitation and Recrystallization in a Mg-Zn Alloy During Low-Temperature Extrusion. Procedia Manufacturing 47, pages 1476-1480.
Crossref
Crossref
Sunpreet Singh, Chander Prakash & Munish K. Gupta. 2020. Materials Forming, Machining and Post Processing. Materials Forming, Machining and Post Processing
75
91
.
Mohamed A. Afifi, Ying Chun Wang, Xingwang Cheng, Shukui Li & Terence G. Langdon. (2019) Strain rate dependence of compressive behavior in an Al-Zn-Mg alloy processed by ECAP. Journal of Alloys and Compounds 791, pages 1079-1087.
Crossref
Crossref
X.L. Ma, Suhas Eswarappa Prameela, Peng Yi, Matthew Fernandez, Nicholas M. Krywopusk, Laszlo J. Kecskes, Tomoko Sano, Michael L. Falk & Timothy P. Weihs. (2019) Dynamic precipitation and recrystallization in Mg-9wt.%Al during equal-channel angular extrusion: A comparative study to conventional aging. Acta Materialia 172, pages 185-199.
Crossref
Crossref
Chia-Wei Lin, Kuan-Jen Chen, Fei-Yi Hung, Truan-Sheng Lui & Hsuan-Po Chen. (2019) Impact of solid-solution treatment on microstructural characteristics and formability of rotary-swaged 2024 alloy tubes. Journal of Materials Research and Technology 8:3, pages 3137-3148.
Crossref
Crossref
Ming-Hsiang Ku, Fei-Yi Hung & Truan-Sheng Lui. (2019) Examination of the High Tensile Ductility Improvement in an As-Solutionized AA7075 Alloy with the Aid of a Friction Stir Process. Metals 9:2, pages 196.
Crossref
Crossref
S. Vigneshwaran, K. Sivaprasad, R. Narayanasamy & K. Venkateswarlu. (2019) Microstructure and mechanical properties of Al – 3Mg – 0.25 Sc alloy sheets produced by cryorolling. Materials Science and Engineering: A 740-741, pages 49-62.
Crossref
Crossref
Christophe Sigli, Frédéric De Geuser, Alexis Deschamps, Joël Lépinoux & Michel Perez. (2018) Recent advances in the metallurgy of aluminum alloys. Part II: Age hardening. Comptes Rendus. Physique 19:8, pages 688-709.
Crossref
Crossref
Ming-Hsiang Ku, Fei-Yi Hung, Truan-Sheng Lui & Jyun-Jhih Lai. (2018) Enhanced Formability and Accelerated Precipitation Behavior of 7075 Al Alloy Extruded Rod by High Temperature Aging. Metals 8:8, pages 648.
Crossref
Crossref
Qinglong Zhao, Huidi Zhang, Xiaoxian Zhang, Feng Qiu & Qichuan Jiang. (2018) Enhanced elevated-temperature mechanical properties of Al-Mn-Mg containing TiC nano-particles by pre-strain and concurrent precipitation. Materials Science and Engineering: A 718, pages 305-310.
Crossref
Crossref
Y. C. Lin, Yu‐Qiang Jiang, Jin‐Long Zhang & Xiao‐Min Chen. (2017) Influence of Stress‐Aging Processing on Precipitates and Mechanical Properties of a 7075 Aluminum Alloy. Advanced Engineering Materials 20:1.
Crossref
Crossref
Haichun Jiang, Stefanie Sandlöbes, Günter Gottstein & Sandra Korte-Kerzel. (2017) On the effect of precipitates on the cyclic deformation behavior of an Al–Mg–Si alloy. Journal of Materials Research 32:23, pages 4398-4410.
Crossref
Crossref
Y. Cai, L. Wan, Z.H. Guo, C.Y. Sun, D.J. Yang, Q.D. Zhang & Y.L. Li. (2017) Hot deformation characteristics of AZ80 magnesium alloy: Work hardening effect and processing parameter sensitivities. Materials Science and Engineering: A 687, pages 113-122.
Crossref
Crossref
Mohamed A. Afifi, Pedro Henrique R. Pereira, Ying Chun Wang, Yangwei Wang, Shukui Li & Terence G. Langdon. (2017) Effect of ECAP processing on microstructure evolution and dynamic compressive behavior at different temperatures in an Al-Zn-Mg alloy. Materials Science and Engineering: A 684, pages 617-625.
Crossref
Crossref
S. Vigneshwaran, K.S.V.B.R. Krishna, K.Chandra Sekhar, K. Sivaprasad, K. Venkateswarlu & R. Narayanasamy. (2016) A study on the work hardening and the effect of triaxiality on the fracture behaviour of some cryorolled aluminium alloys. Materials Science and Engineering: A 678, pages 165-177.
Crossref
Crossref
Saeed Khani Moghanaki & Mohsen Kazeminezhad. (2016) Modeling of the mutual effect of dynamic precipitation and dislocation density in age hardenable aluminum alloys. Journal of Alloys and Compounds 683, pages 527-532.
Crossref
Crossref
Emine Acer, Emin Çadırlı, Harun Erol, Talip Kırındı & Mehmet Gündüz. (2016) Effect of heat treatment on the microstructures and mechanical properties of Al-5.5Zn-2.5Mg alloy. Materials Science and Engineering: A 662, pages 144-156.
Crossref
Crossref
Patrick T Summers, Yanyun Chen, Christian M Rippe, Ben Allen, Adrian P Mouritz, Scott W Case & Brian Y Lattimer. (2015) Overview of aluminum alloy mechanical properties during and after fires. Fire Science Reviews 4:1.
Crossref
Crossref
Ø Ryen, B Holmedal, K Marthinsen & T Furu. (2015) Precipitation, strength and work hardening of age hardened aluminium alloys. IOP Conference Series: Materials Science and Engineering 89, pages 012013.
Crossref
Crossref
M. Jobba, R.K. Mishra & M. Niewczas. (2015) Flow stress and work-hardening behaviour of Al–Mg binary alloys. International Journal of Plasticity 65, pages 43-60.
Crossref
Crossref
Yuna Wu, Hengcheng Liao, Yabing Liu & Kexin Zhou. (2014) Dynamic precipitation of Mg2Si induced by temperature and strain during hot extrusion and its impact on microstructure and mechanical properties of near eutectic Al–Si–Mg–V alloy. Materials Science and Engineering: A 614, pages 162-170.
Crossref
Crossref
Peter Lang, Thomas Weisz, Mohammad Reza Ahmadi, Erwin Povoden-Karadeniz, Ahmad Falahati & Ernst Kozeschnik. (2014) Thermo-Kinetic Simulation of the Yield Strength Evolution of AA7075 during Natural Aging. Advanced Materials Research 922, pages 406-411.
Crossref
Crossref
Y. Zhang, B. Milkereit, O. Kessler, C. Schick & P.A. Rometsch. (2014) Development of continuous cooling precipitation diagrams for aluminium alloys AA7150 and AA7020. Journal of Alloys and Compounds 584, pages 581-589.
Crossref
Crossref
Friedrich OstermannFriedrich Ostermann. 2014. Anwendungstechnologie Aluminium. Anwendungstechnologie Aluminium
271
418
.
Y. Chen, M. Weyland & C.R. Hutchinson. (2013) The effect of interrupted aging on the yield strength and uniform elongation of precipitation-hardened Al alloys. Acta Materialia 61:15, pages 5877-5894.
Crossref
Crossref
Y. J. Lang, L. G. Hou, W. T. Huo, H. Cui, J. C. Liu, L. Z. Zhuang & J. S. Zhang. 2013. PRICM. PRICM
2435
2442
.
X. Li, W. Qi, K. Zheng & N. Zhou. (2013) Enhanced strength and ductility of Mg–Gd–Y–Zr alloys by secondary extrusion. Journal of Magnesium and Alloys 1:1, pages 54-63.
Crossref
Crossref
Y. J. Lang, L. G. Hou, W. T. Huo, H. Cui, J. C. Liu, L. Z. Zhuang & J. S. Zhang. 2016. Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing. Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing
2435
2442
.
C.R. Hutchinson, F. de Geuser & A. Deschamps. 2012. ICAA13: 13th International Conference on Aluminum Alloys. ICAA13: 13th International Conference on Aluminum Alloys
1101
1106
.
A. Deschamps, G. Fribourg, Y. Bréchet, J.L. Chemin & C.R. Hutchinson. (2012) In situ evaluation of dynamic precipitation during plastic straining of an Al–Zn–Mg–Cu alloy. Acta Materialia 60:5, pages 1905-1916.
Crossref
Crossref
A. Simar, Y. Bréchet, B. de Meester, A. Denquin, C. Gallais & T. Pardoen. (2012) Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties. Progress in Materials Science 57:1, pages 95-183.
Crossref
Crossref
C. R. Hutchinson, F. de Geuser & A. Deschamps. 2016. ICAA13 Pittsburgh. ICAA13 Pittsburgh
1101
1106
.
K. Gopala Krishna, Nidhi Singh, K. Venkateswarlu & K. C. Hari Kumar. (2011) Tensile Behavior of Ultrafine-Grained Al-4Zn-2Mg Alloy Produced by Cryorolling. Journal of Materials Engineering and Performance 20:9, pages 1569-1574.
Crossref
Crossref
G. Fribourg, Y. Bréchet, A. Deschamps & A. Simar. (2011) Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy. Acta Materialia 59:9, pages 3621-3635.
Crossref
Crossref
W.J. Poole, J.D. Embury & D.J. Lloyd. 2011. Fundamentals of Aluminium Metallurgy. Fundamentals of Aluminium Metallurgy
307
344
.
Magnus Hörnqvist & Birger Karlsson. (2010) Dynamic strain ageing and dynamic precipitation in AA7030 during cyclic deformation. Procedia Engineering 2:1, pages 265-273.
Crossref
Crossref
Magnus Hörnqvist & Birger Karlsson. (2009) Effect of heat treatment on the strain hardening behaviour of an Al–Zn–Mg alloy. International Journal of Materials Research 100:11, pages 1574-1581.
Crossref
Crossref
J. Mittra, J.S. Dubey, U.D. Kulkarni & G.K. Dey. (2009) Role of dislocation density in raising the stage II work-hardening rate of Alloy 625. Materials Science and Engineering: A 512:1-2, pages 87-91.
Crossref
Crossref
Dong-Yeob Park & Marek Niewczas. (2008) Plastic deformation of Al and AA5754 between 4.2K and 295K. Materials Science and Engineering: A 491:1-2, pages 88-102.
Crossref
Crossref
Medhat Awad El-Hadek & Magdy Kassem. (2008) Characterization of strengthened rapidly quenched Zr-based alloys. International Journal of Mechanics and Materials in Design 4:3, pages 279-289.
Crossref
Crossref
A. Simar, Y. Bréchet, B. de Meester, A. Denquin & T. Pardoen. (2008) Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6. Materials Science and Engineering: A 486:1-2, pages 85-95.
Crossref
Crossref
Ahmet Karaaslan, Isik Kaya & Hakan Atapek. (2008) Tensile Strength and Impact Toughness of an AA 7075-T6 Alloy. Materials Testing 50:5, pages 256-258.
Crossref
Crossref
A. Simar, Y. Bréchet, B. de Meester, A. Denquin & T. Pardoen. (2007) Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6. Acta Materialia 55:18, pages 6133-6143.
Crossref
Crossref
A. Karaaslan, I. Kaya & H. Atapek. (2007) Effect of aging temperature and of retrogression treatment time on the microstructure and mechanical properties of alloy AA 7075. Metal Science and Heat Treatment 49:9-10, pages 443-447.
Crossref
Crossref
. 2007. Anwendungstechnologie Aluminum. Anwendungstechnologie Aluminum
279
398
.
Y.F. Sun, B.C. Wei, Y.R. Wang, W.H. Li & C.H. Shek. (2011) Enhanced Plasticity of Zr-based Bulk Metallic Glass Matrix Composite with Ductile Reinforcement. Journal of Materials Research 20:9, pages 2386-2390.
Crossref
Crossref
D. Dumont, A. Deschamps & Y. Brechet. (2003) On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy. Materials Science and Engineering: A 356:1-2, pages 326-336.
Crossref
Crossref
R Ferragut, A Somoza & I Torriani. (2002) Pre-precipitation study in the 7012 Al–Zn–Mg–Cu alloy by electrical resistivity. Materials Science and Engineering: A 334:1-2, pages 1-5.
Crossref
Crossref
S Esmaeili, L.M Cheng, A Deschamps, D.J Lloyd & W.J Poole. (2001) The deformation behaviour of AA6111 as a function of temperature and precipitation state. Materials Science and Engineering: A 319-321, pages 461-465.
Crossref
Crossref
G. Waterloo, V. Hansen, J. Gjønnes & S.R. Skjervold. (2001) Effect of predeformation and preaging at room temperature in Al–Zn–Mg–(Cu,Zr) alloys. Materials Science and Engineering: A 303:1-2, pages 226-233.
Crossref
Crossref
Dengshan Zhou, Xiuzhen Zhang, Yue Li & Deliang Zhang. (2022) Concurrent Dynamic Strain Aging and Dynamic Precipitation Evades Strength-Ductility Trade-Off in a High Mg-Content Aluminum Crossover Alloy. SSRN Electronic Journal.
Crossref
Crossref